Re: Building a SD card adapter

Hello Rob,

The SD card receptacle that I have is reversed from the one you used
-- the SD card goes in upside down -- so I drew my own circuit board
[1]. I've built the board, but so far it doesn't work. If you had a
moment, would you mind looking at my circuit? I'm almost positive
there's nothing wrong with it, but I'd appreciate another pair of
eyes.

Thanks,
Shaun

[1] http://www.sfu.ca/~sdj/tmp/gcsd.png

On Mar 22, 2005 3:37 PM, Rob Reilink <[email protected]> wrote:
> I've made my own pcb, layout at
> http://home.student.utwente.nl/r.reilink/files/gcnsd8.pdf
> If you can find a friend who can make the pcb for you, that's fine, but
> I wouldn't recommend to get an entire pcb etching setup just for this
> card. If you want to use your mem card, see if you can use a knife to
> get the soldermask off the pcb to get to the copper trace and solder a
> (thin) wire to it.
> 
> Another option which I used for testing: solder it to your cube.
> 
> Rob


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click