Re: tc doesn't shape correct {SOLVED}

My issue is solved.

Andy Furniss has mailed me a new set of rules which are doing exactly 
what you expect.

For the record, here are the rules:
/sbin/tc qdisc del dev bond1 root
/sbin/tc qdisc add dev bond1 root handle 1: htb
/sbin/tc class add dev bond1 parent 1: classid 1:1 htb rate 30mbit
/sbin/tc qdisc add dev bond1 parent 1:1 handle 10: pfifo limit 300
/sbin/tc class add dev bond1 parent 1: classid 1:2 htb rate 10mbit
/sbin/tc qdisc add dev bond1 parent 1:2 handle 20: pfifo limit 100
/sbin/tc filter add dev bond1 parent 1: protocol ip prio 0 handle 1 fw 
flowid 1:1
/sbin/tc filter add dev bond1 parent 1: protocol ip prio 0 handle 2 fw 
flowid 1:2

Thx for helping to fix this!
Johan

Johan Huysmans wrote:
> Hi All,
>
> I'm configuring my natting-firewall to do some tc shaping. Some 
> traffic has to be shaped on 30mbit, some on 10mbit all the others are 
> unlimited.
> The configuring  and filtering works correctly. The traffic that is 
> shaped at 30mbit is correct, but the traffic that is shapped at 10mbit 
> only gets to 100KB/sec.
>
> It is on a device configured with bonding (both in and out interface).
>
> Any clue why shaped traffic at 10mbit only gets to 100KB/sec and not 
> faster?
>
> Thx for any response,
> Johan Huysmans
> _______________________________________________
> LARTC mailing list
> [email protected]
> http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc