SF.net SVN: morphix: [2515] trunk

Revision: 2515
          http://svn.sourceforge.net/morphix/?rev=2515&view=rev
Author:   paul_c
Date:     2007-06-01 05:15:23 -0700 (Fri, 01 Jun 2007)

Log Message:
-----------
Delete a whole bunch of autotool generated files.. autom4te* only make sense
on a box that is running aclocal, and the rest are a byproduct of running
configure - These should not be redistributed !

Removed Paths:
-------------
    trunk/cloop/advancecomp-1.9_create_compressed_fs/config.log
    trunk/cloop/advancecomp-1.9_create_compressed_fs/config.status
    trunk/clusterix/openmosix-tools-0.3.6-2/config.log
    trunk/clusterix/openmosix-tools-0.3.6-2/config.status
    trunk/datetimeconf/autom4te.cache/
    trunk/datetimeconf/pixmaps/.xvpics/
    trunk/dialupconf/autom4te.cache/
    trunk/dialupconf/config.log
    trunk/dialupconf/config.status
    trunk/gpppoe-conf/autom4te.cache/
    trunk/gpppoe-conf/config.log
    trunk/gpppoe-conf/config.status
    trunk/gtkxrandr/autom4te.cache/
    trunk/gtkxrandr/config.log
    trunk/gtkxrandr/config.status
    trunk/ibuild/config.status
    trunk/isomorphgui/autom4te.cache/
    trunk/isomorphgui/config.log
    trunk/isomorphgui/config.status
    trunk/mcp/.xvpics/
    trunk/mcp/autom4te.cache/
    trunk/mcp/config.log
    trunk/mcp/config.status
    trunk/mcp2/.xvpics/
    trunk/networkconf/autom4te.cache/
    trunk/networkconf/config.log
    trunk/networkconf/config.status

Deleted: trunk/cloop/advancecomp-1.9_create_compressed_fs/config.log
===================================================================
--- trunk/cloop/advancecomp-1.9_create_compressed_fs/config.log	2007-06-01 12:05:51 UTC (rev 2514)
+++ trunk/cloop/advancecomp-1.9_create_compressed_fs/config.log	2007-06-01 12:15:23 UTC (rev 2515)
@@ -1,870 +0,0 @@
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by AdvanceCOMP configure 1.9, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  $ ./configure 
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = Koffer
-uname -m = i686
-uname -r = 2.4.24
-uname -s = Linux
-uname -v = #1 Di Jan 27 00:28:17 CET 2004
-
-/usr/bin/uname -p = unknown
-/bin/uname -X     = unknown
-
-/bin/arch              = i686
-/usr/bin/arch -k       = unknown
-/usr/convex/getsysinfo = unknown
-hostinfo               = unknown
-/bin/machine           = unknown
-/usr/bin/oslevel       = unknown
-/bin/universe          = unknown
-
-PATH: /home/knopper/bin
-PATH: /sbin
-PATH: /bin
-PATH: /usr/sbin
-PATH: /usr/bin
-PATH: /usr/X11R6/bin
-PATH: /usr/local/sbin
-PATH: /usr/local/bin
-PATH: /usr/games
-PATH: .
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1363: checking for a BSD-compatible install
-configure:1418: result: /usr/bin/install -c
-configure:1429: checking whether build environment is sane
-configure:1472: result: yes
-configure:1505: checking for gawk
-configure:1521: found /usr/bin/gawk
-configure:1531: result: gawk
-configure:1541: checking whether make sets $(MAKE)
-configure:1561: result: yes
-configure:1733: checking build system type
-configure:1751: result: i686-pc-linux-gnu
-configure:1759: checking host system type
-configure:1773: result: i686-pc-linux-gnu
-configure:1835: checking for g++
-configure:1851: found /usr/bin/g++
-configure:1861: result: g++
-configure:1877: checking for C++ compiler version
-configure:1880: g++ --version </dev/null >&5
-g++ (GCC) 3.3.2 (Debian)
-Copyright (C) 2003 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:1883: $? = 0
-configure:1885: g++ -v </dev/null >&5
-Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.2/specs
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f77,pascal,objc,ada,treelang --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared --with-system-zlib --enable-nls --without-included-gettext --enable-__cxa_atexit --enable-clocale=gnu --enable-debug --enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc i486-linux
-Thread model: posix
-gcc version 3.3.2 (Debian)
-configure:1888: $? = 0
-configure:1890: g++ -V </dev/null >&5
-g++: `-V' option must have argument
-configure:1893: $? = 1
-configure:1916: checking for C++ compiler default output file name
-configure:1919: g++    conftest.cc  >&5
-configure:1922: $? = 0
-configure:1968: result: a.out
-configure:1973: checking whether the C++ compiler works
-configure:1979: ./a.out
-configure:1982: $? = 0
-configure:1999: result: yes
-configure:2006: checking whether we are cross compiling
-configure:2008: result: no
-configure:2011: checking for suffix of executables
-configure:2013: g++ -o conftest    conftest.cc  >&5
-configure:2016: $? = 0
-configure:2041: result: 
-configure:2047: checking for suffix of object files
-configure:2068: g++ -c   conftest.cc >&5
-configure:2071: $? = 0
-configure:2093: result: o
-configure:2097: checking whether we are using the GNU C++ compiler
-configure:2121: g++ -c   conftest.cc >&5
-configure:2127: $? = 0
-configure:2130: test -z 			 || test ! -s conftest.err
-configure:2133: $? = 0
-configure:2136: test -s conftest.o
-configure:2139: $? = 0
-configure:2152: result: yes
-configure:2158: checking whether g++ accepts -g
-configure:2179: g++ -c -g  conftest.cc >&5
-configure:2185: $? = 0
-configure:2188: test -z 			 || test ! -s conftest.err
-configure:2191: $? = 0
-configure:2194: test -s conftest.o
-configure:2197: $? = 0
-configure:2208: result: yes
-configure:2250: g++ -c -g -O2  conftest.cc >&5
-configure:2256: $? = 0
-configure:2259: test -z 			 || test ! -s conftest.err
-configure:2262: $? = 0
-configure:2265: test -s conftest.o
-configure:2268: $? = 0
-configure:2294: g++ -c -g -O2  conftest.cc >&5
-conftest.cc: In function `int main()':
-conftest.cc:15: error: `exit' undeclared (first use this function)
-conftest.cc:15: error: (Each undeclared identifier is reported only once for 
-   each function it appears in.)
-configure:2300: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| /* end confdefs.h.  */
-| 
-| int
-| main ()
-| {
-| exit (42);
-|   ;
-|   return 0;
-| }
-configure:2250: g++ -c -g -O2  conftest.cc >&5
-configure:2256: $? = 0
-configure:2259: test -z 			 || test ! -s conftest.err
-configure:2262: $? = 0
-configure:2265: test -s conftest.o
-configure:2268: $? = 0
-configure:2294: g++ -c -g -O2  conftest.cc >&5
-configure:2300: $? = 0
-configure:2303: test -z 			 || test ! -s conftest.err
-configure:2306: $? = 0
-configure:2309: test -s conftest.o
-configure:2312: $? = 0
-configure:2381: checking for gcc
-configure:2397: found /usr/bin/gcc
-configure:2407: result: gcc
-configure:2651: checking for C compiler version
-configure:2654: gcc --version </dev/null >&5
-gcc (GCC) 3.3.2 (Debian)
-Copyright (C) 2003 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:2657: $? = 0
-configure:2659: gcc -v </dev/null >&5
-Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.2/specs
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f77,pascal,objc,ada,treelang --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared --with-system-zlib --enable-nls --without-included-gettext --enable-__cxa_atexit --enable-clocale=gnu --enable-debug --enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc i486-linux
-Thread model: posix
-gcc version 3.3.2 (Debian)
-configure:2662: $? = 0
-configure:2664: gcc -V </dev/null >&5
-gcc: `-V' option must have argument
-configure:2667: $? = 1
-configure:2670: checking whether we are using the GNU C compiler
-configure:2694: gcc -c   conftest.c >&5
-configure:2700: $? = 0
-configure:2703: test -z 			 || test ! -s conftest.err
-configure:2706: $? = 0
-configure:2709: test -s conftest.o
-configure:2712: $? = 0
-configure:2725: result: yes
-configure:2731: checking whether gcc accepts -g
