Re: [PATCH v3 1/4] dt-bindings: crypto: rockchip: Add RK356x/RK3588 crypto engine binding

On Sun, Aug 16, 2026 at 08:39:44PM +0100, Dawid Olesinski wrote:
> Add a YAML device tree binding for the Rockchip second-generation (V2)
> cryptographic hardware accelerator present on the RK3568 and RK3588 SoCs.
> 
> The IP block exposes AES-ECB, AES-CBC, AES-XTS block ciphers, SHA-1,
> SHA-224, SHA-256, SHA-384, SHA-512, MD5, and SM3 hash algorithms, each
> with a hardware DMA engine controlled via linked-list descriptors.
> 
> The binding covers two compatible strings:
> 
>   - rockchip,rk3568-crypto: clocks and resets are driven directly by the
>     non-secure CRU (accessible to Linux at EL1).
>   - rockchip,rk3588-crypto: clocks and resets live in SECURECRU, a
>     register bank sandboxed to TrustZone. Linux must request them through
>     the ARM SCMI firmware interface (scmi_clk / scmi_reset), as direct
>     MMIO access to SECURECRU from EL1 triggers a bus fault.
> 
> Co-developed-by: Corentin Labbe <clabbe-rdvid1DuHRBWk0Htik3J/[email protected]>
> Signed-off-by: Corentin Labbe <clabbe-rdvid1DuHRBWk0Htik3J/[email protected]>
> Signed-off-by: Dawid Olesinski <[email protected]>
> Tested-by: Diederik de Haas <diederik-+z4YHiVm8CYqDJ6do+/[email protected]>  # Quartz64-B,

Nope. Not possible. Drop non-applicable tags.

> NanoPi R5S, NanoPC-T6 LTS
> ---
>  .../crypto/rockchip,rk3588-crypto.yaml        | 83 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +
>  2 files changed, 85 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/crypto/rockchip,rk3588-crypto.yaml
> 
> diff --git a/Documentation/devicetree/bindings/crypto/rockchip,rk3588-crypto.yaml b/Documentation/devicetree/bindings/crypto/rockchip,rk3588-crypto.yaml
> new file mode 100644
> index 000000000000..32d241c19453
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/crypto/rockchip,rk3588-crypto.yaml

Fallback should be used as the filename.

...

> +  clocks:
> +    items:
> +      - description: Core clock for the crypto IP internal logic
> +      - description: AXI interconnect clock interface
> +      - description: AHB interface clock
> +
> +  clock-names:
> +    items:
> +      - const: core
> +      - const: aclk
> +      - const: hclk
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 3
> +
> +  reset-names:
> +    minItems: 1

Why is this flexible?

> +    items:
> +      - const: core
> +      - const: aclk
> +      - const: hclk
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names

Binding looks the same as
Documentation/devicetree/bindings/crypto/rockchip,rk3288-crypto.yaml.
Why it cannot be added there?

Aren't the clocks and resets basically the same as in that file?

Best regards,
Krzysztof