Re: "timed out during reset" with calluna ATA HDD

> Please clarify.  Above, you said, this did not work.  When you have
> the "timed out" problem, does "cardctl eject" followed by "cardctl
> insert" work (i.e. give you a functioning card) or not?

I have the CS compiled into the kernel.
Booting the kernel shows

Linux version 2.4.20 (scholz@pinguin) (gcc version 2.95.3 20010111 
(prerelease/franzo/20010111)) #79 Son Feb 2 16:50:37 CET 2003
...
Linux Kernel Card Services 3.1.22
   options:  none
m8xx_pcmcia: Version 0.05, 14-Apr-2002
m8xx_pcmcia: DAB4K using SLOT_B with IRQ 13.
...
PCMCIA: Wait for SS_READY...<5>
cs: socket c0f7e800 timed out during reset.  Try increasing setup_delay.
...
Freeing unused kernel memory: 56k init
init started:  BusyBox v0.61.pre (2002.12.08-17:31+0000) multi-ca

BusyBox v0.61.pre (2002.12.08-17:31+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

and then:

~ # /sbin/cardmgr -v -f
cardmgr[46]: watching 1 sockets
cardmgr[46]: starting, version is 3.2.1
cardmgr[46]: initializing socket 0
cardmgr[46]: socket 0: ATA/IDE Fixed Disk
cardmgr[46]:   product info: "Calluna", "CT650T2", "21Feb01", "960'1-13"
cardmgr[46]:   manfid: 0x0227, 0x0000  function: 4 (fixed disk)
ide_cs: ide_register() at 0x100 & 0x10e, irq 9 failed
cardmgr[46]: get dev info on socket 0 failed: Resource temporarily unavailable

~ # cardctl ident
Socket 0:
   product info: "Calluna", "CT650T2", "21Feb01", "960'1-13"
   manfid: 0x0227, 0x0000
   function: 4 (fixed disk)

~ # cardctl eject
cardmgr[47]: shutting down socket 0
~ # cardmgr[47]: shutting down socket 0

~ # cardctl insert
PCMCIA: Wait for SS_READY...ok
cardmgr[47]: initializing socket 0
cardmgr[47]: socket 0: ATA/IDE Fixed Disk
~ # cardmgr[47]:   product info: "Calluna", "CT650T2", "21Feb01", "960'1-13"
cardmgr[47]:   manfid: 0x0227, 0x0000  function: 4 (fixed disk)
hda: Calluna Technology CT650T2, ATA DISK drive
ide0 at 0x100-0x107,0x10e on irq 9
hda: 1272096 sectors (651 MB), CHS=1262/16/63
Partition check:
  hda: hda1
ide_cs: hda: Vcc = 5.0, Vpp = 0.0
cardmgr[47]: executing: './ide start hda'
cardmgr[47]: + mount -v -t vfat /dev/hda1 /mnt/pcmcia
  hda: hda1
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
  hda: hda1

Cheers,

Steven



-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com