[PATCH 26/39] ACPI: Add post_eject to struct acpi_scan_handler for cpu hotplug

Russell King (Oracle) <[email protected]>
Newsgroups gmane.linux.acpi.devel,gmane.linux.power-management.general,gmane.linux.kernel.cross-arch,gmane.linux.kernel,gmane.linux.ports.arm.kernel,gmane.linux.ports.riscv,gmane.linux.documentation,gmane.linux.ports.ia64,gmane.linux.ports.parisc
Message-ID <[email protected]>
From: James Morse <[email protected]>

struct acpi_scan_handler has a detach callback that is used to remove
a driver when a bus is changed. When interacting with an eject-request,
the detach callback is called before _EJ0.

This means the ACPI processor driver can't use _STA to determine if a
CPU has been made not-present, or some of the other _STA bits have been
changed. acpi_processor_remove() needs to know the value of _STA after
_EJ0 has been called.

Add a post_eject callback to struct acpi_scan_handler. This is called
after acpi_scan_hot_remove() has successfully called _EJ0. Because
acpi_bus_trim_one() also clears the handler pointer, it needs to be
told if the caller will go on to call acpi_bus_post_eject(), so
that acpi_device_clear_enumerated() and clearing the handler pointer
can be deferred. The existing not-used pointer is used for this.

Signed-off-by: James Morse <[email protected]>
Reviewed-by: Joanthan Cameron <[email protected]>
---
 drivers/acpi/acpi_processor.c |  4 +--
 drivers/acpi/scan.c           | 52 ++++++++++++++++++++++++++++++-----
 include/acpi/acpi_bus.h       |  1 +
 3 files changed, 48 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index 26e3efb74614..b6f5005985c3 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -459,7 +459,7 @@ static int acpi_processor_add(struct acpi_device *device,
 
 #ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU
 /* Removal */
-static void acpi_processor_remove(struct acpi_device *device)
+static void acpi_processor_post_eject(struct acpi_device *device)
 {
 	struct acpi_processor *pr;
 
@@ -627,7 +627,7 @@ static struct acpi_scan_handler processor_handler = {
 	.ids = processor_device_ids,
 	.attach = acpi_processor_add,
 #ifdef CONFIG_ACPI_HOTPLUG_PRESENT_CPU
-	.detach = acpi_processor_remove,
+	.post_eject = acpi_processor_post_eject,
 #endif
 	.hotplug = {
 		.enabled = true,
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 4343888c76d5..adfd24f4d00c 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -244,18 +244,28 @@ static int acpi_scan_try_to_offline(struct acpi_device *device)
 	return 0;
 }
 
-static int acpi_bus_trim_one(struct acpi_device *adev, void *not_used)
+/**
+ * acpi_bus_trim_one() - Detach scan handlers and drivers from ACPI device
+ *                       objects.
+ * @adev:       Root of the ACPI namespace scope to walk.
+ * @eject:      Pointer to a bool that indicates if this was due to an
+ *              eject-request.
+ *
+ * Must be called under acpi_scan_lock.
+ * If @eject points to true, clearing the device enumeration is deferred until
+ * acpi_bus_post_eject() is called.
+ */
+static int acpi_bus_trim_one(struct acpi_device *adev, void *eject)
 {
 	struct acpi_scan_handler *handler = adev->handler;
+	bool is_eject = *(bool *)eject;
 
-	acpi_dev_for_each_child_reverse(adev, acpi_bus_trim_one, NULL);
+	acpi_dev_for_each_child_reverse(adev, acpi_bus_trim_one, eject);
 
 	adev->flags.match_driver = false;
 	if (handler) {
 		if (handler->detach)
 			handler->detach(adev);
-
-		adev->handler = NULL;
 	} else {
 		device_release_driver(&adev->dev);
 	}
@@ -265,7 +275,12 @@ static int acpi_bus_trim_one(struct acpi_device *adev, void *not_used)
 	 */
 	acpi_device_set_power(adev, ACPI_STATE_D3_COLD);
 	adev->flags.initialized = false;
-	acpi_device_clear_enumerated(adev);
+
+	/* For eject this is deferred to acpi_bus_post_eject() */
+	if (!is_eject) {
+		adev->handler = NULL;
+		acpi_device_clear_enumerated(adev);
+	}
 
 	return 0;
 }
@@ -278,15 +293,36 @@ static int acpi_bus_trim_one(struct acpi_device *adev, void *not_used)
  */
 void acpi_bus_trim(struct acpi_device *adev)
 {
-	acpi_bus_trim_one(adev, NULL);
+	bool eject = false;
+
+	acpi_bus_trim_one(adev, &eject);
 }
 EXPORT_SYMBOL_GPL(acpi_bus_trim);
 
+static int acpi_bus_post_eject(struct acpi_device *adev, void *not_used)
+{
+	struct acpi_scan_handler *handler = adev->handler;
+
+	acpi_dev_for_each_child_reverse(adev, acpi_bus_post_eject, NULL);
+
+	if (handler) {
+		if (handler->post_eject)
+			handler->post_eject(adev);
+
+		adev->handler = NULL;
+	}
+
+	acpi_device_clear_enumerated(adev);
+
+	return 0;
+}
+
 static int acpi_scan_hot_remove(struct acpi_device *device)
 {
 	acpi_handle handle = device->handle;
 	unsigned long long sta;
 	acpi_status status;
+	bool eject = true;
 
 	if (device->handler && device->handler->hotplug.demand_offline) {
 		if (!acpi_scan_is_offline(device, true))
@@ -299,7 +335,7 @@ static int acpi_scan_hot_remove(struct acpi_device *device)
 
 	acpi_handle_debug(handle, "Ejecting\n");
 
-	acpi_bus_trim(device);
+	acpi_bus_trim_one(device, &eject);
 
 	acpi_evaluate_lck(handle, 0);
 	/*
@@ -322,6 +358,8 @@ static int acpi_scan_hot_remove(struct acpi_device *device)
 	} else if (sta & ACPI_STA_DEVICE_ENABLED) {
 		acpi_handle_warn(handle,
 			"Eject incomplete - status 0x%llx\n", sta);
+	} else {
+		acpi_bus_post_eject(device, NULL);
 	}
 
 	return 0;
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 254685085c82..1b7e1acf925b 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -127,6 +127,7 @@ struct acpi_scan_handler {
 	bool (*match)(const char *idstr, const struct acpi_device_id **matchid);
 	int (*attach)(struct acpi_device *dev, const struct acpi_device_id *id);
 	void (*detach)(struct acpi_device *dev);
+	void (*post_eject)(struct acpi_device *dev);
 	void (*bind)(struct device *phys_dev);
 	void (*unbind)(struct device *phys_dev);
 	struct acpi_hotplug_profile hotplug;
-- 
2.30.2
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.