Re: brctl doesn't work on sparc64

Nick Fedchik wrote:

>>$ brctl addbr br0
>>gives me "br_add_bridge: Operation not supported". does it mean i didn't
>>patch kernel properly or missed something?
>>i have "vanilla" linux-2.4.22 + ebtables-brnf-3_vs_2.4.22.diff.gz on
>>"Sun Netra X1 (UltraSPARC-IIe 500MHz)".
>>    
>>
>Ops... SPARC-IIe
>
>  
>
>>please advise. i spent too mauch time getting there to give up and
>>install openbsd on that box.
>>    
>>
>Ehhh... I hope than Bart will answer for You.
>AFAIK it could be a spark 32/64 problem...
>
>BTW can You send more tech info here?
>  
>
localhost linux # cat /proc/cpuinfo
cpu             : TI UltraSparc IIe
fpu             : UltraSparc IIe integrated FPU
promlib         : Version 3 Revision 0
prom            : 4.0.9
type            : sun4u
ncpus probed    : 1
ncpus active    : 1
Cpu0Bogo        : 999.42
Cpu0ClkTck      : 000000001dcd6500
MMU Type        : Spitfire

localhost linux # cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Class 0600: PCI device 108e:a001 (rev 0).
      Master Capable.  Latency=40. 
  Bus  0, device   3, function  0:
    Class 0000: PCI device 10b9:7101 (rev 0).
  Bus  0, device   5, function  0:
    Class 0200: PCI device 1282:9102 (rev 49).
      IRQ 6394560.
      Master Capable.  Latency=160.  Min Gnt=20.Max Lat=40.
      I/O at 0x1fe02010100 [0x1fe020101ff].
      Non-prefetchable 32 bit memory at 0x1ff00002000 [0x1ff000020ff].
  Bus  0, device   7, function  0:
    Class 0601: PCI device 10b9:1533 (rev 0).
  Bus  0, device  10, function  0:
    Class 0c03: PCI device 10b9:5237 (rev 3).
      IRQ 6394816.
      Master Capable.  Latency=32.  Max Lat=80.
      Non-prefetchable 32 bit memory at 0x1ff01000000 [0x1ff01000fff].
  Bus  0, device  12, function  0:
    Class 0200: PCI device 1282:9102 (rev 49).
      IRQ 6393856.
      Master Capable.  Latency=160.  Min Gnt=20.Max Lat=40.
      I/O at 0x1fe02010000 [0x1fe020100ff].
      Non-prefetchable 32 bit memory at 0x1ff00000000 [0x1ff000000ff].
  Bus  0, device  13, function  0:
    Class 0101: PCI device 10b9:5229 (rev 195).
      IRQ 6394048.
      Master Capable.  Latency=16.  Min Gnt=2.Max Lat=4.
      I/O at 0x1fe02010200 [0x1fe02010207].
      I/O at 0x1fe02010218 [0x1fe0201021b].
      I/O at 0x1fe02010210 [0x1fe02010217].
      I/O at 0x1fe02010208 [0x1fe0201020b].
      I/O at 0x1fe02010220 [0x1fe0201022f].

localhost linux # dmesg
PROMLIB: Sun IEEE Boot Prom 4.0.9 2001/05/17 21:52
Linux version 2.4.22-sparc ([email protected]) (gcc version egcs-2.92.11 
19980921 (
gcc2 ss-980609 experimental)) #3 Fri Dec 5 03:24:04 CST 2003
ARCH: SUN4U
Ethernet address: 00:03:ba:0c:30:bb
On node 0 totalpages: 64967
zone(0): 98140 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Found CPU 0 (node=f00726a0,mid=0)
Found 1 CPU prom device tree node(s).
Kernel command line: root=/dev/hda4 ide0=noautotune idebus=66
ide_setup: ide0=noautotune
ide_setup: idebus=66
Calibrating delay loop... 999.42 BogoMIPS
Memory: 510488k available (1616k kernel code, 256k data, 112k init) 
[fffff800000
00000,000000006feb8000]
Dentry cache hash table entries: 65536 (order: 7, 1048576 bytes)
Inode cache hash table entries: 32768 (order: 6, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 8192 bytes)
Buffer cache hash table entries: 32768 (order: 5, 262144 bytes)
Page-cache hash table entries: 65536 (order: 6, 524288 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing for controllers.
PCI: Found SABRE, main regs at 000001fe00000000, wsync at 000001fe00001c20
SABRE: Shared PCI config space at 000001fe01000000
SABRE: DVMA at 60000000 [20000000]
PCI: Address space collision on region 6 
[000001ff00080000:000001ff000bffff] of
device PCI device 1282:9102
PCI-IRQ: Routing bus[ 0] slot[ 5] map[0] to INO[1c]
PCI-IRQ: Routing bus[ 0] slot[ a] map[0] to INO[24]
PCI-IRQ: Routing bus[ 0] slot[ c] map[0] to INO[06]
PCI-IRQ: Routing bus[ 0] slot[ d] map[0] to INO[0c]
PCI0(PBMA): Bus running at 33MHz
isa0: [dma] [rtc -> (todm5819)] [power] [SUNW,lomh] [serial] [serial] 
[flashprom
]
ebus: No EBus's found.
PCIO serial driver version 1.54
su(serial) at 0x1fe020003f8 (tty 0 irq 12,7eb) is a 16550A
su(serial) at 0x1fe020002e8 (tty 1 irq 12,7eb) is a 16550A
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1devfs: v1.12c (20020818) Richard Gooch 
([email protected])
devfs: boot_options: 0x1
Real Time Clock Driver v1.10e
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 66MHz system bus speed for PIO modes
ALI15X3: IDE controller at PCI slot 00:0d.0
ALI15X3: chipset revision 195
ALI15X3: 100% native mode on irq 4,7cc
    ide0: BM-DMA at 0x1fe02010220-0x1fe02010227, BIOS settings: hda:pio, 
hdb:pio
    ide1: BM-DMA at 0x1fe02010228-0x1fe0201022f, BIOS settings: hdc:pio, 
hdd:pio
hda: ST340824A, ATA DISK drive
ide0 at 0x1fe02010200-0x1fe02010207,0x1fe0201021a on irq 4,7cc
ide1 at 0x1fe02010210-0x1fe02010217,0x1fe0201020a on irq 4,7cc
hda: attached ide-disk driver.
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=77545/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 p5 p6
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 65536 bind 32768)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Bridge firewalling registered
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Mounted devfs on /dev
Adding Swap: 999920k swap-space (priority -1)
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,4), internal journal
Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
tulip0: Old style EEPROM with no media selection information.
tulip0:  MII transceiver #1 config 3100 status 7829 advertising 01e1.
eth0: Davicom DM9102/DM9102A rev 49 at 0x1fe02010100, EEPROM not 
present, 00:03:
BA:0C:30:BC, IRQ 6394560.
tulip1: Old style EEPROM with no media selection information.
tulip1:  MII transceiver #1 config 3100 status 7809 advertising 01e1.
eth1: Davicom DM9102/DM9102A rev 49 at 0x1fe02010000, EEPROM not 
present, 00:03:
BA:0C:30:BB, IRQ 6393856.
kjournald starting.  Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.




-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click