Re: RPi - Stretch - Home Network

Luca

I've no idea how to do that but will try and find out.

Thanks

Charles

On 3 Oct 2017 12:51 p.m., "Luca Deri" <[email protected]> wrote:

> Charles
> please open a ticket on github so we can track this
>
> Thanks Luca
>
> On 09/30/2017 01:21 PM, Charles Hooper wrote:
>
> And it would be great to have an official build from you rather than me
> making another mess of the make as i did last time. I would imagine other
> RPi users would also be grateful.
>
> I presume you would put it in a folder http://packages.ntop.org/
> RaspberryPI/stretch_pi/
>
> Charles
>
> On 29 Sep 2017 10:11 a.m., "Charles Hooper" <[email protected]>
> wrote:
>
> Luca,
>
> It's just the next Debian release (v9) see https://www.debian.org/rel
> eases/
>
> On RaspberryPi, Debian is called Raspbian see https://www.raspberrypi.or
> g/downloads/raspbian/
>
> Charles
>
> On 29 September 2017 at 09:30, Luca Deri <[email protected]> wrote:
>
>> Charles
>> perhaps a static build would help. I am not familiar with Stretch: what
>> is it and where I can find it?
>>
>> Regards Luca
>>
>> On 29 Sep 2017, at 02:21, Charles Hooper <[email protected]>
>> wrote:
>>
>> Luca,
>>
>> Thanks for the response. I reinstalled from the beginning.
>>
>> However, I had to use Stretch not Jessie because RPI has moved on from Jessie as its default.
>>
>> I got to the last step in the instructions on http://packages.ntop.org/RaspberryPI/ (hoping the Jessie install would be ok)
>>
>> but got the following which I think means I need a Stretch specific build. Any chance you could do one?
>>
>> Charles
>>
>> root@raspberrypi:/home/pi# apt-get install ntopng nprobe
>> Reading package lists... Done
>> Building dependency tree
>> Reading state information... Done
>> Some packages could not be installed. This may mean that you have
>> requested an impossible situation or if you are using the unstable
>> distribution that some required packages have not yet been created
>> or been moved out of Incoming.
>> The following information may help to resolve the situation:
>>
>> The following packages have unmet dependencies:
>>  nprobe : Depends: libzmq3 but it is not installable
>>           Depends: libhiredis0.10 but it is not installable
>>           Recommends: ntopng-data but it is not going to be installed
>>  ntopng : Depends: librrd4 but it is not installable
>>           Depends: libzmq3 but it is not installable
>>           Depends: libssl1.0.0 but it is not installable
>>           Depends: libhiredis0.10 but it is not installable
>>           Depends: libmysqlclient18 but it is not installable
>>           Recommends: ntopng-data but it is not going to be installed
>> E: Unable to correct problems, you have held broken packages.
>>
>> <end>
>>
>> =======
>>
>> Hi Charles
>>
>> packages have been just rebuilt. You do not need nProbe. In order to start ntopng you need to be root.
>>
>> Please see the ntopng user’s guide at http://www.ntop.org/support/documentation/documentation/ <http://www.ntop.org/support/documentation/documentation/>
>>
>> Regards Luca
>>
>>
>> >* On 28 Sep 2017, at 04:43, Charles Hooper <charles at futurescope.co.uk <http://listgateway.unipi.it/mailman/listinfo/ntop>> wrote:
>> *> >* I am a newbie so please forgive me if I ask a dumb question.
>> *> >* I'm trying to install topng on my RPi with Stretch to monitor my home network (Mikrotik router).
>> *> >* The latest build you have is 2.5 for Jessie.
>> *> >* The easiest thing would be to ask you to rebuild ntopng on stretch so I can just install it, but I thought I would have a go myself!!
>> *> >* After many trials I think I've installed the latest version. however the ntopng web page is not available on port 3000.
>> *> >* the log says
>> *>* ====
>> *>* 28/Sep/2017 11:10:01 [Trace.cpp:116] Logging into /var/tmp/ntopng/ntopng.log
>> *>* 28/Sep/2017 11:10:01 [Ntop.cpp:1419] Setting local networks to 127.0.0.0/8 <http://127.0.0.0/8> <http://127.0.0.0/8 <http://127.0.0.0/8>>
>> *>* 28/Sep/2017 11:10:01 [Redis.cpp:111] Successfully connected to redis 127.0.0.1 <http://127.0.0.1/>:6379 at 0 <http://listgateway.unipi.it/mailman/listinfo/ntop>
>> *>* 28/Sep/2017 11:10:01 [Redis.cpp:111] Successfully connected to redis 127.0.0.1 <http://127.0.0.1/>:6379 at 0 <http://listgateway.unipi.it/mailman/listinfo/ntop>
>> *>* 28/Sep/2017 11:10:09 [Ntop.cpp:1357] Parent process is exiting (this is normal)
>> *>* 28/Sep/2017 11:10:10 [NetworkDiscovery.cpp:48] ERROR: Unable to create pcap socket [1/Operation not permitted]
>> *>* 28/Sep/2017 11:10:17 [main.cpp:221] ERROR: Unable to create interface eth0
>> *>* 28/Sep/2017 11:10:23 [main.cpp:221] ERROR: Unable to create interface lo
>> *>* 28/Sep/2017 11:10:23 [main.cpp:280] ERROR: Startup error: missing super-user privileges ?
>> *>* ====
>> *> >* and when I try to install nprobe (because I think it is missing) I get
>> *> >* ====
>> *>* sudo apt-get install nprobe
>> *>* Reading package lists... Done
>> *>* Building dependency tree
>> *>* Reading state information... Done
>> *>* Some packages could not be installed. This may mean that you have
>> *>* requested an impossible situation or if you are using the unstable
>> *>* distribution that some required packages have not yet been created
>> *>* or been moved out of Incoming.
>> *>* The following information may help to resolve the situation:
>> *> >* The following packages have unmet dependencies:
>> *>*  nprobe : Depends: libzmq3 but it is not installable
>> *>*           Depends: libhiredis0.10 but it is not installable
>> *>* E: Unable to correct problems, you have held broken packages.
>> *>* ====
>> *> >* Any ideas what I am doing wrong?
>> *> >* Charles
>> *>* _______________________________________________
>> *>* Ntop mailing list
>> *>* Ntop at listgateway.unipi.it <http://listgateway.unipi.it/mailman/listinfo/ntop>
>> *>* http://listgateway.unipi.it/mailman/listinfo/ntop <http://listgateway.unipi.it/mailman/listinfo/ntop>*
>>
>> _______________________________________________
>> Ntop mailing list
>> [email protected]
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>>
>>
>> _______________________________________________
>> Ntop mailing list
>> [email protected]
>> http://listgateway.unipi.it/mailman/listinfo/ntop
>>
>
>
>
> --
> Charles Hooper
> +44 7986 841714 <+44%207986%20841714>
> www.linkedin.com/in/hoopercharles/
>
>
>
>
> _______________________________________________
> Ntop mailing [email protected]://listgateway.unipi.it/mailman/listinfo/ntop
>
>
>
> _______________________________________________
> Ntop mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop
>

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop