Re: Toradex Colibri, problem with eboot

Dne St 25. listopadu 2009 10:55:19 Dennis Semakin napsal(a):
> Hello.
> 
> Recently I have downloaded Bootloader&Image_3.4.zip with new eboot_3.4 from
>  official Toradex web-site. When I flashed eboot image on board, I have
>  seen this:
> //begin
> Toradex Windows CE Bootloader 3.4 for Colibri Built Nov 5 2009
> 
> Press [SPACE] to enter Bootloader Menu
> 
> Hardware V1.2E SerialNo: 2215423
> NAND Flash K9K: 1003 MB, SDRAM: 128 MB
> Core Voltage: 1400 mV
> CPU: PXA320 B2 806 (403), HSIO: 208, MEM: 208, DDRRAM: 260, SRAM: 312, LCD:
>  208 ERROR: ETH_SRAM Incremental test failed at 0x0000052E: (S:0x4B14,
>  I:0x4B10) ERROR: ETH_SRAM Incremental test failed at 0x0000056E:
>  (S:0x5B15, I:0x5B11) ERROR: ETH_SRAM Incremental test failed at
>  0x000005AE: (S:0x6B16, I:0x6B12) ERROR: ETH_SRAM Incremental test failed
>  at 0x000005BE: (S:0x6F16, I:0x6F06) ERROR: ETH_SRAM Incremental test
>  failed at 0x000005E4: (S:0x9179, I:0x8179) ERROR: ETH_SRAM Incremental
>  test failed at 0x00000620: (S:0x8188, I:0x8108) ERROR: ETH_SRAM
>  Incremental test failed at 0x0000063E: (S:0x8F18, I:0x8F08) ERROR:
>  ETH_SRAM Incremental test failed at 0x00000690: (S:0x41A4, I:0x4120)
>  ERROR: ETH_SRAM Incremental test failed at 0x00000698: (S:0x61A6,
>  I:0x61A2) ERROR: ETH_SRAM Incremental test failed at 0x000006A0:
>  (S:0x81A8, I:0x8128) ERROR: ETH_SRAM Incremental test failed at
>  0x000006AE: (S:0xAB1A, I:0xAB0A) ERROR: ETH_SRAM Incremental test failed
>  at 0x000006B0: (S:0xC1AC, I:0xC12C) ERROR: ETH_SRAM Incremental test
>  failed at 0x000006BA: (S:0xAE1A, I:0xAE0A) ERROR: ETH_SRAM Incremental
>  test failed at 0x000006BE: (S:0xAF1A, I:0xAF0A) ERROR: ETH_SRAM
>  Incremental test failed at 0x000006C0: (S:0x01B0, I:0x0130) ERROR:
>  ETH_SRAM Incremental test failed at 0x000006D0: (S:0x41B4, I:0x41B0)
>  ERROR: ETH_SRAM Incremental test failed at 0x000006D8: (S:0x61B6,
>  I:0x61B2) ERROR: ETH_SRAM Incremental test failed at 0x0000073A:
>  (S:0xCE1C, I:0xCE0C) ERROR: ETH_SRAM Incremental test failed at
>  0x0000073E: (S:0xCF1C, I:0xCF0C) ERROR: ETH_SRAM Incremental test failed
>  at 0x00000790: (S:0x41E4, I:0x4164) ERROR: 239 more errors
> ERROR: ETH_SRAM Random test failed at 0x0000002A: (S:0xF990, I:0xF910)
> ERROR: ETH_SRAM Random test failed at 0x00000032: (S:0x5A80, I:0x5A00)
> ERROR: ETH_SRAM Random test failed at 0x00000078: (S:0x3430, I:0x3420)
> ERROR: ETH_SRAM Random test failed at 0x00000092: (S:0x1C30, I:0x1C20)
> ERROR: ETH_SRAM Random test failed at 0x000000CC: (S:0x56E2, I:0x5662)
> ERROR: ETH_SRAM Random test failed at 0x000001A4: (S:0x2E31, I:0x2E21)
> ERROR: ETH_SRAM Random test failed at 0x000001D4: (S:0xDDAD, I:0xDD2D)
> ERROR: ETH_SRAM Random test failed at 0x000001EC: (S:0xD112, I:0xD102)
> ERROR: ETH_SRAM Random test failed at 0x000001F0: (S:0x80C8, I:0x8048)
> ERROR: ETH_SRAM Random test failed at 0x00000222: (S:0xCBE0, I:0xCB60)
> ERROR: ETH_SRAM Random test failed at 0x00000242: (S:0xB371, I:0xB361)
> ERROR: ETH_SRAM Random test failed at 0x00000262: (S:0x05C8, I:0x0548)
> ERROR: ETH_SRAM Random test failed at 0x00000348: (S:0x2584, I:0x2504)
> ERROR: ETH_SRAM Random test failed at 0x00000356: (S:0x1459, I:0x1449)
> ERROR: ETH_SRAM Random test failed at 0x00000448: (S:0x78ED, I:0x786D)
> ERROR: ETH_SRAM Random test failed at 0x00000452: (S:0x3495, I:0x3415)
> ERROR: ETH_SRAM Random test failed at 0x00000456: (S:0x70C0, I:0x7040)
> ERROR: ETH_SRAM Random test failed at 0x00000494: (S:0xF1EC, I:0xF16C)
> ERROR: ETH_SRAM Random test failed at 0x00000496: (S:0xCB32, I:0xCB22)
> ERROR: ETH_SRAM Random test failed at 0x0000049A: (S:0xC4D1, I:0xC451)
> ERROR: 301 more errors
> Could not initialize Ethernet controller
> Linux image found.
> Copying IMAGE(1951616) from FLASH(00081000) to RAM(80100000), using ECC...
> Jumping to image at 0x80100000...
> Uncompressing
>  Linux.............................................................
>  ............................................................ done, booting
>  the kernel.
> <5>[ 0.000000] Linux version 2.6.31 (den@localhost) (gcc version 4.2.4)
>  #335 Fri Nov 20 14:51:22 MSK 2009
> <4>[ 0.000000] CPU: XScale-V3 based processor [69056826] revision 6
>  (ARMv5TE) , cr=0000397frecently
> <4>[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
> <4>[ 0.000000] Machine: Toradex Colibri PXA320
> <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
> <7>[ 0.000000] On node 0 totalpages: 32768
> <7>[ 0.000000] free_area_init_node: node 0, pgdat c03bee28, node_mem_map
>  c03f 4000
> <7>[ 0.000000] Normal zone: 256 pages used for memmap
> <7>[ 0.000000] Normal zone: 0 pages reserved
> <7>[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
> <6>[ 0.000000] RO Mode clock: 60.00MHz (inactive)
> <6>[ 0.000000] Run ModeX
> ................. And so on ....................
> //end
> Did anyone meet this problem?
> Of course, I may use u-boot, but I still cannot install it on my board. :(
> By the way,
> " ... - Bootloader always sets now the MAC address for the on module
>  Ethernet controller ..." " ... - Changed Linux kernel argument (for
>  booting Linux with Eboot): The ATAG serial parameter high part contains
>  now the Toradex MAC range ID (3 highest bytes of a MAC address)." It's
>  written on Toradex web-site.

Sorry, ask Toradex, this is the windows bootloader problem, not linux problem. 
Installing the uboot is simple -- dd it to mtd0
> 
> _______________________________________________
> linux-arm mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm
>