Re: [PATCH net] net: phy: mediatek: fix TX blink masks using the RX bits

Hello:

This patch was applied to netdev/net.git (main)
by Paolo Abeni <[email protected]>:

On Tue,  4 Aug 2026 15:35:11 +0400 you wrote:
> MTK_GPHY_LED_TX_BLINK_SET and MTK_2P5GPHY_LED_TX_BLINK_SET are built
> from the RX blink bits instead of the TX ones, so both TX masks are
> identical to their RX counterparts. The TX bits they should be using,
> MTK_PHY_LED_BLINK_{10,100,1000,2500}TX, are otherwise only referenced
> by the per-speed branch of mtk_phy_led_hw_ctrl_set().
> 
> A TX trigger selected without a link trigger therefore programs the RX
> blink bits, and the LED blinks on received traffic. The masks are also
> used to decode the blink register in mtk_phy_led_hw_ctrl_get(), which
> as a result cannot tell the two triggers apart: an RX-only
> configuration reads back as RX and TX, and a TX-only configuration
> reads back as neither.
> 
> [...]

Here is the summary with links:
  - [net] net: phy: mediatek: fix TX blink masks using the RX bits
    https://git.kernel.org/netdev/net/c/f684c514f796

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html