Создал скрипт как его запустить?

Hello =F5=D7=C1=D6=C1=C5=CD=D9=C5.
=F0=CF=C4=D3=CB=C1=D6=C9=D4=C5 =CF=D4=D7=C5=D4 =CE=C1 =CF=C4=C9=CE =D7=CF=
=D0=D2=CF=D3. =EB=D5=C4=C1 =CE=C5=CF=C2=C8=CF=C4=C9=CD=CF =D0=CF=CD=C5=D3=
=D4=C9=D4=D8 =D3=CB=D2=C9=D0=D4 =C9 =CB=C1=CB=CF=C5
=D2=C1=D3=DB=C9=D2=C5=CE=C9=C5 =C6=C1=CA=CC=D5 =CE=C5=CF=C2=C8=CF=C4=C9=CD=
=CF =C4=C1=D4=D8 =C4=CC=D1 =D4=CF=C7=CF, =DE=D4=CF=C2=D9 =D1 =CD=CF=C7 =DA=
=C1=D0=D5=D3=CB=C1=D4=D8 =C4=C1=CE=CE=D9=CA
=C6=C1=CA=CC =D7 =CE=D5=D6=CE=D9=CA =CD=CF=CD=C5=CE=D4 =D0=D5=D4=C5=CD =CB=
=CC=C9=CB=C1 =D0=CF =CE=C5=CD=D5?
=ED=CE=C5 =CE=D5=D6=CE=CF =C4=D7=C1 =C6=C1=CA=CC=C1:

1=D9=CA =C4=CC=D1 =DA=C1=D0=D5=D3=CB=C1
scanon:
---
modprobe g_NCR5380 ncr_addr=3D0x280 dtc_3181e=3D1
---

2=CF=CA =C4=CC=D1 =CF=D3=D4=C1=CE=CF=D7=CB=C9:
scanoff:
---
rmmod g_NCR5380
rmmod sg
---

=E9 =C5=DD=C5.  =E5=D3=D4=D8 =CC=C9 =D7 Linux =CB=C1=D4=C1=CC=CF=C7 =C4=CC=
=D1 =C1=D7=D4=CF=DA=C1=C7=D2=D5=DA=CB=C9 =D0=CF=C4=CF=C2=CE=D9=C8 =D3=CB=D2=
=C9=D0=D4=CF=D7 =D0=D2=C9
=D7=D7=C8=CF=C4=C5 =D7 =D3=C9=D3=D4=C5=CD=D5?


--=20
Best regards,
 znet_lan                            mailto:[email protected]