Re: CF memory card vs CF wireless card

On Thu, Jan 01, 2004 at 09:54:00PM -0800, Sriram Neelakandan Iyer wrote:
> > 
> > It should be the same init sequence that the pcmcia
> > drivers use for all cards, nothing special.
> >
> I was asking about the socket drivers layer init
> sequence.

That was what I meant, also.

> > The only things that jump to mind, are to verify
> > that your socket driver is setting memory timings correctly. 
> 
> this is my question too .. Do i need to set different
> memory timings for reading CIS of CF+ card.. ( note
> that with the same timings i am able to read the CIS
> of the SanDisk CF Memory Card ) .. so i suppose the
> timings are correct.

The same timings should be used for all card types.  Some cards might,
however, be more sensitive to whether the timings are correct.

Do both of these cards use the same Vcc, when you test them on the
laptop?  (check with "cardctl status")

-- Dave


-------------------------------------------------------
This SF.net email is sponsored by: IBM Linux Tutorials.
Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click