[PATCH net-next 10/10] selftests: forwarding: Add test for BR_BOOLOPT_FDB_LOCAL_VLAN_0

Add a selftest to check the operation of this newly-introduced bridge
option.

Signed-off-by: Petr Machata <[email protected]>
---

Notes:
CC: Shuah Khan <[email protected]>
CC: [email protected]

 .../testing/selftests/net/forwarding/Makefile |   1 +
 .../net/forwarding/bridge_fdb_local_vlan_0.sh | 374 ++++++++++++++++++
 2 files changed, 375 insertions(+)
 create mode 100755 tools/testing/selftests/net/forwarding/bridge_fdb_local_vlan_0.sh

diff --git a/tools/testing/selftests/net/forwarding/Makefile b/tools/testing/selftests/net/forwarding/Makefile
index 0a0d4c2a85f7..e6f482a600da 100644
--- a/tools/testing/selftests/net/forwarding/Makefile
+++ b/tools/testing/selftests/net/forwarding/Makefile
@@ -5,6 +5,7 @@ TEST_PROGS = \
 	bridge_fdb_learning_limit.sh \
 	bridge_igmp.sh \
 	bridge_locked_port.sh \
+	bridge_fdb_local_vlan_0.sh \
 	bridge_mdb.sh \
 	bridge_mdb_host.sh \
 	bridge_mdb_max.sh \
diff --git a/tools/testing/selftests/net/forwarding/bridge_fdb_local_vlan_0.sh b/tools/testing/selftests/net/forwarding/bridge_fdb_local_vlan_0.sh
new file mode 100755
index 000000000000..5a0b43aff5aa
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_fdb_local_vlan_0.sh
@@ -0,0 +1,374 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# +-----------------------+ +-----------------------+ +-----------------------+
+# | H1 (vrf)              | | H2 (vrf)              | | H3 (vrf)              |
+# |    + $h1              | |    + $h2              | |    + $h3              |
+# |    | 192.0.2.1/28     | |    | 192.0.2.2/28     | |    | 192.0.2.18/28    |
+# |    | 2001:db8:1::1/64 | |    | 2001:db8:1::2/64 | |    | 2001:db8:2::2/64 |
+# |    |                  | |    |                  | |    |                  |
+# +----|------------------+ +----|------------------+ +----|------------------+
+#      |                         |                         |
+# +----|-------------------------|-------------------------|------------------+
+# | +--|-------------------------|------------------+      |                  |
+# | |  + $swp1                   + $swp2            |      + $swp3            |
+# | |                                               |        192.0.2.17/28    |
+# | |  BR1 (802.1q)                                 |        2001:db8:2::1/64 |
+# | |  192.0.2.3/28                                 |                         |
+# | |  2001:db8:1::3/64                             |                         |
+# | +-----------------------------------------------+                      SW |
+# +---------------------------------------------------------------------------+
+#
+#shellcheck disable=SC2317 # SC doesn't see our uses of functions.
+#shellcheck disable=SC2034 # ... and global variables
+
+ALL_TESTS="
+	test_d_no_sharing
+	test_d_sharing
+	test_q_no_sharing
+	test_q_sharing
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+pMAC=00:11:22:33:44:55
+bMAC=00:11:22:33:44:66
+mMAC=00:11:22:33:44:77
+xMAC=00:11:22:33:44:88
+
+host_create()
+{
+	local h=$1; shift
+	local ipv4=$1; shift
+	local ipv6=$1; shift
+
+	simple_if_init "$h" "$ipv4" "$ipv6"
+	defer simple_if_fini "$h" "$ipv4" "$ipv6"
+
+	ip_route_add vrf "v$h" 192.0.2.16/28 nexthop via 192.0.2.3
+	ip_route_add vrf "v$h" 2001:db8:2::/64 nexthop via 2001:db8:1::3
+}
+
+h3_create()
+{
+	simple_if_init "$h3" 192.0.2.18/28 2001:db8:2::2/64
+	defer simple_if_fini "$h3" 192.0.2.18/28 2001:db8:2::2/64
+
+	ip_route_add vrf "v$h3" 192.0.2.0/28 nexthop via 192.0.2.17
+	ip_route_add vrf "v$h3" 2001:db8:1::/64 nexthop via 2001:db8:2::1
+
+	tc qdisc add dev "$h3" clsact
+	defer tc qdisc del dev "$h3" clsact
+
+	tc filter add dev "$h3" ingress proto ip pref 104 \
+	   flower skip_hw ip_proto udp dst_port 4096 \
+	   action pass
+	defer tc filter del dev "$h3" ingress proto ip pref 104
+
+	tc qdisc add dev "$h2" clsact
+	defer tc qdisc del dev "$h2" clsact
+
+	tc filter add dev "$h2" ingress proto ip pref 104 \
+	   flower skip_hw ip_proto udp dst_port 4096 \
+	   action pass
+	defer tc filter del dev "$h2" ingress proto ip pref 104
+}
+
+switch_create()
+{
+	ip_link_set_up "$swp1"
+
+	ip_link_set_up "$swp2"
+
+	ip_addr_add "$swp3" 192.0.2.17/28
+	ip_addr_add "$swp3" 2001:db8:2::1/64
+	ip_link_set_up "$swp3"
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	defer vrf_cleanup
+
+	forwarding_enable
+	defer forwarding_restore
+
+	host_create "$h1" 192.0.2.1/28 2001:db8:1::1/64
+	host_create "$h2" 192.0.2.2/28 2001:db8:1::2/64
+	h3_create
+
+	switch_create
+}
+
+adf_bridge_create()
+{
+	local dev
+	local mac
+
+	ip_link_add br up type bridge vlan_default_pvid 0 "$@"
+	mac=$(mac_get br)
+	ip_addr_add br 192.0.2.3/28
+	ip_addr_add br 2001:db8:1::3/64
+
+	bridge_vlan_add dev br vid 1 pvid untagged self
+	bridge_vlan_add dev br vid 2 self
+	bridge_vlan_add dev br vid 3 self
+
+	for dev in "$swp1" "$swp2"; do
+		ip_link_set_master "$dev" br
+		bridge_vlan_add dev "$dev" vid 1 pvid untagged
+		bridge_vlan_add dev "$dev" vid 2
+		bridge_vlan_add dev "$dev" vid 3
+	done
+
+	ip_link_set_addr br "$mac"
+}
+
+check_fdb_local_vlan_0_support()
+{
+	if ip_link_add XXbr up type bridge vlan_filtering 1 fdb_local_vlan_0 1 \
+		    &>/dev/null; then
+		return 0
+	fi
+
+	log_test_skip "FDB sharing" \
+		      "iproute 2 or the kernel do not support fdb_local_vlan_0"
+}
+
+check_mac_presence()
+{
+	local should_fail=$1; shift
+	local dev=$1; shift
+	local vlan=$1; shift
+	local mac
+
+	mac=$(mac_get "$dev")
+
+	if ((vlan == 0)); then
+		vlan=null
+	fi
+
+	bridge -j fdb show dev "$dev" |
+	    jq -e --arg mac "$mac" --argjson vlan "$vlan" \
+	       '.[] | select(.mac == $mac) | select(.vlan == $vlan)' > /dev/null
+	check_err_fail "$should_fail" $? "FDB dev $dev vid $vlan addr $mac exists"
+}
+
+do_sharing_test()
+{
+	local should_fail=$1; shift
+	local what=$1; shift
+	local dev
+
+	RET=0
+
+	for dev in "$swp1" "$swp2" br; do
+		check_mac_presence 0 "$dev" 0
+		check_mac_presence "$should_fail" "$dev" 1
+		check_mac_presence "$should_fail" "$dev" 2
+		check_mac_presence "$should_fail" "$dev" 3
+	done
+
+	log_test "$what"
+}
+
+do_end_to_end_test()
+{
+	local mac=$1; shift
+	local what=$1; shift
+	local probe_dev=${1-$h3}; shift
+	local expect=${1-10}; shift
+
+	local t0
+	local t1
+	local dd
+
+	RET=0
+
+	# In mausezahn, use $dev MAC as the destination MAC. In the MAC sharing
+	# context, that will cause an FDB miss on VLAN 1 and prompt a second
+	# lookup in VLAN 0.
+
+	t0=$(tc_rule_stats_get "$probe_dev" 104 ingress)
+
+	$MZ "$h1" -c 10 -p 64 -a own -b "$mac" \
+		  -A 192.0.2.1 -B 192.0.2.18 -t udp "dp=4096,sp=2048" -q
+	sleep 1
+
+	t1=$(tc_rule_stats_get "$probe_dev" 104 ingress)
+	dd=$((t1 - t0))
+
+	((dd == expect))
+	check_err $? "Expected $expect packets on $probe_dev got $dd"
+
+	log_test "$what"
+}
+
+do_tests()
