Re: This is an error reported in the recovery log
夏为丁 <[email protected]>
| Newsgroups | gmane.linux.mondo.devel |
|---|---|
| Message-ID | <[email protected]> |
Are these? 发自网易邮箱大师 On 7/17/2018 17:21，Josef Rick<[email protected]> wrote： It looklike my problems too. Can you report som line of the log, before your log started? Starting with fdisk....... Thanks a lot with regards Josef Von: 夏为丁 <[email protected]> Gesendet: Dienstag, 17. Juli 2018 07:34 An:[email protected] Betreff: [Mondo-devel] This is an error reported in the recovery log Please help me see how to solve it ! 发自网易邮箱大师 ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Mondo-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/mondo-devel
mondorestore.txt
(text/plain, 6.6 KB)
Command (m for help): Partition type:
p primary (0 primary, 0 extended, 4 free)
e extended
Select (default p): Partition number (1-4, default 1): First sector (2048-41943039, default 2048): Using default value 2048
Last sector, +sectors or +size{K,M,G} (2048-41943039, default 41943039): Partition 1 of type Linux and of size 1 GiB is set
Command (m for help): Command (m for help): Command (m for help):
Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x641a83a6
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
Command (m for help): Partition type:
p primary (1 primary, 0 extended, 3 free)
e extended
Select (default p): Partition number (2-4, default 2): First sector (2099200-41943039, default 2099200): Using default value 2099200
Last sector, +sectors or +size{K,M,G} (2099200-41943039, default 41943039): Value out of range.
Last sector, +sectors or +size{K,M,G} (2099200-41943039, default 41943039): Using default value 41943039
Partition 2 of type Linux and of size 19 GiB is set
Command (m for help): Command (m for help):
Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x641a83a6
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 41943039 19921920 83 Linux
Command (m for help): Partition number (1,2, default 2): Hex code (type L to list all codes): Changed type of partition 'Linux' to 'Linux LVM'
Command (m for help): Command (m for help): Command (m for help):
Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x641a83a6
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 41943039 19921920 8e Linux LVM
Command (m for help): Partition number (1,2, default 2): Hex code (type L to list all codes): Changed type of partition 'Linux LVM' to 'Linux LVM'
Command (m for help): Command (m for help): Command (m for help):
Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x641a83a6
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 41943039 19921920 8e Linux LVM
Command (m for help):
Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x641a83a6
Device Boot Start End Blocks Id System
/dev/sda1 2048 2099199 1048576 83 Linux
/dev/sda2 2099200 41943039 19921920 8e Linux LVM
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
Welcome to fdisk (util-linux 2.23.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): Partition number (1,2, default 2):
Command (m for help): Partition number (1,2, default 2):
Command (m for help):
Disk /dev/sda: 21.5 GB, 21474836480 bytes, 41943040 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x641a83a6
Device Boot Start End Blocks Id System
/dev/sda1 * 2048 2099199 1048576 83 Linux
/dev/sda2 * 2099200 41943039 19921920 8e Linux LVM
Command (m for help): The partition table has been altered!
Calling ioctl() to re-read partition table.
Syncing disks.
INFO: ------------------- end of fdisk.log... ------------------
INFO: Failed.
INFO: Errors may have occurred during the partitioning of your hard drives.
INFO: Warning. Errors occurred during partitioning.
INFO: Preparing to format your disk(s)
INFO: Please wait. This may take a few minutes.
DBG2: [Main] ../src/mondorestore/mondo-prep.c->format_everything#825: format_everything (mountlist, interactively = false
INFO: Formatting partitions
DBG1: [Main] ../src/mondorestore/mondo-prep.c->format_everything#832: Stopping all RAID devices
DBG1: [Main] ../src/mondorestore/mondo-prep.c->format_everything#838: Prepare soft-RAIDs
DBG2: [Main] ../src/mondorestore/mondo-prep.c->format_everything#841: Examining /dev/sda2
DBG2: [Main] ../src/mondorestore/mondo-prep.c->format_everything#841: Examining /dev/centos/root
DBG2: [Main] ../src/mondorestore/mondo-prep.c->format_everything#841: Examining /dev/sda1
DBG1: [Main] ../src/mondorestore/mondo-prep.c->format_everything#863: Creating LVMs
DBG2: [Main] ../src/mondorestore/mondo-rstr-tools.c->wait_until_software_raids_are_prepped#2274: wait_until_software_raids_are_prepped
INFO: Configuring LVM
DBG2: [Main] ../src/mondorestore/mondo-prep.c->do_my_funky_lvm_stuff#196: STARTING
DBG1: [Main] ../src/mondorestore/mondo-prep.c->do_my_funky_lvm_stuff#197: OK, opened i-want-my-lvm. Shutting down LVM volumes...
DBG4: [Main] libmondo-files.c->find_home_of_exe#360: find_home_of_exe --- Found lvm at /sbin/lvm
DBG1: [Main] ../src/mondorestore/mondo-prep.c->do_my_funky_lvm_stuff#238: OK, rewound i-want-my-lvm. Doing funky stuff...
INFO: lvm vgchange -an --> 0
INFO: echo y | lvm pvcreate -ff /dev/sda2 --> 0
INFO: lvm vgscan --> 0
DBG1: [Main] ../src/mondorestore/mondo-prep.c->do_my_funky_lvm_stuff#270: Deleting old entries at /dev/centos
INFO: running: rm -Rf /dev/centos > /tmp/mondo.tmp.ucMTiT/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.ucMTiT/mondo-run-prog-thing.err
INFO: --------------------------------start of output-----------------------------
INFO: --------------------------------end of output------------------------------
INFO: ...ran just fine. :-)
INFO: running: lvm vgscan > /tmp/mondo.tmp.ucMTiT/mondo-run-prog-thing.tmp 2> /tmp/mondo.tmp.ucMTiT/mondo-run-prog-thing.err