Re: kernel OOPS
josh <[email protected]>
| Newsgroups | gmane.linux.network.bridge.ebtables.devel |
|---|---|
| Message-ID | <[email protected]> |
On Tue, 22 Jul 2003, Nick Fedchik wrote:
> On Tuesday 22 July 2003 14:26, josh wrote:
> > Hi List,
> > I have the following setup:
> > debian (unstable)
> > kernel 2.4.21 (from kernel.org, not debain kernel)
> > ebtables-brnf_vs_2.4.21.diff
> > snort_inline-2.0.0-1.tar.gz
> >
> > When I run snort_inline in NAT mode everything works fine. When I run
> > snort_inline in bridge mode I get an OOPS error in /var/log/kern.log
> Post here Your command lines and other related config info when You get the
> crash...
Hi Nick,
I used the attached rc.firewall script for snort_inline. I believe the
relevent commands are:
brctl addbr br0
brctl addif br0 ${LAN_IFACE} #eth1
brctl addif br0 ${INET_IFACE} #eth0
iptables -A FORWARD -j QUEUE
/usr/local/bin/snort_inline -QDc /etc/snort/snort.conf
I have a third network card on the machine I use to ssh in with.
After I run these commands everything is fine until I connect the router to eth0.
After about twenty seconds I received the kernel OOPS.
What other information could be useful?
> Did You used physdev parameters?
I am sorry, can you explain what physdev parameters are?
>
>
>
Thanks for your help.
--
- Josh
94 F8 9F 3E 9A DB 6E FC F8 17 F1 B4 C7 51 CB AA ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- [email protected] - tel: +972.58.520.636, http://www.tkos.co.il
-------------------------------------------------------
This SF.net email is sponsored by: VM Ware
With VMware you can run multiple operating systems on a single machine.
WITHOUT REBOOTING! Mix Linux / Windows / Novell virtual machines at the
same time. Free trial click here: http://www.vmware.com/wl/offer/345/0