Re: new beta of 33.0 is now available

Hello Bruno,

To begin with, you may be interested to know that my / and /home are 
mounted on an LVM volume (that helps me to study LVM)

So, I went further than last time : here are the details :

- I installed : afio, buffer and lzop from the OS
- as I did previously, I got

ftp://mondo.mirror.pclark.com/pub/mondorescue/ubuntu/14.04/libprojectbuilder-perl_0.14.2-1_all.deb

and then

ftp://mondo.mirror.pclark.com/pub/mondorescue/test/ubuntu/16.04/mondo_3.3.1-0.20170315045057.s3654_amd64.deb
ftp://mondo.mirror.pclark.com/pub/mondorescue/test/ubuntu/16.04/mindi-busybox_1.25.1-1_amd64.deb
ftp://mondo.mirror.pclark.com/pub/mondorescue/test/ubuntu/16.04/mindi_3.3.1-0.20170315045057.s3654_amd64.deb
ftp://mondo.mirror.pclark.com/pub/mondorescue/test/ubuntu/16.04/libmondorescue-perl_3.3.1-0.20170315045057.s3654_all.deb

Installation OK, first backup OK with the following commands

mount -t nfs power4:/backup_rubedo /backup_rubedo
mondoarchive -g -On  nfs://power4:/backup_rubedo -N -d tharv/`date 
+'%Y%U'` -p "tharv-full-`date +'%Y%m%d'`" -s 20g -L  -V

recovering one random file with mondorestore -g went well.

Now, I never practised the mondorestore syntax, so i am pretty 
uncomfortable and clumsy with it. I wanted to boot in compare mode, but 
from the ascii gui, I failed to figure out the right parameters. So I 
created an empty VM and tried to restore in nuke mode : it started well, 
created the LVM volumes, and then it failed, saying that it was not able 
to mount a volume. I am attaching the log. To be honest, when it began, 
I was not sure that I was inputting the right parameters - but it 
started nonetheless ... but I may have done something wrong ...

What should I do now ? While I am waiting your answer, i may train with 
mondorestore's syntax ..

-- 
Robert Grasso
@home
---
UNIX was not designed to stop you from doing stupid things, because
   that would also stop you from doing clever things. -- Doug Gwyn

On 15/03/2017 11:10, Bruno Cornec wrote:
> Thanks Robert,
>
> I've rebuild a new version there for you to test, so you'll really get the latest as of today :-)
>
> Bruno.
>
> Robert Grasso said on Tue, Mar 14, 2017 at 07:49:12PM +0100:
>
>> Thank you Bruno,
>>
>> I will test this next week-end and will let you know
>>
>> -- 
>> Robert Grasso
>> @home
>> ---
>> UNIX was not designed to stop you from doing stupid things, because
>>    that would also stop you from doing clever things. -- Doug Gwyn
>>
>> On 08/03/2017 16:33, Bruno Cornec wrote:
>>> Hello Robert,
>>>
>>> Sorry it took me time to be able to work on this. I think I found why the problem occurred, which is linked to the fact I do very rarely live restore (I mostly work in DR mode).
>>> So in live mode, it seems one variable was uncorrectly handled indeed causing the issue you reported.
>>>
>>> I have generated new test packages for you to try at ftp://ftp.mondorescue.org/test/ubuntu/16.04
>>>
>>> Thanks for your report and support.
>>> Bruno.
>>>
>>> Robert Grasso said on Mon, Jan 30, 2017 at 01:53:48AM +0100:
>>>
>>>> Hello Bruno,
>>>>
>>>> So, here is my test. First, with the installation :
>>>> - so first, I downloaded and installed
>>>> libprojectbuilder-perl_0.14.2-1_all.deb from the stable branch as you
>>>> suggested (first I made a mistake, I downloaded and installed
>>>> libmondorescue-perl_3.2.2-1_all.deb, and forgot to remove it)
>>>> - then as I tried before, I just ran
>>>>
>>>> apt install mondo
>>>>
>>>> I attached it s output; so because of the previous error, we do not
>>>> see libmondorescue-perl, I then updated the whole OS which updated
>>>> libmondorescue-perl as well
>>>>
>>>> then I ran the backup with the command
>>>>
>>>> mondoarchive -g -On  nfs://power4:/backup_rubedo -N -d tharv/`date
>>>> +'%Y%U'` -p "tharv-full-`date +'%Y%m%d'`" -s 20g -L -S /scratch/ -T
>>>> /scratch/ -V
>>>>
>>>> which went well : the log is attached
>>>>
>>>> then I ran mondorestore with the command :
>>>>
>>>> mondorestore -g -n nfs://power4:/backup_rubedo -d tharv/201705 -p
>>>> tharv-full-20170129
>>>>
>>>> which did not went well : it wrote "Thinking", 1%, then it segfaulted.
>>>> The log is attached.
>>>>
>>>> --
>>>> Robert Grasso
>>>> @home
>>>> ---
>>>> UNIX was not designed to stop you from doing stupid things, because
>>>>    that would also stop you from doing clever things. -- Doug Gwyn
>>>>
>>>> On 26/01/2017 00:48, Bruno Cornec wrote:
>>>>> Robert Grasso said on Wed, Jan 25, 2017 at 09:25:21PM +0100:
>>>>>> ntfsprogs is what we used to find in previous Debian/Ubuntu distros, it
>>>>>> looks like in v16.04.1 it is called :
>>>>>>
>>>>>> ntfs-3g - read/write NTFS driver for FUSE
>>>>> Thanks Robert, now fixed with
>>>>> http://trac.project-builder.org/changeset/2174
>>>>>
>>>>> Bruno.
>>>> ------------------------------------------------------------------------------
>>>> Check out the vibrant tech community on one of the world's most
>>>> engaging tech sites, SlashDot.org! http://sdm.link/slashdot
>>>> _______________________________________________
>>>> Mondo-devel mailing list
>>>> [email protected]
>>>> https://lists.sourceforge.net/lists/listinfo/mondo-devel
>>
>> ------------------------------------------------------------------------------
>> Check out the vibrant tech community on one of the world's most
>> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
>> _______________________________________________
>> Mondo-devel mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/mondo-devel

------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot

_______________________________________________
Mondo-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/mondo-devel