-configure:2752: gcc -c -g  conftest.c >&5
-configure:2758: $? = 0
-configure:2761: test -z 			 || test ! -s conftest.err
-configure:2764: $? = 0
-configure:2767: test -s conftest.o
-configure:2770: $? = 0
-configure:2781: result: yes
-configure:2798: checking for gcc option to accept ANSI C
-configure:2868: gcc  -c -g -O2  conftest.c >&5
-configure:2874: $? = 0
-configure:2877: test -z 			 || test ! -s conftest.err
-configure:2880: $? = 0
-configure:2883: test -s conftest.o
-configure:2886: $? = 0
-configure:2904: result: none needed
-configure:2922: gcc -c -g -O2  conftest.c >&5
-conftest.c:2: error: parse error before "me"
-configure:2928: $? = 1
-configure: failed program was:
-| #ifndef __cplusplus
-|   choke me
-| #endif
-configure:3071: checking for a BSD-compatible install
-configure:3126: result: /usr/bin/install -c
-configure:3141: checking for gawk
-configure:3167: result: gawk
-configure:3181: checking for tar
-configure:3197: found /bin/tar
-configure:3207: result: tar
-configure:3221: checking for gzip
-configure:3237: found /bin/gzip
-configure:3247: result: gzip
-configure:3261: checking for groff
-configure:3277: found /usr/bin/groff
-configure:3287: result: groff
-configure:3301: checking for col
-configure:3317: found /usr/bin/col
-configure:3327: result: col
-configure:3341: checking for adler32 in -lz
-configure:3371: gcc -o conftest -g -O2   conftest.c -lz   >&5
-configure:3377: $? = 0
-configure:3380: test -z 			 || test ! -s conftest.err
-configure:3383: $? = 0
-configure:3386: test -s conftest
-configure:3389: $? = 0
-configure:3402: result: yes
-configure:3420: checking how to run the C preprocessor
-configure:3455: gcc -E  conftest.c
-configure:3461: $? = 0
-configure:3493: gcc -E  conftest.c
-conftest.c:15:28: ac_nonexistent.h: No such file or directory
-configure:3499: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define HAVE_LIBZ 1
-| /* end confdefs.h.  */
-| #include <ac_nonexistent.h>
-configure:3538: result: gcc -E
-configure:3562: gcc -E  conftest.c
-configure:3568: $? = 0
-configure:3600: gcc -E  conftest.c
-conftest.c:15:28: ac_nonexistent.h: No such file or directory
-configure:3606: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define HAVE_LIBZ 1
-| /* end confdefs.h.  */
-| #include <ac_nonexistent.h>
-configure:3650: checking for egrep
-configure:3660: result: grep -E
-configure:3665: checking for ANSI C header files
-configure:3690: gcc -c -g -O2  conftest.c >&5
-configure:3696: $? = 0
-configure:3699: test -z 			 || test ! -s conftest.err
-configure:3702: $? = 0
-configure:3705: test -s conftest.o
-configure:3708: $? = 0
-configure:3794: gcc -o conftest -g -O2   conftest.c -lz  >&5
-configure:3797: $? = 0
-configure:3799: ./conftest
-configure:3802: $? = 0
-configure:3817: result: yes
-configure:3841: checking for sys/types.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for sys/stat.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for stdlib.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for string.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for memory.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for strings.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for inttypes.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for stdint.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3841: checking for unistd.h
-configure:3857: gcc -c -g -O2  conftest.c >&5
-configure:3863: $? = 0
-configure:3866: test -z 			 || test ! -s conftest.err
-configure:3869: $? = 0
-configure:3872: test -s conftest.o
-configure:3875: $? = 0
-configure:3886: result: yes
-configure:3908: checking for unistd.h
-configure:3913: result: yes
-configure:3917: checking utime.h usability
-configure:3929: gcc -c -g -O2  conftest.c >&5
-configure:3935: $? = 0
-configure:3938: test -z 			 || test ! -s conftest.err
-configure:3941: $? = 0
-configure:3944: test -s conftest.o
-configure:3947: $? = 0
-configure:3957: result: yes
-configure:3961: checking utime.h presence
-configure:3971: gcc -E  conftest.c
-configure:3977: $? = 0
-configure:3997: result: yes
-configure:4032: checking for utime.h
-configure:4039: result: yes
-configure:3917: checking sys/utime.h usability
-configure:3929: gcc -c -g -O2  conftest.c >&5
-conftest.c:61:23: sys/utime.h: No such file or directory
-configure:3935: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define HAVE_LIBZ 1
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UTIME_H 1
-| /* end confdefs.h.  */
-| #include <stdio.h>
-| #if HAVE_SYS_TYPES_H
-| # include <sys/types.h>
-| #endif
-| #if HAVE_SYS_STAT_H
-| # include <sys/stat.h>
-| #endif
-| #if STDC_HEADERS
-| # include <stdlib.h>
-| # include <stddef.h>
-| #else
-| # if HAVE_STDLIB_H
-| #  include <stdlib.h>
-| # endif
-| #endif
-| #if HAVE_STRING_H
-| # if !STDC_HEADERS && HAVE_MEMORY_H
-| #  include <memory.h>
-| # endif
-| # include <string.h>
-| #endif
-| #if HAVE_STRINGS_H
-| # include <strings.h>
-| #endif
-| #if HAVE_INTTYPES_H
-| # include <inttypes.h>
-| #else
-| # if HAVE_STDINT_H
-| #  include <stdint.h>
-| # endif
-| #endif
-| #if HAVE_UNISTD_H
-| # include <unistd.h>
-| #endif
-| #include <sys/utime.h>
-configure:3957: result: no
-configure:3961: checking sys/utime.h presence
-configure:3971: gcc -E  conftest.c
-conftest.c:27:23: sys/utime.h: No such file or directory
-configure:3977: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define HAVE_LIBZ 1
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UTIME_H 1
-| /* end confdefs.h.  */
-| #include <sys/utime.h>
-configure:3997: result: no
-configure:4032: checking for sys/utime.h
-configure:4039: result: no
-configure:3917: checking stdarg.h usability
-configure:3929: gcc -c -g -O2  conftest.c >&5
-configure:3935: $? = 0
-configure:3938: test -z 			 || test ! -s conftest.err
-configure:3941: $? = 0
-configure:3944: test -s conftest.o
-configure:3947: $? = 0
-configure:3957: result: yes
-configure:3961: checking stdarg.h presence
-configure:3971: gcc -E  conftest.c
-configure:3977: $? = 0
-configure:3997: result: yes
-configure:4032: checking for stdarg.h
-configure:4039: result: yes
-configure:3917: checking varargs.h usability
-configure:3929: gcc -c -g -O2  conftest.c >&5
-In file included from conftest.c:62:
-/usr/lib/gcc-lib/i486-linux/3.3.2/include/varargs.h:4:2: #error "GCC no longer implements <varargs.h>."
-/usr/lib/gcc-lib/i486-linux/3.3.2/include/varargs.h:5:2: #error "Revise your code to use <stdarg.h>."
-configure:3935: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define HAVE_LIBZ 1
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UTIME_H 1
-| #define HAVE_STDARG_H 1
-| /* end confdefs.h.  */
-| #include <stdio.h>
-| #if HAVE_SYS_TYPES_H
-| # include <sys/types.h>
-| #endif
-| #if HAVE_SYS_STAT_H
-| # include <sys/stat.h>
-| #endif
-| #if STDC_HEADERS
-| # include <stdlib.h>
-| # include <stddef.h>
-| #else
-| # if HAVE_STDLIB_H
-| #  include <stdlib.h>
-| # endif
-| #endif
-| #if HAVE_STRING_H
-| # if !STDC_HEADERS && HAVE_MEMORY_H
-| #  include <memory.h>
-| # endif
-| # include <string.h>
-| #endif
-| #if HAVE_STRINGS_H
-| # include <strings.h>
-| #endif
-| #if HAVE_INTTYPES_H
-| # include <inttypes.h>
-| #else
-| # if HAVE_STDINT_H
-| #  include <stdint.h>
-| # endif
-| #endif
-| #if HAVE_UNISTD_H
-| # include <unistd.h>
-| #endif
-| #include <varargs.h>
-configure:3957: result: no
-configure:3961: checking varargs.h presence
-configure:3971: gcc -E  conftest.c
-In file included from conftest.c:28:
-/usr/lib/gcc-lib/i486-linux/3.3.2/include/varargs.h:4:2: #error "GCC no longer implements <varargs.h>."
-/usr/lib/gcc-lib/i486-linux/3.3.2/include/varargs.h:5:2: #error "Revise your code to use <stdarg.h>."
-configure:3977: $? = 1
-configure: failed program was:
-| /* confdefs.h.  */
-| 
-| #define PACKAGE_NAME "AdvanceCOMP"
-| #define PACKAGE_TARNAME "advancecomp"
-| #define PACKAGE_VERSION "1.9"
-| #define PACKAGE_STRING "AdvanceCOMP 1.9"
-| #define PACKAGE_BUGREPORT ""
-| #define PACKAGE "advancecomp"
-| #define VERSION "1.9"
-| #ifdef __cplusplus
-| extern "C" void std::exit (int) throw (); using std::exit;
-| #endif
-| #define HAVE_LIBZ 1
-| #define STDC_HEADERS 1
-| #define HAVE_SYS_TYPES_H 1
-| #define HAVE_SYS_STAT_H 1
-| #define HAVE_STDLIB_H 1
-| #define HAVE_STRING_H 1
-| #define HAVE_MEMORY_H 1
-| #define HAVE_STRINGS_H 1
-| #define HAVE_INTTYPES_H 1
-| #define HAVE_STDINT_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UNISTD_H 1
-| #define HAVE_UTIME_H 1
-| #define HAVE_STDARG_H 1
-| /* end confdefs.h.  */
-| #include <varargs.h>
-configure:3997: result: no
-configure:4032: checking for varargs.h
-configure:4039: result: no
-configure:3917: checking getopt.h usability
-configure:3929: gcc -c -g -O2  conftest.c >&5
-configure:3935: $? = 0
-configure:3938: test -z 			 || test ! -s conftest.err
-configure:3941: $? = 0
-configure:3944: test -s conftest.o
-configure:3947: $? = 0
-configure:3957: result: yes
-configure:3961: checking getopt.h presence
-configure:3971: gcc -E  conftest.c
-configure:3977: $? = 0
-configure:3997: result: yes
-configure:4032: checking for getopt.h
-configure:4039: result: yes
-configure:4054: checking for an ANSI C-conforming const
-configure:4121: gcc -c -g -O2  conftest.c >&5
-configure:4127: $? = 0
-configure:4130: test -z 			 || test ! -s conftest.err
-configure:4133: $? = 0
-configure:4136: test -s conftest.o
-configure:4139: $? = 0
-configure:4150: result: yes
-configure:4160: checking for inline
-configure:4181: gcc -c -g -O2  conftest.c >&5
-configure:4187: $? = 0
-configure:4190: test -z 			 || test ! -s conftest.err
-configure:4193: $? = 0
-configure:4196: test -s conftest.o
-configure:4199: $? = 0
-configure:4211: result: inline
-configure:4239: checking for getopt
-configure:4296: gcc -o conftest -g -O2   conftest.c -lz  >&5
-configure:4302: $? = 0
-configure:4305: test -z 			 || test ! -s conftest.err
-configure:4308: $? = 0
-configure:4311: test -s conftest
-configure:4314: $? = 0
-configure:4326: result: yes
-configure:4239: checking for getopt_long
-configure:4296: gcc -o conftest -g -O2   conftest.c -lz  >&5
-configure:4302: $? = 0
-configure:4305: test -z 			 || test ! -s conftest.err
-configure:4308: $? = 0
-configure:4311: test -s conftest
-configure:4314: $? = 0
-configure:4326: result: yes
-configure:4239: checking for snprintf
-configure:4296: gcc -o conftest -g -O2   conftest.c -lz  >&5
-conftest.c:55: warning: conflicting types for built-in function `snprintf'
-configure:4302: $? = 0
-configure:4305: test -z 			 || test ! -s conftest.err
-configure:4308: $? = 0
-configure:4311: test -s conftest
-configure:4314: $? = 0
-configure:4326: result: yes
-configure:4239: checking for vsnprintf
-configure:4296: gcc -o conftest -g -O2   conftest.c -lz  >&5
-conftest.c:56: warning: conflicting types for built-in function `vsnprintf'
-configure:4302: $? = 0
-configure:4305: test -z 			 || test ! -s conftest.err
-configure:4308: $? = 0
-configure:4311: test -s conftest
-configure:4314: $? = 0
-configure:4326: result: yes
-configure:4533: creating ./config.status
-
-## ---------------------- ##
-## Running config.status. ##
-## ---------------------- ##
-
-This file was extended by AdvanceCOMP config.status 1.9, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = 
-  CONFIG_HEADERS  = 
-  CONFIG_LINKS    = 
-  CONFIG_COMMANDS = 
-  $ ./config.status 
-
-on Koffer
-
-config.status:719: creating Makefile
-config.status:785: creating config.h
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_build=i686-pc-linux-gnu
-ac_cv_build_alias=i686-pc-linux-gnu
-ac_cv_c_compiler_gnu=yes
-ac_cv_c_const=yes
-ac_cv_c_inline=inline
-ac_cv_cxx_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_CXXFLAGS_set=
-ac_cv_env_CXXFLAGS_value=
-ac_cv_env_CXX_set=
-ac_cv_env_CXX_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_exeext=
-ac_cv_func_getopt=yes
-ac_cv_func_getopt_long=yes
-ac_cv_func_snprintf=yes
-ac_cv_func_vsnprintf=yes
-ac_cv_header_getopt_h=yes
-ac_cv_header_inttypes_h=yes
-ac_cv_header_memory_h=yes
-ac_cv_header_stdarg_h=yes
-ac_cv_header_stdc=yes
-ac_cv_header_stdint_h=yes
-ac_cv_header_stdlib_h=yes
-ac_cv_header_string_h=yes
-ac_cv_header_strings_h=yes
-ac_cv_header_sys_stat_h=yes
-ac_cv_header_sys_types_h=yes
-ac_cv_header_sys_utime_h=no
-ac_cv_header_unistd_h=yes
-ac_cv_header_utime_h=yes
-ac_cv_header_varargs_h=no
-ac_cv_host=i686-pc-linux-gnu
-ac_cv_host_alias=i686-pc-linux-gnu
-ac_cv_lib_z_adler32=yes
-ac_cv_objext=o
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_AWK=gawk
-ac_cv_prog_COL=col
-ac_cv_prog_CPP='gcc -E'
-ac_cv_prog_GROFF=groff
-ac_cv_prog_GZIP=gzip
-ac_cv_prog_TAR=tar
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_ac_ct_CXX=g++
-ac_cv_prog_cc_g=yes
-ac_cv_prog_cc_stdc=
-ac_cv_prog_cxx_g=yes
-ac_cv_prog_egrep='grep -E'
-ac_cv_prog_make_make_set=yes
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-ACLOCAL='${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run aclocal-1.7'
-AMTAR='${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run tar'
-AUTOCONF='${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run autoconf'
-AUTOHEADER='${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run autoheader'
-AUTOMAKE='${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run automake-1.7'
-AWK='gawk'
-CC='gcc'
-CFLAGS='-g -O2 -DUSE_ERROR_SILENT -DUSE_COMPRESS'
-COL='col'
-CPP='gcc -E'
-CPPFLAGS=''
-CXX='g++'
-CXXFLAGS='-g -O2 -DUSE_ERROR_SILENT -DUSE_COMPRESS'
-CYGPATH_W='echo'
-DEFS='-DHAVE_CONFIG_H'
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP='grep -E'
-EXEEXT=''
-GROFF='groff'
-GZIP='gzip'
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
-LDFLAGS=''
-LIBOBJS=''
-LIBS='-lz '
-LTLIBOBJS=''
-MAKEINFO='${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run makeinfo'
-OBJEXT='o'
-PACKAGE='advancecomp'
-PACKAGE_BUGREPORT=''
-PACKAGE_NAME='AdvanceCOMP'
-PACKAGE_STRING='AdvanceCOMP 1.9'
-PACKAGE_TARNAME='advancecomp'
-PACKAGE_VERSION='1.9'
-PATH_SEPARATOR=':'
-SET_MAKE=''
-SHELL='/bin/sh'
-STRIP=''
-TAR='tar'
-VERSION='1.9'
-ac_ct_CC='gcc'
-ac_ct_CXX='g++'
-ac_ct_STRIP=''
-am__leading_dot='.'
-bindir='${exec_prefix}/bin'
-build='i686-pc-linux-gnu'
-build_alias=''
-build_cpu='i686'
-build_os='linux-gnu'
-build_vendor='pc'
-datadir='${prefix}/share'
-exec_prefix='${prefix}'
-host='i686-pc-linux-gnu'
-host_alias=''
-host_cpu='i686'
-host_os='linux-gnu'
-host_vendor='pc'
-includedir='${prefix}/include'
-infodir='${prefix}/info'
-install_sh='/home/knopper/advancecomp-1.9_create_compressed_fs/install-sh'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localstatedir='${prefix}/var'
-mandir='${prefix}/man'
-oldincludedir='/usr/include'
-prefix='/usr/local'
-program_transform_name='s,x,x,'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target_alias=''
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define HAVE_GETOPT 1
-#define HAVE_GETOPT_H 1
-#define HAVE_GETOPT_LONG 1
-#define HAVE_INTTYPES_H 1
-#define HAVE_LIBZ 1
-#define HAVE_MEMORY_H 1
-#define HAVE_SNPRINTF 1
-#define HAVE_STDARG_H 1
-#define HAVE_STDINT_H 1
-#define HAVE_STDLIB_H 1
-#define HAVE_STRINGS_H 1
-#define HAVE_STRING_H 1
-#define HAVE_SYS_STAT_H 1
-#define HAVE_SYS_TYPES_H 1
-#define HAVE_UNISTD_H 1
-#define HAVE_UNISTD_H 1
-#define HAVE_UTIME_H 1
-#define HAVE_VSNPRINTF 1
-#define PACKAGE "advancecomp"
-#define PACKAGE_BUGREPORT ""
-#define PACKAGE_NAME "AdvanceCOMP"
-#define PACKAGE_STRING "AdvanceCOMP 1.9"
-#define PACKAGE_TARNAME "advancecomp"
-#define PACKAGE_VERSION "1.9"
-#define STDC_HEADERS 1
-#define USE_7Z 1
-#define USE_LZMA 1
-#define VERSION "1.9"
-#endif
-#ifdef __cplusplus
-extern "C" void std::exit (int) throw (); using std::exit;
-
-configure: exit 0

Deleted: trunk/cloop/advancecomp-1.9_create_compressed_fs/config.status
===================================================================
--- trunk/cloop/advancecomp-1.9_create_compressed_fs/config.status	2007-06-01 12:05:51 UTC (rev 2514)
+++ trunk/cloop/advancecomp-1.9_create_compressed_fs/config.status	2007-06-01 12:15:23 UTC (rev 2515)
@@ -1,982 +0,0 @@
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# Support unset when possible.
