Re: [PATCH 2/4] dt-bindings: net: dsa: Add SoC-e switch IP and DSA bindings

Vasilij Strassheim <[email protected]>
Newsgroups gmane.linux.drivers.devicetree,gmane.linux.network,gmane.linux.kernel
Organization Linutronix GmbH
Message-ID <[email protected]>
On Wed, 2026-07-29 at 13:07 -0500, Rob Herring (Arm) wrote:
> On Wed, 29 Jul 2026 18:36:55 +0200, Vasilij Strassheim wrote:
> > Add DT schema documentation for SoC-e FPGA switch devices.
> > The binding is split into:
> >  - a switch IP node describing the MMIO register block
> >  - a DSA MDIO node describing the DSA-facing switch instance
> > Both nodes are linked through the soce,switch-ip phandle.
> > 
> > Signed-off-by: Vasilij Strassheim <[email protected]>
> > ---
> >  .../bindings/net/dsa/soce,switch-dsa.yaml          | 195 +++++++++++++++++++++
> >  .../bindings/net/dsa/soce,switch-ip.yaml           |  54 ++++++
> >  2 files changed, 249 insertions(+)
> > 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/net/dsa/soce,switch-ip.example.dtb: switch@80020000 (soce,mrs-24-01): reg: [[0, 2147614720], [0, 65536]] is too long
> 	from schema $id: http://devicetree.org/schemas/net/dsa/soce,switch-ip.yaml
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.kernel.org/project/devicetree/patch/20260729-devel-vstrassheim-soce-dsa-ml-v1-2-be569dae1b20-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org
> 
I can reproduce that and will fix it. I have to make a lot changes there
before re-submitting.

> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.

Got ot, I'll rebase the next version to net-next and add the information in
this patch.

> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

Thanks for the tips! I will clean up and test it.

Vasilij
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.