Re: [Security Firewall] Problem with port forwarding

One thing to try to eliminate certain things. Have you tried to connect to the 
ftp machine from an external machine? I assume you have the NAT all 
configured correctly for this machine (i.e. you are not trying to access it 
externally via its internal address)?

Cheers
On Tuesday 14 Jun 2005 10:06, ibon M. B. wrote:
> Thanks for your help
> I have created a custom rule to forward the ftp traffic to a computer in my
> lan, but port forwarding doesn´t seem to work.
> Custom Rule:
> Result --DNAT
> Predefined Services--FTP
> Protocol--FTP
> Client:WAN
> Server:LAN 192.168.1.100
> Forwarding Address:all
>
> i can connect the ftp server inside the lan, but not outside.
> any ideas?
>
>
>
>
>
> _____________________________________________________________________
> This message has been checked for all known viruses by Minuco delivered
> through the MessageLabs Virus Scanning Service. For further infomation
> visit http://www.minuco.com or alternatively mail [email protected]

-- 
Best regards
Neill Mitchell

Minuco Vigilize
31 Museum Street, London, WC1A 1LG

T: +44 (0)20 7692 2649
F: +44 (0)20 7436 9955

http://www.minuco.com <http://www.minuco.com/> 

You have received this e-mail from Minuco. It is intended to be read by
the addressee because it could contain confidential and privileged
information (including any attachments). If you are not the person or
organisation this e-mail was intended for please return it to the sender
and delete it from your computer(s). You must not copy, distribute,
disclose, or disseminate the contents of this e-mail or its attachments
to any third party unless authorised by Minuco.

It is the responsibility of the recipient to ensure that the forwarding,
opening or use of the e-mail (and any attachments) will not adversely
affect their systems or data. Please carry out appropriate virus checks.

All rights reserved. The intellectual property in this e-mail and any
attachments are vested solely in Minuco.