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  test -d ./-p && rmdir ./-p
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by AdvanceCOMP $as_me 1.9, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile"
-config_headers=" config.h"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-		   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-		   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Report bugs to <bug-autoconf-mXXj517/[email protected]>."
-ac_cs_version="\
-AdvanceCOMP config.status 1.9
-configured by ./configure, generated by GNU Autoconf 2.59,
-  with options \"\"
-
-Copyright (C) 2003 Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c"
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
-  echo "running /bin/sh ./configure "  $ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec /bin/sh ./configure  $ac_configure_extra_args --no-create --no-recursion
-fi
-
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s,@SHELL@,/bin/sh,;t t
-s,@PATH_SEPARATOR@,:,;t t
-s,@PACKAGE_NAME@,AdvanceCOMP,;t t
-s,@PACKAGE_TARNAME@,advancecomp,;t t
-s,@PACKAGE_VERSION@,1.9,;t t
-s,@PACKAGE_STRING@,AdvanceCOMP 1.9,;t t
-s,@PACKAGE_BUGREPORT@,,;t t
-s,@exec_prefix@,${prefix},;t t
-s,@prefix@,/usr/local,;t t
-s,@program_transform_name@,s,x,x,,;t t
-s,@bindir@,${exec_prefix}/bin,;t t
-s,@sbindir@,${exec_prefix}/sbin,;t t
-s,@libexecdir@,${exec_prefix}/libexec,;t t
-s,@datadir@,${prefix}/share,;t t
-s,@sysconfdir@,${prefix}/etc,;t t
-s,@sharedstatedir@,${prefix}/com,;t t
-s,@localstatedir@,${prefix}/var,;t t
-s,@libdir@,${exec_prefix}/lib,;t t
-s,@includedir@,${prefix}/include,;t t
-s,@oldincludedir@,/usr/include,;t t
-s,@infodir@,${prefix}/info,;t t
-s,@mandir@,${prefix}/man,;t t
-s,@build_alias@,,;t t
-s,@host_alias@,,;t t
-s,@target_alias@,,;t t
-s,@DEFS@,-DHAVE_CONFIG_H,;t t
-s,@ECHO_C@,,;t t
-s,@ECHO_N@,-n,;t t
-s,@ECHO_T@,,;t t
-s,@LIBS@,-lz ,;t t
-s,@INSTALL_PROGRAM@,${INSTALL},;t t
-s,@INSTALL_SCRIPT@,${INSTALL},;t t
-s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
-s,@CYGPATH_W@,echo,;t t
-s,@PACKAGE@,advancecomp,;t t
-s,@VERSION@,1.9,;t t
-s,@ACLOCAL@,${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run aclocal-1.7,;t t
-s,@AUTOCONF@,${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run autoconf,;t t
-s,@AUTOMAKE@,${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run automake-1.7,;t t
-s,@AUTOHEADER@,${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run autoheader,;t t
-s,@MAKEINFO@,${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run makeinfo,;t t
-s,@AMTAR@,${SHELL} /home/knopper/advancecomp-1.9_create_compressed_fs/missing --run tar,;t t
-s,@install_sh@,/home/knopper/advancecomp-1.9_create_compressed_fs/install-sh,;t t
-s,@STRIP@,,;t t
-s,@ac_ct_STRIP@,,;t t
-s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
-s,@AWK@,gawk,;t t
-s,@SET_MAKE@,,;t t
-s,@am__leading_dot@,.,;t t
-s,@build@,i686-pc-linux-gnu,;t t
-s,@build_cpu@,i686,;t t
-s,@build_vendor@,pc,;t t
-s,@build_os@,linux-gnu,;t t
-s,@host@,i686-pc-linux-gnu,;t t
-s,@host_cpu@,i686,;t t
-s,@host_vendor@,pc,;t t
-s,@host_os@,linux-gnu,;t t
-s,@CXX@,g++,;t t
-s,@CXXFLAGS@,-g -O2 -DUSE_ERROR_SILENT -DUSE_COMPRESS,;t t
-s,@LDFLAGS@,,;t t
-s,@CPPFLAGS@,,;t t
-s,@ac_ct_CXX@,g++,;t t
-s,@EXEEXT@,,;t t
-s,@OBJEXT@,o,;t t
-s,@CC@,gcc,;t t
-s,@CFLAGS@,-g -O2 -DUSE_ERROR_SILENT -DUSE_COMPRESS,;t t
-s,@ac_ct_CC@,gcc,;t t
-s,@TAR@,tar,;t t
-s,@GZIP@,gzip,;t t
-s,@GROFF@,groff,;t t
-s,@COL@,col,;t t
-s,@CPP@,gcc -E,;t t
-s,@EGREP@,grep -E,;t t
-s,@LIBOBJS@,,;t t
-s,@LTLIBOBJS@,,;t t
-CEOF
-
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  sed "/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
-  # Handle all the #define templates only if necessary.
-  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then
-  # If there are no defines, we may have an empty if/fi
-  :
-  cat >$tmp/defines.sed <<CEOF
-/^[	 ]*#[	 ]*define/!b
-t clr
-: clr
-${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}"AdvanceCOMP"${ac_dD}
-${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}"advancecomp"${ac_dD}
-${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}"1.9"${ac_dD}
-${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}"AdvanceCOMP 1.9"${ac_dD}
-${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}""${ac_dD}
-${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"advancecomp"${ac_dD}
-${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"1.9"${ac_dD}
-${ac_dA}HAVE_LIBZ${ac_dB}HAVE_LIBZ${ac_dC}1${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MEMORY_H${ac_dB}HAVE_MEMORY_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRINGS_H${ac_dB}HAVE_STRINGS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UTIME_H${ac_dB}HAVE_UTIME_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDARG_H${ac_dB}HAVE_STDARG_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETOPT_H${ac_dB}HAVE_GETOPT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETOPT${ac_dB}HAVE_GETOPT${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETOPT_LONG${ac_dB}HAVE_GETOPT_LONG${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SNPRINTF${ac_dB}HAVE_SNPRINTF${ac_dC}1${ac_dD}
-${ac_dA}HAVE_VSNPRINTF${ac_dB}HAVE_VSNPRINTF${ac_dC}1${ac_dD}
-${ac_dA}USE_7Z${ac_dB}USE_7Z${ac_dC}1${ac_dD}
-${ac_dA}USE_LZMA${ac_dB}USE_LZMA${ac_dC}1${ac_dD}
-CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  fi # grep
-
-  # Handle all the #undef templates
-  cat >$tmp/undefs.sed <<CEOF
-/^[	 ]*#[	 ]*undef/!b
-t clr
-: clr
-${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}"AdvanceCOMP"${ac_uD}
-${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}"advancecomp"${ac_uD}
-${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}"1.9"${ac_uD}
-${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}"AdvanceCOMP 1.9"${ac_uD}
-${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}""${ac_uD}
-${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"advancecomp"${ac_uD}
-${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"1.9"${ac_uD}
-${ac_uA}HAVE_LIBZ${ac_uB}HAVE_LIBZ${ac_uC}1${ac_uD}
-${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRING_H${ac_uB}HAVE_STRING_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_MEMORY_H${ac_uB}HAVE_MEMORY_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRINGS_H${ac_uB}HAVE_STRINGS_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_INTTYPES_H${ac_uB}HAVE_INTTYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDINT_H${ac_uB}HAVE_STDINT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_UNISTD_H${ac_uB}HAVE_UNISTD_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_UTIME_H${ac_uB}HAVE_UTIME_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDARG_H${ac_uB}HAVE_STDARG_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_GETOPT_H${ac_uB}HAVE_GETOPT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_GETOPT${ac_uB}HAVE_GETOPT${ac_uC}1${ac_uD}
-${ac_uA}HAVE_GETOPT_LONG${ac_uB}HAVE_GETOPT_LONG${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SNPRINTF${ac_uB}HAVE_SNPRINTF${ac_uC}1${ac_uD}
-${ac_uA}HAVE_VSNPRINTF${ac_uB}HAVE_VSNPRINTF${ac_uC}1${ac_uD}
-${ac_uA}USE_7Z${ac_uB}USE_7Z${ac_uC}1${ac_uD}
-${ac_uA}USE_LZMA${ac_uB}USE_LZMA${ac_uC}1${ac_uD}
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
-  if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
-      { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
-echo "$as_me: $ac_file is unchanged" >&6;}
-    else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-      rm -f $ac_file
-      mv $tmp/config.h $ac_file
-    fi
-  else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
-  fi
-# Compute $ac_file's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $ac_file | $ac_file:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
-$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X$ac_file : 'X\(//\)[^/]' \| \
-	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X$ac_file |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-
-{ (exit 0); exit 0; }

Deleted: trunk/clusterix/openmosix-tools-0.3.6-2/config.log
===================================================================
--- trunk/clusterix/openmosix-tools-0.3.6-2/config.log	2007-06-01 12:05:51 UTC (rev 2514)
+++ trunk/clusterix/openmosix-tools-0.3.6-2/config.log	2007-06-01 12:15:23 UTC (rev 2515)
@@ -1,263 +0,0 @@
-This file contains any messages produced by compilers while
-running configure, to aid debugging if configure makes a mistake.
-
-It was created by openmosix-tools configure 0.3.6-2, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
-
-  $ ./configure --with-mosrundir=/clusterix/g1powermac/userlandtools/openmosix-tools-0.3.6-2/debian/openmosix/bin --prefix=/usr --with-configdir=/clusterix/g1powermac/userlandtools/openmosix-tools-0.3.6-2/debian/openmosix/etc/default --with-sysvdir=/clusterix/g1powermac/userlandtools/openmosix-tools-0.3.6-2/debian/openmosix/etc/init.d --with-mapdir=/clusterix/g1powermac/userlandtools/openmosix-tools-0.3.6-2/debian/openmosix/etc
-
-## --------- ##
-## Platform. ##
-## --------- ##
-
-hostname = node1
-uname -m = i686
-uname -r = 2.4.27-om
-uname -s = Linux
-uname -v = #1 SMP Tue Dec 28 16:04:09 EST 2004
-
-/usr/bin/uname -p = unknown
-/bin/uname -X     = unknown
-
-/bin/arch              = i686
-/usr/bin/arch -k       = unknown
-/usr/convex/getsysinfo = unknown
-hostinfo               = unknown
-/bin/machine           = unknown
-/usr/bin/oslevel       = unknown
-/bin/universe          = unknown
-
-PATH: /sbin
-PATH: /bin
-PATH: /usr/sbin
-PATH: /usr/bin
-PATH: /usr/bin/X11
-PATH: /usr/local/sbin
-PATH: /usr/local/bin
-
-
-## ----------- ##
-## Core tests. ##
-## ----------- ##
-
-configure:1533: checking for a BSD-compatible install
-configure:1587: result: /usr/bin/install -c
-configure:1598: checking whether build environment is sane
-configure:1641: result: yes
-configure:1666: WARNING: `missing' script is too old or missing
-configure:1674: checking for gawk
-configure:1703: result: no
-configure:1674: checking for mawk
-configure:1690: found /usr/bin/mawk
-configure:1700: result: mawk
-configure:1710: checking whether make sets $(MAKE)
-configure:1730: result: yes
-configure:1941: checking for gcc
-configure:1957: found /usr/bin/gcc
-configure:1967: result: gcc
-configure:2211: checking for C compiler version
-configure:2214: gcc --version </dev/null >&5
-gcc (GCC) 3.3.5 (Debian 1:3.3.5-5)
-Copyright (C) 2003 Free Software Foundation, Inc.
-This is free software; see the source for copying conditions.  There is NO
-warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-
-configure:2217: $? = 0
-configure:2219: gcc -v </dev/null >&5
-Reading specs from /usr/lib/gcc-lib/i486-linux/3.3.5/specs
-Configured with: ../src/configure -v --enable-languages=c,c++,java,f77,pascal,objc,ada,treelang --prefix=/usr --mandir=/usr/share/man --infodir=/usr/share/info --with-gxx-include-dir=/usr/include/c++/3.3 --enable-shared --with-system-zlib --enable-nls --without-included-gettext --enable-__cxa_atexit --enable-clocale=gnu --enable-debug --enable-java-gc=boehm --enable-java-awt=xlib --enable-objc-gc i486-linux
-Thread model: posix
-gcc version 3.3.5 (Debian 1:3.3.5-5)
-configure:2222: $? = 0
-configure:2224: gcc -V </dev/null >&5
-gcc: `-V' option must have argument
-configure:2227: $? = 1
-configure:2251: checking for C compiler default output
-configure:2254: gcc    conftest.c  >&5
-configure:2257: $? = 0
-configure:2303: result: a.out
-configure:2308: checking whether the C compiler works
-configure:2314: ./a.out
-configure:2317: $? = 0
-configure:2334: result: yes
-configure:2341: checking whether we are cross compiling
-configure:2343: result: no
-configure:2346: checking for suffix of executables
-configure:2348: gcc -o conftest    conftest.c  >&5
-configure:2351: $? = 0
-configure:2376: result: 
-configure:2382: checking for suffix of object files
-configure:2404: gcc -c   conftest.c >&5
-configure:2407: $? = 0
-configure:2429: result: o
-configure:2433: checking whether we are using the GNU C compiler
-configure:2458: gcc -c   conftest.c >&5
-configure:2461: $? = 0
-configure:2464: test -s conftest.o
-configure:2467: $? = 0
-configure:2480: result: yes
-configure:2486: checking whether gcc accepts -g
-configure:2508: gcc -c -g  conftest.c >&5
-
-## ---------------- ##
-## Cache variables. ##
-## ---------------- ##
-
-ac_cv_c_compiler_gnu=yes
-ac_cv_env_CC_set=
-ac_cv_env_CC_value=
-ac_cv_env_CFLAGS_set=
-ac_cv_env_CFLAGS_value=
-ac_cv_env_CPPFLAGS_set=
-ac_cv_env_CPPFLAGS_value=
-ac_cv_env_CPP_set=
-ac_cv_env_CPP_value=
-ac_cv_env_CXXCPP_set=
-ac_cv_env_CXXCPP_value=
-ac_cv_env_CXXFLAGS_set=
-ac_cv_env_CXXFLAGS_value=
-ac_cv_env_CXX_set=
-ac_cv_env_CXX_value=
-ac_cv_env_F77_set=
-ac_cv_env_F77_value=
-ac_cv_env_FFLAGS_set=
-ac_cv_env_FFLAGS_value=
-ac_cv_env_LDFLAGS_set=
-ac_cv_env_LDFLAGS_value=
-ac_cv_env_build_alias_set=
-ac_cv_env_build_alias_value=
-ac_cv_env_host_alias_set=
-ac_cv_env_host_alias_value=
-ac_cv_env_target_alias_set=
-ac_cv_env_target_alias_value=
-ac_cv_exeext=
-ac_cv_objext=o
-ac_cv_path_install='/usr/bin/install -c'
-ac_cv_prog_AWK=mawk
-ac_cv_prog_ac_ct_CC=gcc
-ac_cv_prog_make_make_set=yes
-
-## ----------------- ##
-## Output variables. ##
-## ----------------- ##
-
-ACLOCAL='aclocal-1.7'
-AMDEPBACKSLASH=''
-AMDEP_FALSE=''
-AMDEP_TRUE=''
-AMTAR='tar'
-AR=''
-AUTOCONF='autoconf'
-AUTOHEADER='autoheader'
-AUTOMAKE='automake-1.7'
-AWK='mawk'
-CC='gcc'
-CCDEPMODE=''
-CFLAGS='-g'
-CPP=''
-CPPFLAGS=''
-CXX=''
-CXXCPP=''
-CXXDEPMODE=''
-CXXFLAGS=''
-CYGPATH_W='echo'
-DEFS=''
-DEPDIR=''
-ECHO='echo'
-ECHO_C=''
-ECHO_N='-n'
-ECHO_T=''
-EGREP=''
-EXEEXT=''
-F77=''
-FFLAGS=''
-INSTALL_DATA='${INSTALL} -m 644'
-INSTALL_PROGRAM='${INSTALL}'
-INSTALL_SCRIPT='${INSTALL}'
-INSTALL_STRIP_PROGRAM='${SHELL} $(install_sh) -c -s'
-LDFLAGS=''
-LIBOBJS=''
-LIBPROC_LIBVERSION=''
-LIBPROC_MINORVERSION=''
-LIBPROC_SUBVERSION=''
-LIBPROC_VERSION=''
-LIBS=''
-LIBTOOL=''
-LN_S=''
-LTLIBOBJS=''
-MAKEINFO='makeinfo'
-MOSLIB_LIBVERSION=''
-NCURSES_LIBS=''
-OBJEXT='o'
-OM_VARLOCK_DIR=''
-PACKAGE='openmosix-tools'
-PACKAGE_BUGREPORT='openmosix-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org'
-PACKAGE_NAME='openmosix-tools'
-PACKAGE_STRING='openmosix-tools 0.3.6-2'
-PACKAGE_TARNAME='openmosix-tools'
-PACKAGE_VERSION='0.3.6-2'
-PATH_SEPARATOR=':'
-RANLIB=''
-SET_MAKE=''
-SHELL='/bin/sh'
-STRIP=''
-VERSION='0.3.6-2'
-ac_ct_AR=''
-ac_ct_CC='gcc'
-ac_ct_CXX=''
-ac_ct_F77=''
-ac_ct_RANLIB=''
-ac_ct_STRIP=''
-am__fastdepCC_FALSE=''
-am__fastdepCC_TRUE=''
-am__fastdepCXX_FALSE=''
-am__fastdepCXX_TRUE=''
-am__include=''
-am__leading_dot='.'
-am__quote=''
-bindir='${exec_prefix}/bin'
-build=''
-build_alias=''
-build_cpu=''
-build_os=''
-build_vendor=''
-datadir='${prefix}/share'
-exec_prefix='NONE'
-host=''
-host_alias=''
-host_cpu=''
-host_os=''
-host_vendor=''
-includedir='${prefix}/include'
-infodir='${prefix}/info'
-install_sh='/clusterix/g1powermac/userlandtools/openmosix-tools-0.3.6-2/install-sh'
-libdir='${exec_prefix}/lib'
-libexecdir='${exec_prefix}/libexec'
-localstatedir='${prefix}/var'
-mandir='${prefix}/man'
-mosrundir=''
-oldincludedir='/usr/include'
-omcfg=''
-ommap=''
-omsysv=''
-prefix='/usr'
-program_transform_name='s,x,x,'
-sbindir='${exec_prefix}/sbin'
-sharedstatedir='${prefix}/com'
-sysconfdir='${prefix}/etc'
-target_alias=''
-
-## ----------- ##
-## confdefs.h. ##
-## ----------- ##
-
-#define PACKAGE "openmosix-tools"
-#define PACKAGE_BUGREPORT "openmosix-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org"
-#define PACKAGE_NAME "openmosix-tools"
-#define PACKAGE_STRING "openmosix-tools 0.3.6-2"
-#define PACKAGE_TARNAME "openmosix-tools"
-#define PACKAGE_VERSION "0.3.6-2"
-#define VERSION "0.3.6-2"
-
-configure: caught signal 2
-configure: exit 1

Deleted: trunk/clusterix/openmosix-tools-0.3.6-2/config.status
===================================================================
--- trunk/clusterix/openmosix-tools-0.3.6-2/config.status	2007-06-01 12:05:51 UTC (rev 2514)
+++ trunk/clusterix/openmosix-tools-0.3.6-2/config.status	2007-06-01 12:15:23 UTC (rev 2515)
@@ -1,1295 +0,0 @@
-#! /bin/sh
-# Generated by configure.
-# Run this file to recreate the current configuration.
-# Compiler output produced by configure, useful for debugging
-# configure, is in config.log if it exists.
-
-debug=false
-ac_cs_recheck=false
-ac_cs_silent=false
-SHELL=${CONFIG_SHELL-/bin/sh}
-## --------------------- ##
-## M4sh Initialization.  ##
-## --------------------- ##
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
-fi
-
-# Support unset when possible.
-if (FOO=FOO; unset FOO) >/dev/null 2>&1; then
-  as_unset=unset
-else
-  as_unset=false
-fi
-
-
-# Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
-PS1='$ '
-PS2='> '
-PS4='+ '
-
-# NLS nuisances.
-for as_var in \
-  LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
-  LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
-  LC_TELEPHONE LC_TIME
-do
-  if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then
-    eval $as_var=C; export $as_var
-  else
-    $as_unset $as_var
-  fi
-done
-
-# Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
-  as_basename=basename
-else
-  as_basename=false
-fi
-
-
-# Name of the executable.
-as_me=`$as_basename "$0" ||
-$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
-	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
-
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
-
-
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
-
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
-
-  # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
-  # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
-  # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
-    sed '
-      N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
-      t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
-    ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
-   { (exit 1); exit 1; }; }
-
-  # Don't try to exec as it changes $[0], causing all sort of problems
-  # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
-  # Exit status is that of the last command.
-  exit
-}
-
-
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
-esac
-
-if expr a : '\(a\)' >/dev/null 2>&1; then
-  as_expr=expr
-else
-  as_expr=false
-fi
-
-rm -f conf$$ conf$$.exe conf$$.file
-echo >conf$$.file
-if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
-    as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
-elif ln conf$$.file conf$$ 2>/dev/null; then
-  as_ln_s=ln
-else
-  as_ln_s='cp -p'
-fi
-rm -f conf$$ conf$$.exe conf$$.file
-
-if mkdir -p . 2>/dev/null; then
-  as_mkdir_p=:
-else
-  as_mkdir_p=false
-fi
-
-as_executable_p="test -f"
-
-# Sed expression to map a string onto a valid CPP name.
-as_tr_cpp="sed y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g"
-
-# Sed expression to map a string onto a valid variable name.
-as_tr_sh="sed y%*+%pp%;s%[^_$as_cr_alnum]%_%g"
-
-
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
-exec 6>&1
-
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
-# report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
-This file was extended by openmosix-tools $as_me 0.3.6-2, which was
-generated by GNU Autoconf 2.57.  Invocation command line was
-
-  CONFIG_FILES    = $CONFIG_FILES
-  CONFIG_HEADERS  = $CONFIG_HEADERS
-  CONFIG_LINKS    = $CONFIG_LINKS
-  CONFIG_COMMANDS = $CONFIG_COMMANDS
-  $ $0 $@
-
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
-config_files=" Makefile autodiscovery/Makefile fixvfork/Makefile migrate/Makefile mosmon/Makefile mosctl/Makefile moslib/Makefile moslimit/Makefile mosrun/Makefile mps/Makefile mps/proc/Makefile setpe/Makefile scripts/Makefile scripts/openmosix"
-config_headers=" config.h"
-config_commands=" depfiles"
-
-ac_cs_usage="\
-\`$as_me' instantiates files from templates according to the
-current configuration.
-
-Usage: $0 [OPTIONS] [FILE]...
-
-  -h, --help       print this help, then exit
-  -V, --version    print version number, then exit
-  -q, --quiet      do not print progress messages
-  -d, --debug      don't remove temporary files
-      --recheck    update $as_me by reconfiguring in the same conditions
-  --file=FILE[:TEMPLATE]
-                   instantiate the configuration file FILE
-  --header=FILE[:TEMPLATE]
-                   instantiate the configuration header FILE
-
-Configuration files:
-$config_files
-
-Configuration headers:
-$config_headers
-
-Configuration commands:
-$config_commands
-
-Report bugs to <bug-autoconf-mXXj517/[email protected]>."
-ac_cs_version="\
-openmosix-tools config.status 0.3.6-2
-configured by ./configure, generated by GNU Autoconf 2.57,
-  with options \"'--with-mosrundir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/bin' '--prefix=/usr' '--with-configdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/default' '--with-sysvdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/init.d' '--with-mapdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc'\"
-
-Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001
-Free Software Foundation, Inc.
-This config.status script is free software; the Free Software Foundation
-gives unlimited permission to copy, distribute and modify it."
-srcdir=.
-INSTALL="/usr/bin/install -c"
-# If no file are specified by the user, then we need to provide default
-# value.  By we need to know if files were specified by the user.
-ac_need_defaults=:
-while test $# != 0
-do
-  case $1 in
-  --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
-    ac_shift=:
-    ;;
-  -*)
-    ac_option=$1
-    ac_optarg=$2
-    ac_shift=shift
-    ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
-  esac
-
-  case $ac_option in
-  # Handling of the options.
-  -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
-    ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
-    debug=: ;;
-  --file | --fil | --fi | --f )
-    $ac_shift
-    CONFIG_FILES="$CONFIG_FILES $ac_optarg"
-    ac_need_defaults=false;;
-  --header | --heade | --head | --hea )
-    $ac_shift
-    CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
-    ac_need_defaults=false;;
-  -q | -quiet | --quiet | --quie | --qui | --qu | --q \
-  | -silent | --silent | --silen | --sile | --sil | --si | --s)
-    ac_cs_silent=: ;;
-
-  # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; } ;;
-
-  *) ac_config_targets="$ac_config_targets $1" ;;
-
-  esac
-  shift
-done
-
-ac_configure_extra_args=
-
-if $ac_cs_silent; then
-  exec 6>/dev/null
-  ac_configure_extra_args="$ac_configure_extra_args --silent"
-fi
-
-if $ac_cs_recheck; then
-  echo "running /bin/sh ./configure " '--with-mosrundir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/bin' '--prefix=/usr' '--with-configdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/default' '--with-sysvdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/init.d' '--with-mapdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc' $ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec /bin/sh ./configure '--with-mosrundir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/bin' '--prefix=/usr' '--with-configdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/default' '--with-sysvdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/init.d' '--with-mapdir=/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc' $ac_configure_extra_args --no-create --no-recursion
-fi
-
-#
-# INIT-COMMANDS section.
-#
-
-AMDEP_TRUE="" ac_aux_dir="."
-
-for ac_config_target in $ac_config_targets
-do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "autodiscovery/Makefile" ) CONFIG_FILES="$CONFIG_FILES autodiscovery/Makefile" ;;
-  "fixvfork/Makefile" ) CONFIG_FILES="$CONFIG_FILES fixvfork/Makefile" ;;
-  "migrate/Makefile" ) CONFIG_FILES="$CONFIG_FILES migrate/Makefile" ;;
-  "mosmon/Makefile" ) CONFIG_FILES="$CONFIG_FILES mosmon/Makefile" ;;
-  "mosctl/Makefile" ) CONFIG_FILES="$CONFIG_FILES mosctl/Makefile" ;;
-  "moslib/Makefile" ) CONFIG_FILES="$CONFIG_FILES moslib/Makefile" ;;
-  "moslimit/Makefile" ) CONFIG_FILES="$CONFIG_FILES moslimit/Makefile" ;;
-  "mosrun/Makefile" ) CONFIG_FILES="$CONFIG_FILES mosrun/Makefile" ;;
-  "mps/Makefile" ) CONFIG_FILES="$CONFIG_FILES mps/Makefile" ;;
-  "mps/proc/Makefile" ) CONFIG_FILES="$CONFIG_FILES mps/proc/Makefile" ;;
-  "setpe/Makefile" ) CONFIG_FILES="$CONFIG_FILES setpe/Makefile" ;;
-  "scripts/Makefile" ) CONFIG_FILES="$CONFIG_FILES scripts/Makefile" ;;
-  "scripts/openmosix" ) CONFIG_FILES="$CONFIG_FILES scripts/openmosix" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
-  *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
-echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# If the user did not use the arguments to specify the items to instantiate,
-# then the envvar interface is used.  Set only those that are not.
-# We use the long form for the default assignment because of an extremely
-# bizarre bug on SunOS 4.1.3.
-if $ac_need_defaults; then
-  test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
-  test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
-  test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
-fi
-
-# Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
-# creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
-$debug ||
-{
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
-  trap '{ (exit 1); exit 1; }' 1 2 13 15
-}
-
-# Create a (secure) tmp directory for tmp files.
-
-{
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
-  test -n "$tmp" && test -d "$tmp"
-}  ||
-{
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
-} ||
-{
-   echo "$me: cannot create a temporary directory in ." >&2
-   { (exit 1); exit 1; }
-}
-
-
-#
-# CONFIG_FILES section.
-#
-
-# No need to generate the scripts if there are no CONFIG_FILES.
-# This happens for instance when ./config.status config.h
-if test -n "$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t$/@;t t/; /@;t t$/s/[\\&,]/\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t$/,;t t/' >$tmp/subs.sed <<\CEOF
-s,@SHELL@,/bin/sh,;t t
-s,@PATH_SEPARATOR@,:,;t t
-s,@PACKAGE_NAME@,openmosix-tools,;t t
-s,@PACKAGE_TARNAME@,openmosix-tools,;t t
-s,@PACKAGE_VERSION@,0.3.6-2,;t t
-s,@PACKAGE_STRING@,openmosix-tools 0.3.6-2,;t t
-s,@PACKAGE_BUGREPORT@,openmosix-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,;t t
-s,@exec_prefix@,${prefix},;t t
-s,@prefix@,/usr,;t t
-s,@program_transform_name@,s,x,x,,;t t
-s,@bindir@,${exec_prefix}/bin,;t t
-s,@sbindir@,${exec_prefix}/sbin,;t t
-s,@libexecdir@,${exec_prefix}/libexec,;t t
-s,@datadir@,${prefix}/share,;t t
-s,@sysconfdir@,${prefix}/etc,;t t
-s,@sharedstatedir@,${prefix}/com,;t t
-s,@localstatedir@,${prefix}/var,;t t
-s,@libdir@,${exec_prefix}/lib,;t t
-s,@includedir@,${prefix}/include,;t t
-s,@oldincludedir@,/usr/include,;t t
-s,@infodir@,${prefix}/info,;t t
-s,@mandir@,${prefix}/man,;t t
-s,@build_alias@,,;t t
-s,@host_alias@,,;t t
-s,@target_alias@,,;t t
-s,@DEFS@,-DHAVE_CONFIG_H,;t t
-s,@ECHO_C@,,;t t
-s,@ECHO_N@,-n,;t t
-s,@ECHO_T@,,;t t
-s,@LIBS@,,;t t
-s,@INSTALL_PROGRAM@,${INSTALL},;t t
-s,@INSTALL_SCRIPT@,${INSTALL},;t t
-s,@INSTALL_DATA@,${INSTALL} -m 644,;t t
-s,@CYGPATH_W@,echo,;t t
-s,@PACKAGE@,openmosix-tools,;t t
-s,@VERSION@,0.3.6-2,;t t
-s,@ACLOCAL@,aclocal-1.7,;t t
-s,@AUTOCONF@,autoconf,;t t
-s,@AUTOMAKE@,automake-1.7,;t t
-s,@AUTOHEADER@,autoheader,;t t
-s,@MAKEINFO@,makeinfo,;t t
-s,@AMTAR@,tar,;t t
-s,@install_sh@,/clusterix/g1powermac/openmosix-tools-0.3.6-2/install-sh,;t t
-s,@STRIP@,strip,;t t
-s,@ac_ct_STRIP@,strip,;t t
-s,@INSTALL_STRIP_PROGRAM@,${SHELL} $(install_sh) -c -s,;t t
-s,@AWK@,mawk,;t t
-s,@SET_MAKE@,,;t t
-s,@am__leading_dot@,.,;t t
-s,@CC@,gcc,;t t
-s,@CFLAGS@,-g -O2 -Wall -O2 -I../moslib  -I/usr/src/linux-openmosix/include -I.,;t t
-s,@LDFLAGS@,,;t t
-s,@CPPFLAGS@,,;t t
-s,@ac_ct_CC@,gcc,;t t
-s,@EXEEXT@,,;t t
-s,@OBJEXT@,o,;t t
-s,@DEPDIR@,.deps,;t t
-s,@am__include@,include,;t t
-s,@am__quote@,,;t t
-s,@AMDEP_TRUE@,,;t t
-s,@AMDEP_FALSE@,#,;t t
-s,@AMDEPBACKSLASH@,\,;t t
-s,@CCDEPMODE@,depmode=gcc3,;t t
-s,@am__fastdepCC_TRUE@,,;t t
-s,@am__fastdepCC_FALSE@,#,;t t
-s,@LN_S@,ln -s,;t t
-s,@CPP@,gcc -E,;t t
-s,@EGREP@,grep -E,;t t
-s,@ommap@,/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc,;t t
-s,@omsysv@,/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/init.d,;t t
-s,@omcfg@,/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/etc/default,;t t
-s,@mosrundir@,/clusterix/g1powermac/openmosix-tools-0.3.6-2/debian/openmosix/bin,;t t
-s,@OM_VARLOCK_DIR@,/var/lock,;t t
-s,@build@,i686-pc-linux-gnu,;t t
-s,@build_cpu@,i686,;t t
-s,@build_vendor@,pc,;t t
-s,@build_os@,linux-gnu,;t t
-s,@host@,i686-pc-linux-gnu,;t t
-s,@host_cpu@,i686,;t t
-s,@host_vendor@,pc,;t t
-s,@host_os@,linux-gnu,;t t
-s,@ECHO@,echo,;t t
-s,@AR@,ar,;t t
-s,@ac_ct_AR@,ar,;t t
-s,@RANLIB@,ranlib,;t t
-s,@ac_ct_RANLIB@,ranlib,;t t
-s,@CXX@,g++,;t t
-s,@CXXFLAGS@,-g -O2,;t t
-s,@ac_ct_CXX@,g++,;t t
-s,@CXXDEPMODE@,depmode=gcc3,;t t
-s,@am__fastdepCXX_TRUE@,,;t t
-s,@am__fastdepCXX_FALSE@,#,;t t
-s,@CXXCPP@,g++ -E,;t t
-s,@F77@,,;t t
-s,@FFLAGS@,,;t t
-s,@ac_ct_F77@,,;t t
-s,@LIBTOOL@,$(SHELL) $(top_builddir)/libtool,;t t
-s,@NCURSES_LIBS@,-lncurses,;t t
-s,@LIBPROC_VERSION@,1,;t t
-s,@LIBPROC_SUBVERSION@,2,;t t
-s,@LIBPROC_MINORVERSION@,9,;t t
-s,@LIBPROC_LIBVERSION@,3:9:2,;t t
-s,@MOSLIB_LIBVERSION@,3:0:3,;t t
-s,@LIBOBJS@,,;t t
-s,@LTLIBOBJS@,,;t t
-CEOF
-
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-  	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-  	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
-  fi
-fi # test -n "$CONFIG_FILES"
-
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$ac_file" : 'X\(//\)[^/]' \| \
-         X"$ac_file" : 'X\(//\)$' \| \
-         X"$ac_file" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-         X"$as_dir" : 'X\(//\)[^/]' \| \
-         X"$as_dir" : 'X\(//\)$' \| \
-         X"$as_dir" : 'X\(/\)' \| \
-         .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-# Don't blindly perform a `cd "$ac_dir"/$ac_foo && pwd` since $ac_foo can be
-# absolute.
-ac_abs_builddir=`cd "$ac_dir" && cd $ac_builddir && pwd`
-ac_abs_top_builddir=`cd "$ac_dir" && cd ${ac_top_builddir}. && pwd`
-ac_abs_srcdir=`cd "$ac_dir" && cd $ac_srcdir && pwd`
-ac_abs_top_srcdir=`cd "$ac_dir" && cd $ac_top_srcdir && pwd`
-
-
-  case $INSTALL in
-  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
-  esac
-
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-                                     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  sed "/^[ 	]*VPATH[ 	]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[ 	]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[ 	]*$//;
-}
-
-:t
-/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
-
-done
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([ 	]*\)#\([ 	]*define[ 	][ 	]*\)'
-ac_dB='[ 	].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([ 	]*\)#\([ 	]*\)undef\([ 	][ 	]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-        cat >$tmp/stdin
-        ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-        ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
-  esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-         # Absolute (can't be DOS-style, as IFS=:)
-         test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         echo $f;;
-      *) # Relative
-         if test -f "$f"; then
-           # Build tree
-           echo $f
-         elif test -f "$srcdir/$f"; then
-           # Source tree
-           echo $srcdir/$f
-         else
-           # /dev/null tree
-           { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-         fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[ 	]*$//' $ac_file_inputs >$tmp/in
-
-  # Handle all the #define templates only if necessary.
