[PATCHv3 net-next 5/5] selftests/net: add offload checking test for virtual interface

Hangbin Liu <[email protected]>
Newsgroups gmane.linux.network.bridge,gmane.linux.network
Message-ID <[email protected]>
make sure the virtual interface offload setting is correct after
changing lower devices.

Signed-off-by: Hangbin Liu <[email protected]>
---
 tools/testing/selftests/net/Makefile        |   1 +
 tools/testing/selftests/net/config          |   1 +
 tools/testing/selftests/net/vdev_offload.sh | 137 ++++++++++++++++++++
 3 files changed, 139 insertions(+)
 create mode 100755 tools/testing/selftests/net/vdev_offload.sh

diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 8c860782f9cd..c77c55677a3a 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -119,6 +119,7 @@ TEST_PROGS += tfo_passive.sh
 TEST_PROGS += broadcast_pmtu.sh
 TEST_PROGS += ipv6_force_forwarding.sh
 TEST_PROGS += route_hint.sh
+TEST_PROGS += vdev_offload.sh
 
 # YNL files, must be before "include ..lib.mk"
 YNL_GEN_FILES := busy_poller
diff --git a/tools/testing/selftests/net/config b/tools/testing/selftests/net/config
index d548611e2698..da4212373b84 100644
--- a/tools/testing/selftests/net/config
+++ b/tools/testing/selftests/net/config
@@ -128,3 +128,4 @@ CONFIG_NETKIT=y
 CONFIG_NET_PKTGEN=m
 CONFIG_IPV6_ILA=m
 CONFIG_IPV6_RPL_LWTUNNEL=y
+CONFIG_NET_TEAM=m
diff --git a/tools/testing/selftests/net/vdev_offload.sh b/tools/testing/selftests/net/vdev_offload.sh
new file mode 100755
index 000000000000..17b89a40a7d3
--- /dev/null
+++ b/tools/testing/selftests/net/vdev_offload.sh
@@ -0,0 +1,137 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# shellcheck disable=SC1091
+source lib.sh
+
+# Set related offload on lower deivces and check if upper device re-compute
+# Some features are fixed on veth interface. Just list here in case we have a
+# better way to test in future.
+set_offload()
+{
+	local dev="$1"
+	local state="$2"
+
+	# VLAN features
+	# NETIF_F_FRAGLIST: tx-scatter-gather-fraglist
+	# shellcheck disable=SC2154
+	ip netns exec "$ns" ethtool -K "$dev" tx-scatter-gather-fraglist "$state"
+
+	# ENC features
+	# NETIF_F_RXCSUM: rx-checksum (bond/team/bridge fixed)
+
+	# XFRM features (veth fixed, netdevsim supports)
+	# NETIF_F_HW_ESP: esp-hw-offload
+	# NETIF_F_GSO_ESP: tx-esp-segmentation
+
+	# GSO partial features
+	# NETIF_F_GSO_PARTIAL: tx-gso-partial (veth/bond fixed)
+
+	# Common features
+	# NETIF_F_SG: tx-scatter-gather
+	ip netns exec "$ns" ethtool -K "$dev" tx-scatter-gather "$state" &> /dev/null
+	# NETIF_F_GSO_SOFTWARE: NETIF_F_GSO_ACCECN: tx-tcp-accecn-segmentation
+	ip netns exec "$ns" ethtool -K "$dev" tx-tcp-accecn-segmentation "$state"
+	# NETIF_F_GSO_SOFTWARE: NETIF_F_GSO_SCTP: tx-sctp-segmentation
+	ip netns exec "$ns" ethtool -K "$dev" tx-sctp-segmentation "$state"
+	# NETIF_F_GSO_SOFTWARE: NETIF_F_GSO_FRAGLIST: tx-gso-list
+	ip netns exec "$ns" ethtool -K "$dev" tx-gso-list "$state"
+}
+
+__check_offload()
+{
+	local dev=$1
+	local opt=$2
+	local expect=$3
+
+	ip netns exec "$ns" ethtool --json -k "$dev" | \
+		jq -r -e ".[].\"$opt\".active == ${expect}" >/dev/null
+}
+
+check_offload()
+{
+	local dev=$1
+	local state=$2
+
+	__check_offload "$dev" "tx-scatter-gather-fraglist" "$state" || RET=1
+	__check_offload "$dev" "tx-scatter-gather" "$state" || RET=1
+	__check_offload "$dev" "tx-tcp-accecn-segmentation" "$state" || RET=1
+	__check_offload "$dev" "tx-sctp-segmentation" "$state" || RET=1
+	__check_offload "$dev" "tx-gso-list" "$state" || RET=1
+}
+
+setup_veth()
+{
+	# Set up test netns
+	setup_ns ns switch
+
+	# shellcheck disable=SC2154
+	ip -n "$ns" link add veth0 type veth peer name veth0 netns "$switch"
+	ip -n "$ns" link add veth1 type veth peer name veth1 netns "$switch"
+	ip -n "$switch" link set veth0 up
+	ip -n "$switch" link set veth1 up
+
+	link_0=veth0
+	link_1=veth1
+}
+
+cleanup()
+{
+	cleanup_all_ns
+}
+
+setup_bond()
+{
+	ip -n "$ns" link set "$link_0" nomaster
+	ip -n "$ns" link set "$link_1" nomaster
+	ip -n "$ns" link add bond0 type bond mode active-backup miimon 100
+	ip -n "$ns" link set "$link_0" master bond0
+	ip -n "$ns" link set "$link_1" master bond0
+	ip -n "$ns" link set bond0 up
+}
+
+setup_team()
+{
+	ip -n "$ns" link set "$link_0" nomaster
+	ip -n "$ns" link set "$link_1" nomaster
+	ip -n "$ns" link add team0 type team
+	ip -n "$ns" link set "$link_0" master team0
+	ip -n "$ns" link set "$link_1" master team0
+	ip -n "$ns" link set team0 up
+}
+
+setup_bridge()
+{
+	ip -n "$ns" link set "$link_0" nomaster
+	ip -n "$ns" link set "$link_1" nomaster
+	ip -n "$ns" link add br0 type bridge
+	ip -n "$ns" link set "$link_0" master br0
+	ip -n "$ns" link set "$link_1" master br0
+	ip -n "$ns" link set br0 up
+}
+
+do_test()
+{
+	local dev=$1
+
+	RET=0
+	set_offload veth0 "on"
+	set_offload veth1 "on"
+	check_offload "$dev" "true"
+	log_test "$dev" "enable offload"
+
+	RET=0
+	set_offload veth0 "off"
+	set_offload veth1 "off"
+	check_offload "$dev" "false"
+	log_test "$dev" "disable offload"
+}
+
+trap cleanup EXIT
+setup_veth
+setup_bond
+do_test bond0
+setup_team
+do_test team0
+setup_bridge
+do_test br0
-- 
2.50.1
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.