[Security Firewall] APC UPS problem

Hi everyone,

I recently installed a MNF2 server due to Ethernet driver problem with
the MNF (8.2) version.

The problem we have is that in the MNF we used the apcupsd program to
protect the system and make the server to shutdown automatically when
the battery level is low, but with the MNF2 one the program does not
detect the ups in the device /dev/usb/hiddev[0-15]...

The hid driver is loaded because when we issue the command "lsusb" or
"cat /proc/bus/usb/*" we can see that the ups is there...even we do a
"dmesg | grep hiddev" and the result is "hiddev0 .... APC UPS...." so in
the configuration file should be /dev/usb/hiddev0.

If anybody con suggest something we will appreciate.

Thanks.

____________________________________________________
Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com
____________________________________________________