Re: sopport for multicasting

Op do, 28-06-2007 te 13:57 +0400, schreef Crazy AMD K7:
> Hello all.
> I would like to ask what I should do to make my bridge to support
> multicasting?
> If I am connecting my computer before the bridge everything works ok.
> Behind the bridge everything is ok, but multicasting packets do not pass.
> 
> I am using 2.4.35-pre5 kernel + ebtables-brnf-11-2_vs_2.4.31.diff
> iptables -I FORWARD -j ACCEPT
> sysctl: net.ipv4.conf.bridge0.force_igmp_version = 2
> ( echo 2>/proc/sys/net/ipv4/conf/bridge0/force_igmp_version )
> .config
> CONFIG_IP_MULTICAST=y
> CONFIG_IP_MROUTE=y
> CONFIG_IP_PIMSM_V1=y
> CONFIG_IP_PIMSM_V2=y
> CONFIG_BRIDGE=y
> # CONFIG_BRIDGE_NF_EBTABLES is not set
> 
> What else I should do on the bridge?

Are you using iptables rules that could be the cause of these problems?
Does it work without the bridge patch?

cheers,
Bart



-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/