[PATCH v9 11/22] drm/bridge: synopsys: dw-dp: Add follow-up bridge support

Add support to use USB-C connectors with the DP altmode helper code on
devicetree based platforms. To get this working there must be a DRM
bridge chain from the DisplayPort controller to the USB-C connector.
E.g. on Rockchip RK3576:

root@rk3576 # cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dw_dp_bridge_funcs
        refcount: 7
        type: [10] DP
        OF: /soc/dp@27e40000:rockchip,rk3576-dp
        ops: [0x47] detect edid hpd
bridge[1]: drm_aux_bridge_funcs
        refcount: 4
        type: [0] Unknown
        OF: /soc/phy@2b010000:rockchip,rk3576-usbdp-phy
        ops: [0x0]
bridge[2]: drm_aux_hpd_bridge_funcs
        refcount: 5
        type: [10] DP
        OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
        ops: [0x4] hpd

It's fine to fatally error out when there is no follow-up bridge
as the Rockchip Designware Displayport controller is the only
user of the bridge helper and has the port marked as required
in its binding.

Signed-off-by: Sebastian Reichel <sebastian.reichel-ZGY8ohtN/[email protected]>
---
 drivers/gpu/drm/bridge/synopsys/dw-dp.c | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-dp.c b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
index e60dab0d3b9d..577ec42c94a4 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-dp.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-dp.c
@@ -330,6 +330,8 @@ struct dw_dp {
 	struct dw_dp_plat_data plat_data;
 	u8 pixel_mode;
 
+	struct drm_bridge *next_bridge;
+
 	DECLARE_BITMAP(sdp_reg_bank, SDP_REG_BANK_SIZE);
 };
 
@@ -2049,13 +2051,31 @@ int dw_dp_bind(struct dw_dp *dp, struct drm_encoder *encoder)
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to attach bridge\n");
 
+	dp->next_bridge = of_drm_get_bridge_by_endpoint(dev->of_node, 1, 0);
+	if (IS_ERR(dp->next_bridge)) {
+		ret = PTR_ERR(dp->next_bridge);
+		return dev_err_probe(dev, ret, "failed to get follow-up bridge.\n");
+	}
+
+	ret = drm_bridge_attach(encoder, dp->next_bridge, bridge,
+				DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+	if (ret) {
+		dev_err_probe(dev, ret, "Failed to attach next bridge\n");
+		goto put_next_bridge;
+	}
+
 	return 0;
+
+put_next_bridge:
+	drm_bridge_put(dp->next_bridge);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(dw_dp_bind);
 
 void dw_dp_unbind(struct dw_dp *dp)
 {
-	/* nothing to do */
+	drm_bridge_put(dp->next_bridge);
 }
 EXPORT_SYMBOL_GPL(dw_dp_unbind);
 

-- 
2.53.0