Re: Simple Example isnt working (ssh/bulk traffic)

On Tuesday 04 December 2007 20:45:54 Andreas Mueller wrote:
> Hello,
>
> Julius wrote:
> > Hi,
> >
> > the script below should allow to get ssh connections running well while
> > downloading, but even the 100kbps (100kbyte/s?) doesnt work - can still
> > download with 500+kb/s. Whats wrong?
> >
> > INTERFACE=eth0
>
> are you mixing egress with ingress? (IMQ in that case)
> What's you network-configuration (it's a router? what eths)?

ah, yes i did.

INTERFACE=ppp0

#alles löschen
tc qdisc del dev $INTERFACE root

tc qdisc add dev $INTERFACE root handle 1:0 htb default 15
tc class add dev $INTERFACE parent 1:0 classid 1:1 htb rate 11kbps
tc class add dev $INTERFACE parent 1:1 classid 1:5 htb rate 6kbps ceil 11kbps 
prio 2
tc class add dev $INTERFACE parent 1:1 classid 1:15 htb rate 5kbps ceil 11kbps 
prio 10
#ssh filtern
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip dport 
22 0xffff flowid 1:5
tc filter add dev $INTERFACE protocol ip parent 1:0 prio 1 u32 match ip sport 
22 0xffff flowid 1:5



Network setup:

my pc ---- internet ---- router@home



I want to connect to router@home, traffic shaping is done on the router.
The router can do 120kb/s down and 14kb/s up. This works so far, have to test 
these settings for some time.

greets
Julius