[PATCH net-next 1/2] net: stmmac: dwmac-socfpga: Enable multi-IRQ when per-queue IRQs present

From: Nazim Amirul <[email protected]>

Agilex5 and other SoCFPGA platforms can wire per-DMA-channel TX/RX
completion interrupts through the GIC as named platform IRQs. The common
stmmac platform code already parses "tx-queue-N" / "rx-queue-N".

Follow the same approach as dwmac-s32: if all configured TX and RX queue
IRQs are present, set STMMAC_FLAG_MULTI_MSI_EN so the existing multi-IRQ
request path and INTM=1 programming are used. Otherwise keep the single
macirq path.

Signed-off-by: Nazim Amirul <[email protected]>
---
 .../ethernet/stmicro/stmmac/dwmac-socfpga.c   | 31 +++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 1d7f0a57d288..0e02f80aafee 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -593,6 +593,35 @@ static void socfpga_agilex5_setup_plat_dat(struct socfpga_dwmac *dwmac)
 	plat_dat->crosststamp = smtg_crosststamp;
 }
 
+static void socfpga_dwmac_setup_multi_irq(struct device *dev,
+					  struct plat_stmmacenet_data *plat,
+					  struct stmmac_resources *res)
+{
+	int i;
+
+	for (i = 0; i < plat->rx_queues_to_use; i++) {
+		if (res->rx_irq[i] <= 0) {
+			dev_dbg(dev, "Missing RX queue %d interrupt\n", i);
+			goto mac_irq_mode;
+		}
+	}
+
+	for (i = 0; i < plat->tx_queues_to_use; i++) {
+		if (res->tx_irq[i] <= 0) {
+			dev_dbg(dev, "Missing TX queue %d interrupt\n", i);
+			goto mac_irq_mode;
+		}
+	}
+
+	plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
+	dev_info(dev, "Multi-IRQ mode (per queue IRQs) selected\n");
+	return;
+
+mac_irq_mode:
+	plat->flags &= ~STMMAC_FLAG_MULTI_MSI_EN;
+	dev_dbg(dev, "MAC IRQ mode selected\n");
+}
+
 static int socfpga_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -652,6 +681,8 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 
 	ops->setup_plat_dat(dwmac);
 
+	socfpga_dwmac_setup_multi_irq(dev, plat_dat, &stmmac_res);
+
 	return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
 }
 
-- 
2.43.7