Re: Re: Help with J5600 (Model: 9000/785/J5600)

Michael Greene wrote:
> Kyle McMartin wrote:
>> On Thu, Jan 25, 2007 at 06:52:39PM -0500, Michael Greene wrote:
>>> I am trying to get any version of hppa linux running on an old J5600, 
>>> <snip>
>>> SBA found Astro 2.1 at 0xfed00000
>>> Elroy version TR4.0 (0x5) found at 0xfed30000
>>> PCI: Enabled native mode for NS87415 (pif=0x8f)
>>> iosapic: 0xfed30800 : no IRT entry for slot 12, pin 1
>>> iosapic: no IRTE for 0000:00:0c.0 (IRQ not connected?)
>>> iosapic: 0xfed30800 : no IRT entry for slot 13, pin 1
>>> iosapic: no IRTE for 0000:00:0d.0 (IRQ not connected?)
>>> iosapic: 0xfed30800 : no IRT entry for slot 14, pin 4
>>> iosapic: no IRTE for 0000:00:0e.2 (IRQ not connected?)
>>> iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1
>>> iosapic: no IRTE for 0000:00:0f.0 (IRQ not connected?)
>>> iosapic: 0xfed30800 : no IRT entry for slot 15, pin 1
>>> iosapic: no IRTE for 0000:00:0f.1 (IRQ not connected?)
>>> Elroy version TR4.0 (0x5) found at 0xfed32000
>>
>> Do you have any PCI cards in this machine? Something is badly
>> broken in the firmware.
> 
> No PCI cards that I know of... think the firmware got trashed?
> 
> Mike
> 

I found the version 5 firmware for j5600 and if I can make a tape then I 
will try to install the update to see if it helps.

Mike