Re: APU2 microprobe
Emanuele Faranda <[email protected]>
| Newsgroups | gmane.linux.ntop.general |
|---|---|
| Message-ID | <[email protected]> |
Hi Joe, The APU2 is not a TAP, it is a standard pc. Ntopng runs inside the APU2 itself. If you need a monitoring solution based on a TAP, you will need to do the TAP aggregation separately and then feed the aggregated traffic through a single APU2 port. Please note that you can install ntopng on any standard pc with at least one NIC. We use the APU2 for a different task, which is to intercept packets being forwarded from one network interface to another to monitor and possibly shape/drop them. This is why we have are interested in a board with multiple NICs. Regards, Emanuele On Fri, Jan 5, 2018 at 4:59 PM, [email protected] wrote: > Hello Forum > > In the interesting Sharkfest paper the pcengines board APU2 is > mentioned. > > > Is the APU2 like an aggregation TAP (2 port for the traffic and one > monitor port which forwardes the traces to ntopng? > > > Thank's a lot! > > Joe _______________________________________________ Ntop mailing list [email protected] http://listgateway.unipi.it/mailman/listinfo/ntop