Re: How is --ignore-vlans supposed to work?

Emanuele Faranda <[email protected]> Fri, 18 Jan 2019 10:23:01 +0100
Newsgroups gmane.linux.ntop.general
Message-ID <[email protected]>
Gerard,

You may try to enable disaggregation by VLAN id. Please check out 
https://www.ntop.org/guides/ntopng/advanced_features/dynamic_interfaces_disaggregation.html 
.

If you still have traffic duplication troubles, please send us a pcap 
file with some Netflow traffic to replay in our lab. Please contact me 
privately for this and I'll send you instructions.

Regards,

Emanuele

On 1/16/19 7:41 PM, Gerard Beekmans wrote:
>
> Hi,
>
> In an attempt to fix the issues I mentioned a few days ago, I am 
> trying to validate the theory that nprobe and/or ntopng are doubling 
> up flows due to certain traffic (not all traffic) passes through our 
> equipment twice on different VLANs. When looking at the flows in 
> ntopng, I see two flows for everything. They only difference is the 
> VLAN; source IP, dest IP, packets, bytes, speed, etc are all identical 
> as expected.
>
> Some posts online suggest there are ways to ignore VLANs and I have 
> tried the following.
>
> In /etc/nprobe/nprobe.conf:
>
> -p=0/1/1/1/0/0/0
>
> In /etc/ntopng/ntopng.conf:
>
> --ignore-vlans=
>
> Perhaps the options donÂ’t function as I assumed they would. At any 
> rate, the end result is that ntopng still shows duplicate flows and 
> the list under Hosts -> VLANs continues to populate with data.
>
> Here are the entire nprobe and ntopng configuration files. I am not 
> able to spot a typo such as a missing ‘=’ that would might cause a 
> line to be interpreted as the option to the line right above it. Maybe 
> IÂ’ve overlooked something.
>
> nprobe.conf
>
> -i=none
>
> -n=none
>
> -3=2055
>
> --zmq=tcp://127.0.0.1:5556
>
> -T="@NTOPNG@"
>
> -V=9
>
> --idle-timeout=30
>
> --lifetime-timeout=600
>
> --disable-cache=
>
> --enable-ipv4-deduplication=
>
> --verbose=1
>
> -p=0/1/1/1/0/0/0
>
> --local-networks=10.0.0.0/8,172.16.0.0/12,192.168.0.0/16,208.118.68.0/24,208.118.95.34/32
>
> --local-traffic-direction=
>
> ntopng.conf
>
> -G=/var/run/ntopng.pid
>
> -i=tcp://127.0.0.1:5556
>
> --local-networks="10.0.0.0/8,172.16.0.0/12,192.168.0.0/16,208.118.68.0/24,208.118.95.34/32"
>
> --ignore-vlans=
>
> Thanks,
>
> Gerard Beekmans
> Sr. Network Engineer
> First Nations Technical Services Advisory Group Inc.
> Phone: 780-638-2739
> Fax: 780-483-8632
> Helpdesk: 1-888-999-3356
> Email: [email protected] <mailto:[email protected]>
>
> Santa Fe Plaza
> 18232 - 102 Avenue NW
> Edmonton, AB T5S 1S7
> http://www.tsag.net <http://www.tsag.net/>
>
>
> _______________________________________________
> Ntop mailing list
> [email protected]
> http://listgateway.unipi.it/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[email protected]
http://listgateway.unipi.it/mailman/listinfo/ntop