[PATCH 0/1] arm64: dts: ti: k3-am69-aquila: Add Toradex DSI to LVDS adapter with the 10.1" V2 display

From: Leonardo Costa <[email protected]>

This patch adds the device tree overlay for the Toradex Capacitive Touch
Display 10.1" LVDS V2 through the DSI to LVDS bridge on the Aquila
Development Carrier board with the Aquila AM69 SoM.

This change depends on two other patch series, and should be applied after
them: 

- https://lore.kernel.org/linux-arm-kernel/20260623195741.495734-1-leoreis.costa-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org/T/#t

  Adds the Toradex Capacitive Touch Display 10.1" LVDS V2 overlays for the
  Verdin AM62. This series is required because it adds the panel bindings for
  the display. It is currently in linux-next.

- https://lore.kernel.org/all/20260602115123.1324474-9-ivitro-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org/

    Adds the other device tree overlays for the Aquila AM69. It is currently in
    linux-next. This is required for the changes to apply cleanly.

Leonardo Costa (1):
  arm64: dts: ti: k3-am69-aquila: Add Toradex DSI to LVDS adapter with
    the 10.1" V2 display

 arch/arm64/boot/dts/ti/Makefile               |   5 +
 ...dsi-to-lvds-v2-panel-cap-touch-10inch.dtso | 153 ++++++++++++++++++
 2 files changed, 158 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am69-aquila-dsi-to-lvds-v2-panel-cap-touch-10inch.dtso