How to upgrade firmware for the Ruckus ICX7150 Campus layer 3 network switch

Subject: How to upgrade firmware for the Ruckus ICX7150 Campus layer 3
network switch

Author: Mr. Turritopsis Dohrnii Teo En Ming (TARGETED INDIVIDUAL)
Country: Singapore
Date of upgrading firmware: 8 Jun 2023 Thursday

Reference guide 1: copy tftp flash
Link: https://docs.ruckuswireless.com/fastiron/08.0.50/fastiron-08050-comma=
ndref/GUID-CF74D567-AB68-46DA-A008-7195BB145763.html

Reference guide 2: Ruckus Switch Firmware Upgrade =E2=80=93 A How-To
Link: https://www.dentonsolutions.com/2018/08/01/ruckus-switch-firmware-upg=
rade-how-to/

CONCISE INSTRUCTIONS
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D

1. Download Open TFTP Server for Windows.
Download link: https://sourceforge.net/projects/tftp-server/

2. Install OpenTFTP Server.

3. Copy the firmware files to C:\OpenTFTPServer\

4. Double click RunStandAloneMT.bat.

5. Putty into your Ruckus ICX7150 campus network switch.

6. Execute the following CLI commands.

SSH@ICX7150-48PF Switch>enable

SSH@ICX7150-48PF Switch#copy tftp flash <IP address of TFTP server>
SPS08095jufi.bin primary

SSH@ICX7150-48PF Switch#config terminal

SSH@ICX7150-48PF Switch(config) #boot system flash primary

SSH@ICX7150-48PF Switch(config) #write memory

SSH@ICX7150-48PF Switch(config) #show running-config | include boot
boot sys fl pri

SSH@ICX7150-48PF Switch#reload
Are you sure? (enter 'y' or 'n'): y

After the switch has rebooted, check and make sure you have upgraded
to the correct firmware version.

SSH@ICX7150-48PF Switch#show version

That's all. This is a very concise guide that I have written.

Regards,

Mr. Turritopsis Dohrnii Teo En Ming
Targeted Individual in Singapore
Blogs:
https://tdtemcerts.blogspot.com
https://tdtemcerts.wordpress.com
GIMP also stands for Government-Induced Medical Problems.