Re: [PATCH 0/8] MMC pinmux configuration fixes
"Mendez, Judith" <[email protected]>
| Newsgroups | gmane.linux.drivers.devicetree,gmane.linux.ports.arm.kernel,gmane.linux.kernel |
|---|---|
| Message-ID | <[email protected]> |
Hi Vignesh, On 7/31/2026 5:56 AM, Vignesh Raghavendra wrote: > Hi Judith > > On 30/07/26 01:29, Judith Mendez wrote: >> This series fixes MMC pin input/output and pullup/pulldown settings >> across AM62x, AM62AX, AM62LX and AM64x boards. >> >> All patches have been tested except patch 5/8, so tested-bys >> are apreciated. >> >> Judith Mendez (8): >> arm64: dts: ti: k3-am62a: Fix MMC0_CLK register address >> arm64: dts: ti: k3-am62a: Set MMC clock pins as OUTPUT >> arm64: dts: ti: k3-am62: Set MMC clock pins as OUTPUT >> arm64: dts: ti: k3-am62l-evm: Remove unnecessary internal pullups for >> MMC0 >> arm64: dts: ti: k3-am64: Enable IO expander interrupt >> arm64: dts: ti: k3-am64: Let MMC1 clock loopback use hardware default >> arm64: dts: ti: k3-am64-sk: Disable MMC1 internal pulls >> arm64: dts: ti: k3-am642-evm: Remove unnecessary internal pullups for >> MMC1 >> > > Apart from 5/8, these patches seems like bug fixes. Please repost them > with appropriate Fixes tag. Its better to separate out 5/8 as standalone > patch. Since they were not functional fixes and were more of documentation fixes, I did not include the fixes tag, but sure, will go ahead and re-spin with fixes tag. ~ Judith > >> arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 2 +- >> .../boot/dts/ti/k3-am62-pocketbeagle2.dts | 2 +- >> .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 6 ++-- >> .../arm64/boot/dts/ti/k3-am625-sk-common.dtsi | 2 +- >> arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 5 ++-- >> arch/arm64/boot/dts/ti/k3-am62l3-evm.dts | 4 +-- >> .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 +- >> arch/arm64/boot/dts/ti/k3-am642-evm.dts | 19 +++++++++--- >> arch/arm64/boot/dts/ti/k3-am642-sk.dts | 29 +++++++++++++------ >> 9 files changed, 46 insertions(+), 25 deletions(-) >> >