-  if grep "^[ 	]*#[ 	]*define" $tmp/in >/dev/null; then
-  # If there are no defines, we may have an empty if/fi
-  :
-  cat >$tmp/defines.sed <<CEOF
-/^[ 	]*#[ 	]*define/!b
-t clr
-: clr
-${ac_dA}PACKAGE_NAME${ac_dB}PACKAGE_NAME${ac_dC}"openmosix-tools"${ac_dD}
-${ac_dA}PACKAGE_TARNAME${ac_dB}PACKAGE_TARNAME${ac_dC}"openmosix-tools"${ac_dD}
-${ac_dA}PACKAGE_VERSION${ac_dB}PACKAGE_VERSION${ac_dC}"0.3.6-2"${ac_dD}
-${ac_dA}PACKAGE_STRING${ac_dB}PACKAGE_STRING${ac_dC}"openmosix-tools 0.3.6-2"${ac_dD}
-${ac_dA}PACKAGE_BUGREPORT${ac_dB}PACKAGE_BUGREPORT${ac_dC}"openmosix-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org"${ac_dD}
-${ac_dA}PACKAGE${ac_dB}PACKAGE${ac_dC}"openmosix-tools"${ac_dD}
-${ac_dA}VERSION${ac_dB}VERSION${ac_dC}"0.3.6-2"${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_TYPES_H${ac_dB}HAVE_SYS_TYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_STAT_H${ac_dB}HAVE_SYS_STAT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MEMORY_H${ac_dB}HAVE_MEMORY_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRINGS_H${ac_dB}HAVE_STRINGS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INTTYPES_H${ac_dB}HAVE_INTTYPES_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_DLFCN_H${ac_dB}HAVE_DLFCN_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_DIRENT_H${ac_dB}HAVE_DIRENT_H${ac_dC}1${ac_dD}
-${ac_dA}STDC_HEADERS${ac_dB}STDC_HEADERS${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_WAIT_H${ac_dB}HAVE_SYS_WAIT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_ARPA_INET_H${ac_dB}HAVE_ARPA_INET_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_FCNTL_H${ac_dB}HAVE_FCNTL_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_LIMITS_H${ac_dB}HAVE_LIMITS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_NETDB_H${ac_dB}HAVE_NETDB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_NETINET_IN_H${ac_dB}HAVE_NETINET_IN_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDDEF_H${ac_dB}HAVE_STDDEF_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDINT_H${ac_dB}HAVE_STDINT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRING_H${ac_dB}HAVE_STRING_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_IOCTL_H${ac_dB}HAVE_SYS_IOCTL_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_PARAM_H${ac_dB}HAVE_SYS_PARAM_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_SOCKET_H${ac_dB}HAVE_SYS_SOCKET_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_TIME_H${ac_dB}HAVE_SYS_TIME_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYSLOG_H${ac_dB}HAVE_SYSLOG_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_TERMIO_H${ac_dB}HAVE_TERMIO_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_TERMIOS_H${ac_dB}HAVE_TERMIOS_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  cat >$tmp/defines.sed <<CEOF
-/^[ 	]*#[ 	]*define/!b
-t clr
-: clr
-${ac_dA}HAVE_UTMP_H${ac_dB}HAVE_UTMP_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRUCT_STAT_ST_RDEV${ac_dB}HAVE_STRUCT_STAT_ST_RDEV${ac_dC}1${ac_dD}
-${ac_dA}TIME_WITH_SYS_TIME${ac_dB}TIME_WITH_SYS_TIME${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_FORK${ac_dB}HAVE_FORK${ac_dC}1${ac_dD}
-${ac_dA}HAVE_VFORK${ac_dB}HAVE_VFORK${ac_dC}1${ac_dD}
-${ac_dA}HAVE_WORKING_VFORK${ac_dB}HAVE_WORKING_VFORK${ac_dC}1${ac_dD}
-${ac_dA}HAVE_WORKING_FORK${ac_dB}HAVE_WORKING_FORK${ac_dC}1${ac_dD}
-${ac_dA}LSTAT_FOLLOWS_SLASHED_SYMLINK${ac_dB}LSTAT_FOLLOWS_SLASHED_SYMLINK${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MALLOC${ac_dB}HAVE_MALLOC${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNISTD_H${ac_dB}HAVE_UNISTD_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETPAGESIZE${ac_dB}HAVE_GETPAGESIZE${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MMAP${ac_dB}HAVE_MMAP${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STDLIB_H${ac_dB}HAVE_STDLIB_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_REALLOC${ac_dB}HAVE_REALLOC${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_SELECT_H${ac_dB}HAVE_SYS_SELECT_H${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SYS_SOCKET_H${ac_dB}HAVE_SYS_SOCKET_H${ac_dC}1${ac_dD}
-${ac_dA}SELECT_TYPE_ARG1${ac_dB}SELECT_TYPE_ARG1${ac_dC}int${ac_dD}
-${ac_dA}SELECT_TYPE_ARG234${ac_dB}SELECT_TYPE_ARG234${ac_dC}(fd_set *)${ac_dD}
-${ac_dA}SELECT_TYPE_ARG5${ac_dB}SELECT_TYPE_ARG5${ac_dC}(struct timeval *)${ac_dD}
-${ac_dA}RETSIGTYPE${ac_dB}RETSIGTYPE${ac_dC}void${ac_dD}
-${ac_dA}HAVE_ALARM${ac_dB}HAVE_ALARM${ac_dC}1${ac_dD}
-${ac_dA}HAVE_FTRUNCATE${ac_dB}HAVE_FTRUNCATE${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETHOSTBYADDR${ac_dB}HAVE_GETHOSTBYADDR${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETHOSTBYNAME${ac_dB}HAVE_GETHOSTBYNAME${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETHOSTNAME${ac_dB}HAVE_GETHOSTNAME${ac_dC}1${ac_dD}
-${ac_dA}HAVE_GETTIMEOFDAY${ac_dB}HAVE_GETTIMEOFDAY${ac_dC}1${ac_dD}
-${ac_dA}HAVE_INET_NTOA${ac_dB}HAVE_INET_NTOA${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MEMSET${ac_dB}HAVE_MEMSET${ac_dC}1${ac_dD}
-${ac_dA}HAVE_MUNMAP${ac_dB}HAVE_MUNMAP${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SELECT${ac_dB}HAVE_SELECT${ac_dC}1${ac_dD}
-${ac_dA}HAVE_SOCKET${ac_dB}HAVE_SOCKET${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRCASECMP${ac_dB}HAVE_STRCASECMP${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRCHR${ac_dB}HAVE_STRCHR${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRDUP${ac_dB}HAVE_STRDUP${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRERROR${ac_dB}HAVE_STRERROR${ac_dC}1${ac_dD}
-CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  cat >$tmp/defines.sed <<CEOF
-/^[ 	]*#[ 	]*define/!b
-t clr
-: clr
-${ac_dA}HAVE_STRNCASECMP${ac_dB}HAVE_STRNCASECMP${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRPBRK${ac_dB}HAVE_STRPBRK${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRRCHR${ac_dB}HAVE_STRRCHR${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRTOL${ac_dB}HAVE_STRTOL${ac_dC}1${ac_dD}
-${ac_dA}HAVE_STRTOUL${ac_dB}HAVE_STRTOUL${ac_dC}1${ac_dD}
-${ac_dA}HAVE_UNAME${ac_dB}HAVE_UNAME${ac_dC}1${ac_dD}
-CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-
-  fi # grep
-
-  # Handle all the #undef templates
-  cat >$tmp/undefs.sed <<CEOF
-/^[ 	]*#[ 	]*undef/!b
-t clr
-: clr
-${ac_uA}PACKAGE_NAME${ac_uB}PACKAGE_NAME${ac_uC}"openmosix-tools"${ac_uD}
-${ac_uA}PACKAGE_TARNAME${ac_uB}PACKAGE_TARNAME${ac_uC}"openmosix-tools"${ac_uD}
-${ac_uA}PACKAGE_VERSION${ac_uB}PACKAGE_VERSION${ac_uC}"0.3.6-2"${ac_uD}
-${ac_uA}PACKAGE_STRING${ac_uB}PACKAGE_STRING${ac_uC}"openmosix-tools 0.3.6-2"${ac_uD}
-${ac_uA}PACKAGE_BUGREPORT${ac_uB}PACKAGE_BUGREPORT${ac_uC}"openmosix-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org"${ac_uD}
-${ac_uA}PACKAGE${ac_uB}PACKAGE${ac_uC}"openmosix-tools"${ac_uD}
-${ac_uA}VERSION${ac_uB}VERSION${ac_uC}"0.3.6-2"${ac_uD}
-${ac_uA}STDC_HEADERS${ac_uB}STDC_HEADERS${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_TYPES_H${ac_uB}HAVE_SYS_TYPES_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_SYS_STAT_H${ac_uB}HAVE_SYS_STAT_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STDLIB_H${ac_uB}HAVE_STDLIB_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_STRING_H${ac_uB}HAVE_STRING_H${ac_uC}1${ac_uD}
-${ac_uA}HAVE_MEMORY_H${ac_uB}HAVE_MEMORY_H${ac_uC}1${ac_uD}

@@ Diff output truncated at 100000 characters. @@

This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/