+{
+	local should_fail=$1; shift
+	local what=$1; shift
+	local swp1_mac
+	local br_mac
+
+	swp1_mac=$(mac_get "$swp1")
+	br_mac=$(mac_get br)
+
+	do_sharing_test "$should_fail" "$what"
+	do_end_to_end_test "$swp1_mac" "$what: end to end, $swp1 MAC"
+	do_end_to_end_test "$br_mac" "$what: end to end, br MAC"
+}
+
+bridge_standard()
+{
+	local vlan_filtering=$1; shift
+
+	if ((vlan_filtering)); then
+		echo 802.1q
+	else
+		echo 802.1d
+	fi
+}
+
+nonexistent_fdb_test()
+{
+	local vlan_filtering=$1; shift
+	local standard
+
+	standard=$(bridge_standard "$vlan_filtering")
+
+	# We expect flooding, so $h2 should get the traffic.
+	do_end_to_end_test "$xMAC" "$standard: Nonexistent FDB" "$h2"
+}
+
+misleading_fdb_test()
+{
+	local vlan_filtering=$1; shift
+	local standard
+
+	standard=$(bridge_standard "$vlan_filtering")
+
+	defer_scope_push
+		# Add an FDB entry on VLAN 0. The lookup on VLAN-aware bridge
+		# shouldn't pick this up even with fdb_local_vlan_0 enabled, so
+		# the traffic should be flooded. This all holds on
+		# vlan_filtering bridge, on non-vlan_filtering one the FDB entry
+		# is expected to be found as usual, no flooding takes place.
+		#
+		# Adding only on VLAN 0 is a bit tricky, because bridge is
+		# trying to be nice and interprets the request as if the FDB
+		# should be added on each VLAN.
+
+		bridge fdb add "$mMAC" dev "$swp1" master
+		bridge fdb del "$mMAC" dev "$swp1" vlan 1 master
+		bridge fdb del "$mMAC" dev "$swp1" vlan 2 master
+		bridge fdb del "$mMAC" dev "$swp1" vlan 3 master
+
+		local expect=$((vlan_filtering ? 10 : 0))
+		do_end_to_end_test "$mMAC" \
+				   "$standard: Lookup of non-local MAC on VLAN 0" \
+				   "$h2" "$expect"
+	defer_scope_pop
+}
+
+change_mac()
+{
+	local dev=$1; shift
+	local mac=$1; shift
+	local cur_mac
+
+	cur_mac=$(mac_get "$dev")
+
+	log_info "Change $dev MAC $cur_mac -> $mac"
+	ip_link_set_addr "$dev" "$mac"
+	defer log_info "Change $dev MAC back"
+}
+
+do_test_no_sharing()
+{
+	local vlan_filtering=$1; shift
+	local standard
+
+	standard=$(bridge_standard "$vlan_filtering")
+
+	adf_bridge_create vlan_filtering "$vlan_filtering"
+	setup_wait
+
+	do_tests 0 "$standard, no FDB sharing"
+
+	change_mac "$swp1" "$pMAC"
+	change_mac br "$bMAC"
+
+	do_tests 0 "$standard, no FDB sharing after MAC change"
+
+	in_defer_scope check_fdb_local_vlan_0_support || return
+
+	log_info "Set fdb_local_vlan_0=1"
+	ip link set dev br type bridge fdb_local_vlan_0 1
+
+	do_tests 1 "$standard, fdb sharing after toggle"
+}
+
+do_test_sharing()
+{
+	local vlan_filtering=$1; shift
+	local standard
+
+	standard=$(bridge_standard "$vlan_filtering")
+
+	in_defer_scope check_fdb_local_vlan_0_support || return
+
+	adf_bridge_create vlan_filtering "$vlan_filtering" fdb_local_vlan_0 1
+	setup_wait
+
+	do_tests 1 "$standard, FDB sharing"
+
+	nonexistent_fdb_test "$vlan_filtering"
+	misleading_fdb_test "$vlan_filtering"
+
+	change_mac "$swp1" "$pMAC"
+	change_mac br "$bMAC"
+
+	do_tests 1 "$standard, FDB sharing after MAC change"
+
+	log_info "Set fdb_local_vlan_0=0"
+	ip link set dev br type bridge fdb_local_vlan_0 0
+
+	do_tests 0 "$standard, No FDB sharing after toggle"
+}
+
+test_d_no_sharing()
+{
+	do_test_no_sharing 0
+}
+
+test_d_sharing()
+{
+	do_test_sharing 0
+}
+
+test_q_no_sharing()
+{
+	do_test_no_sharing 1
+}
+
+test_q_sharing()
+{
+	do_test_sharing 1
+}
+
+
+trap cleanup EXIT
+
+setup_prepare
+tests_run
-- 
2.49.0