[PATCH v9 10/10] arm64: dts: qcom: eliza: Add support for MM clock controllers

Add the device nodes for the multimedia clock controllers (cambistmclkcc,
camcc, videocc, gpucc) for Qualcomm Eliza SoC.

Reviewed-by: Dmitry Baryshkov <[email protected]>
Reviewed-by: Abel Vesa <[email protected]>
Signed-off-by: Taniya Das <[email protected]>
---
 arch/arm64/boot/dts/qcom/eliza.dtsi | 76 +++++++++++++++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/eliza.dtsi b/arch/arm64/boot/dts/qcom/eliza.dtsi
index 66ea4aaafd73a37303c1875361b7c03f09d58432..e8ff212c295e89bc7d418519d142f1950fbe126d 100644
--- a/arch/arm64/boot/dts/qcom/eliza.dtsi
+++ b/arch/arm64/boot/dts/qcom/eliza.dtsi
@@ -4,9 +4,13 @@
  */
 
 #include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
+#include <dt-bindings/clock/qcom,eliza-cambistmclkcc.h>
+#include <dt-bindings/clock/qcom,eliza-camcc.h>
 #include <dt-bindings/clock/qcom,eliza-dispcc.h>
 #include <dt-bindings/clock/qcom,eliza-gcc.h>
+#include <dt-bindings/clock/qcom,eliza-gpucc.h>
 #include <dt-bindings/clock/qcom,eliza-tcsr.h>
+#include <dt-bindings/clock/qcom,eliza-videocc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/gpio/gpio.h>
@@ -1787,6 +1791,24 @@ aggre2_noc: interconnect@1700000 {
 			#interconnect-cells = <2>;
 		};
 
+		cambistmclkcc: clock-controller@1760000 {
+			compatible = "qcom,eliza-cambistmclkcc";
+			reg = <0x0 0x01760000 0x0 0x6000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <&gcc GCC_CAM_BIST_MCLK_AHB_CLK>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MX>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mmss_noc: interconnect@1780000 {
 			compatible = "qcom,eliza-mmss-noc";
 			reg = <0x0 0x01780000 0x0 0x7d800>;
@@ -2893,6 +2915,60 @@ mdss_dp0_out: endpoint {
 			};
 		};
 
+		gpucc: clock-controller@3d90000 {
+			compatible = "qcom,eliza-gpucc";
+			reg = <0x0 0x03d90000 0x0 0xa000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_GPU_GPLL0_CPH_CLK_SRC>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CPH_CLK_SRC>;
+
+			power-domains = <&rpmhpd RPMHPD_MX>,
+					<&rpmhpd RPMHPD_CX>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,eliza-videocc";
+			reg = <0x0 0xaaf0000 0x0 0x10000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&bi_tcxo_ao_div2>,
+				 <&sleep_clk>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MX>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ade0000 {
+			compatible = "qcom,eliza-camcc";
+			reg = <0x0 0x0ade0000 0x0 0x20000>;
+
+			clocks = <&bi_tcxo_div2>,
+				 <&sleep_clk>,
+				 <&gcc GCC_CAMERA_AHB_CLK>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>,
+					<&rpmhpd RPMHPD_MX>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,eliza-dispcc";
 			reg = <0x0 0x0af00000 0x0 0x20000>;

-- 
2.34.1