Re: Mondo Recover issue
"Brad Burt" <[email protected]>
| Newsgroups | gmane.linux.mondo.devel |
|---|---|
| Message-ID | <[email protected]> |
Hello, I had a system crash that would not allow me to boot. I'm trying to restore from the 66 CD's I made using the Mondo Rescue program. It's a Dell server running RHEL 5, and I have an iSCSI target on Synology NAS to increase the storage capacity of system. After I type 'Nuke', I'm getting the attached errors, any help resolving would be most appreciated. Nothing has changed with the hardware other than I changed the RAID configuration from 0 to 5 on the server, and Synology NAS from RAID 0 to Synology Hybrid RAID (SHR). I'm told Mondo Rescue can handle a change in RAID configuration so I don't believe this is the issue. I think the issue is that the Recover cannot, or does not, recognize the iSCSI target on Synology NAS, as it's not seeing the Synology file system. On the "Editing mountlist" page the error is /dev/sda does not exist The mount list in Mondo Rescue looks like this: /dev/sda1 lvm lvm 0 /dev/sda2 lvm lvm 699415 /dev/VolGroup00/LogVol00 / ext3 0 /dev/sdb1 /boot ext3 85 /dev/VolGroup00/LogVol01 swap swap 0 I have a 2TB iSCSI LUN on the Synology NAS that the Restore cannot find. Any help in figuring out how I can Restore would be most appreciated. Best regards, Brad Burt ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Mondo-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mondo-devel