Re: Pretec GPS on an iPaq 3970 causes a "Division by zero in kernel"

Sorry for taking some time to reply.

Steven J. Hill wrote:

> Any chance you compiled with debugging symbols and did not strip?
> -Steve

Stripping symbols doesn't seem to have any effect. Still the same
error messages and crash.


David Hinds wrote:

> It would help to show more context from your log.  Like, all PCMCIA
> related messages.
> 
> Try commenting out the calls to "setserial" in /etc/pcmcia/serial.

This is the (complete ?) log, with the call to setserial commented out.
Still no changes.

familiar daemon.info cardmgr[419]: executing: 'modprobe -r serial_cs'
familiar daemon.info cardmgr[419]: socket 0: Serial or Modem
familiar daemon.info cardmgr[419]: executing: 'modprobe serial_cs'
familiar daemon.info cardmgr[419]: + Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/pcmcia_core.o
familiar daemon.info cardmgr[419]: + Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/ds.o
familiar daemon.info cardmgr[419]: + Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/serial_cs.o
familiar daemon.info cardmgr[419]: modprobe exited with status 1
familiar daemon.info cardmgr[419]: executing: 'insmod
/lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/serial_cs.o'
familiar daemon.info cardmgr[419]: + Using
/lib/modules/2.4.19-rmk6-pxa1-hh13/pcmcia/serial_cs.o
familiar daemon.info cardmgr[419]: + insmod: A module named serial_cs
already exists
familiar daemon.info cardmgr[419]: insmod exited with status 1
familiar daemon.info cardmgr[419]: executing: './serial start ttyS3'
familiar daemon.warn klogd: register_serial: port=f60003f8 irq=29
flags=1000040
familiar daemon.info klogd: ttyS03 at port 0xf60003f8 (irq = 29) is a 16550A
familiar daemon.info cardmgr[419]: + start_fn: No such file or directory

-- 
Angelo Dipierro - [email protected]
      "Life sucks" [Marvin the android]






-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf