Re: installation fails on Ubuntu 1604/64

Simone Mainardi <[email protected]>
Newsgroups gmane.linux.ntop.general
Message-ID <[email protected]> 
Joe,

If you want to install a packaged version simply follow the instructions at packages.ntop.org <http://packages.ntop.org/>

Simone

> On 11 Jan 2018, at 17:22, [email protected] wrote:
> 
> Hello forum,
> 
> 
> ->I am using the 1604 desktop version too and package autogen is correctly found and installable. Try to do an update first and then install it:
> ->sudo apt update
> ->sudo apt install autogen
> 
> Thank's a lot for the continued help! Unfortunately no success :-(
> 
> I am wondering if including all required software* into a single ntopng.deb would be a good idea... I think this is called static binary. E.g. i do have a deb of Google Earth which can be installed easily on different distributions, even live systems.
> 
> 
> Is it very hard to offer a *deb of ntopng with includes all dependecies?
> 
> 
> Joe
> 
> 
> On 1.12.2017 at 2:29 PM, "Simone Mainardi" <[email protected]> wrote:
> I am using the 1604 desktop version too and package autogen is correctly found and installable. Try to do an update first and then install it:
> 
> sudo apt update
> sudo apt install autogen
> 
> Very likely this is an issue connected with the use of a live cd.
> 
> Simone
> 
> On 28 Nov 2017, at 17:50, [email protected] <> wrote:
> 
> Hi Simone
> 
> -> please, check your distro and repos
> 
> ubuntu@ubuntu:~$ apt-cache show autogen
> N: Can't select versions from package 'autogen' as it is purely virtual
> N: No packages found
> 
> Thank's ! Yes, that seems to be the problem, i am using Ubuntu1604 Desktop (Live CD) and not the Server version...
> 
> Joe
> 
> 
> 
> Simone
> 
> On 20.11.2017 at 10:12 AM, "Simone Mainardi" <[email protected] <>> wrote:
> Joe,
> 
> autogen package is available on ubuntu16:
> 
> root@devel:/home/simone# apt-cache show autogen
> Package: autogen
> Priority: optional
> Section: universe/devel
> Installed-Size: 1145
> Maintainer: Ubuntu Developers <[email protected] <>>
> Original-Maintainer: Andreas Metzler <[email protected] <>>
> Architecture: amd64
> Version: 1:5.18.7-3
> Depends: guile-2.0-libs, libc6 (>= 2.14), libopts25 (>= 1:5.18.7), libxml2 (>= 2.7.4), libopts25-dev (= 1:5.18.7-3)
> Recommends: autogen-doc
> Filename: pool/universe/a/autogen/autogen_5.18.7-3_amd64.deb
> Size: 549714
> MD5sum: 120c4930ffe7578105a9689b6a2ebe78
> SHA1: 2bffee9894a22950e5bcf3f5d576e7af15b6d517
> SHA256: 15198641f60acdeac812017cdccbbf6895b3de8a22468f0b3a18534ce883247f
> Description-en: automated text file generator
>  AutoGen is a tool designed for generating program files that contain
>  repetitive text with varied substitutions. This is especially valuable if
>  there are several blocks of such text that must be kept synchronized.
>  .
>  Included with AutoGen is a tool that virtually eliminates the hassle of
>  processing options, keeping usage text up to date and so on. This tool
>  allows you to specify several program attributes, innumerable options and
>  option attributes, then it produces all the code necessary to parse and
>  handle the command line and initialization file options.
>  .
>  This package contains the development tools. libopts25-dev contains the
>  static libraries and header files. libopts25 contains the shared libraries.
>  autogen-doc contains the PostScript and HTML documentation.
> Description-md5: 0d58326715b8d7163a06b3be785ab22a
> Multi-Arch: foreign
> Homepage: http://www.gnu.org/software/autogen/ <http://www.gnu.org/software/autogen/>
> Bugs: https://bugs.launchpad.net/ubuntu/+filebug <https://bugs.launchpad.net/ubuntu/+filebug>
> Origin: Ubuntu
> 
> root@devel:/home/simone# apt-get install autogen
> Reading package lists... Done
> Building dependency tree
> Reading state information... Done
> autogen is already the newest version (1:5.18.7-3).
> 0 upgraded, 0 newly installed, 0 to remove and 24 not upgraded.
> root@devel:/home/simone# lsb_release -a
> No LSB modules are available.
> Distributor ID:	Ubuntu
> Description:	Ubuntu 16.04.3 LTS
> Release:	16.04
> Codename:	xenial
> root@devel:/home/simone#
> 
> please, check your distro and repos
> 
> 
> Simone
> 
> On 18 Nov 2017, at 14:59, [email protected] <> wrote:
> 
> Thank you very much for the help!
> 
> 
> still no luck.... Any idea hwat wrong? Thank's! Joe
> 
> 
> ubuntu@ubuntu:~$ uname -a
> 
> Linux ubuntu 4.10.0-28-generic #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
> 
> 　
> ubuntu@ubuntu:~$ sudo apt-get install build-essential git bison flex libxml2-dev libpcap-dev libtool libtool-bin rrdtool librrd-dev autoconf automake autogen
> 
> redis-server wget libsqlite3-dev libhiredis-dev libgeoip-dev libcurl4-openssl-dev libpango1.0-dev libcairo2-dev libnetfilter-queue-dev zlib1g-dev libssl-dev libcap-dev libnetfilter-conntrack-dev
> 
> 
> 
> Reading package lists... Done
> 
> Building dependency tree
> 
> Reading state information... Done
> 
> Package autogen is not available, but is referred to by another package.
> 
> This may mean that the package is missing, has been obsoleted, or
> 
> is only available from another source
> 
> However the following packages replace it:
> 
> libopts25-dev libopts25 autogen-doc
> 
> E: Package 'autogen' has no installation candidate
> 
> E: Unable to locate package redis-server
> 
> E: Unable to locate package libhiredis-dev
> 
> E: Unable to locate package libnetfilter-queue-dev
> 
> 
> 
> 
> 
> 
> On ‎14‎.‎11‎.‎2017 at 6:03 PM, "Simone Mainardi" <[email protected] <>> wrote:
> Josef,
> 
> See this error:
> Wait please...
> ./autogen.sh: line 35: autoreconf: command not found
> 
> 
> Make sure to install all the prerequisites as explained in https://github.com/ntop/ntopng/blob/dev/doc/README.compilation <https://github.com/ntop/ntopng/blob/dev/doc/README.compilation>
> 
> Regards,
> Simone
> 
> On 14 Nov 2017, at 17:26, [email protected] <> wrote:
> 
> Hello forum,
> 
> I tried to install ntopng on Ubuntu 1604/64 (Desktop) with the following two suggested installation methods (see below). 
> 
> Without success... What am i doing wrong?
> 
> 
> Thank you very much for any help!
> 
> Joe
> 
> 
> 
> -------------------------------------------------------------------------------------------------
> ubuntu@ubuntu:~/ntopng$ uname -a
> Linux ubuntu 4.10.0-28-generic #32~16.04.2-Ubuntu SMP Thu Jul 20 10:19:48 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux
> 
> 
> ubuntu@ubuntu:~$ git clone https://github.com/ntop/ntopng.git <https://github.com/ntop/ntopng.git>
> Cloning into 'ntopng'...
> remote: Counting objects: 30184, done.
> remote: Compressing objects: 100% (196/196), done.
> remote: Total 30184 (delta 198), reused 195 (delta 113), pack-reused 29875
> Receiving objects: 100% (30184/30184), 107.46 MiB | 23.37 MiB/s, done.
> Resolving deltas: 100% (22626/22626), done.
> Checking connectivity... done.
> ubuntu@ubuntu:~$ cd '/home/ubuntu/ntopng'
> 
> 
> ubuntu@ubuntu:~/ntopng$ ./autogen.sh
> Wait please...
> ./autogen.sh: line 35: autoreconf: command not found
> 
> Now run ./configure
> ubuntu@ubuntu:~/ntopng$ ./configure
> bash: ./configure: No such file or directory
> ubuntu@ubuntu:~/ntopng$ 
> 
> 
> -------------------------------------------------------------------------------------------------
> -------------------------------------------------------------------------------------------------
> ubuntu@ubuntu:~$ sudo apt-get clean all
> ubuntu@ubuntu:~$ sudo apt-get update
> 
> ubuntu@ubuntu:~$ sudo apt-get install pfring nprobe ntopng ntopng-data n2disk cento nbox
> Reading package lists... Done
> Building dependency tree       
> Reading state information... Done
> E: Unable to locate package pfring
> E: Unable to locate package nprobe
> E: Unable to locate package ntopng
> E: Unable to locate package ntopng-data
> E: Unable to locate package n2disk
> E: Unable to locate package cento
> E: Unable to locate package nbox
> 
> 
> 
> ubuntu@ubuntu:~$ sudo apt-get install ntopng
> Reading package lists... Done
> Building dependency tree       
> Reading state information... Done
> E: Unable to locate package ntopng
> ubuntu@ubuntu:~$ 
> _______________________________________________
> Ntop mailing list
> [email protected] <>
> http://listgateway.unipi.it/mailman/listinfo/ntop <http://listgateway.unipi.it/mailman/listinfo/ntop>
> _______________________________________________
> Ntop mailing list
> [email protected] <>
> http://listgateway.unipi.it/mailman/listinfo/ntop <http://listgateway.unipi.it/mailman/listinfo/ntop>
> _______________________________________________
> Ntop mailing list
> [email protected] <>
> http://listgateway.unipi.it/mailman/listinfo/ntop <http://listgateway.unipi.it/mailman/listinfo/ntop>
> _______________________________________________
> Ntop mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.