Re: [PATCH net-next v13 00/11] enic: SR-IOV V2 admin channel and MBOX protocol

[email protected]
Newsgroups gmane.linux.network,gmane.linux.kernel
Message-ID <178701422164.1808735.9583213568071804672.git-patchwork-notify@kernel.org>
Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <[email protected]>:

On Wed, 12 Aug 2026 05:48:00 -0700 you wrote:
> This series adds the admin channel infrastructure and mailbox (MBOX)
> protocol needed for V2 SR-IOV support in the enic driver.
> 
> The V2 SR-IOV design uses a direct PF-VF communication channel built on
> dedicated WQ/RQ/CQ hardware resources and an MSI-X interrupt.
> 
> This series touches enic_remove(), which is also modified by a fix
> already applied to net:
> 
> [...]

Here is the summary with links:
  - [net-next,v13,01/11] enic: verify firmware supports V2 SR-IOV at probe time
    https://git.kernel.org/netdev/net-next/c/a16975e2231b
  - [net-next,v13,02/11] enic: add admin channel open and close for SR-IOV
    https://git.kernel.org/netdev/net-next/c/3258931d4052
  - [net-next,v13,03/11] enic: add admin RQ buffer management
    https://git.kernel.org/netdev/net-next/c/a0da4ea750a2
  - [net-next,v13,04/11] enic: add admin CQ service with MSI-X interrupt and workqueue polling
    https://git.kernel.org/netdev/net-next/c/cb1dba54c723
  - [net-next,v13,05/11] enic: define MBOX message types and header structures
    https://git.kernel.org/netdev/net-next/c/1584793311ce
  - [net-next,v13,06/11] enic: add MBOX core send and receive for admin channel
    https://git.kernel.org/netdev/net-next/c/1f0c856b5963
  - [net-next,v13,07/11] enic: add MBOX PF handlers for VF register and capability
    https://git.kernel.org/netdev/net-next/c/06bdfb16216b
  - [net-next,v13,08/11] enic: add MBOX VF handlers for capability, register and link state
    https://git.kernel.org/netdev/net-next/c/72b65c94058e
  - [net-next,v13,09/11] enic: wire V2 SR-IOV enable with admin channel and MBOX
    https://git.kernel.org/netdev/net-next/c/4ff204cef01e
  - [net-next,v13,10/11] enic: add V2 VF probe with admin channel and PF registration
    https://git.kernel.org/netdev/net-next/c/b2dfdc966b65
  - [net-next,v13,11/11] enic: re-establish V2 VF admin channel and PF registration after reset
    https://git.kernel.org/netdev/net-next/c/885f462fe90e

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.