Re: [PATCH 1/4] dt-bindings: sound: fsl,imx-asrc: update port binding to support multiple pairs

On Sat, Aug 1, 2026 at 6:59=E2=80=AFAM Rob Herring <[email protected]> wrote:
>
> On Mon, Jul 20, 2026 at 05:54:47PM +0800, [email protected] wrote=
:
> > From: Shengjiu Wang <[email protected]>
> >
> > The i.MX ASRC hardware supports up to three conversion pairs (A, B, C).
> > The existing binding exposed only a single generic audio-graph port,
> > which cannot represent the individual pair endpoints.
> >
> > Add a ports container that enumerates three named sub-ports:
> >   port@0 -- pair A
> >   port@1 -- pair B
> >   port@2 -- pair C
> >
> > Each sub-port references audio-graph-port.yaml as before.
> >
> > For backwards compatibility, keep the old single port property but mark
> > it deprecated. A schema constraint (not: required: [port, ports]) ensur=
es
> > that both forms cannot be used at the same time. Update the examples to
> > show both the new ports form and the deprecated port form.
> >
> > No existing upstream DTS file for fsl,imx-asrc uses the previously
> > documented single 'port' node, so this change does not break any
> > in-tree device tree.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > ---
> >  .../bindings/sound/fsl,imx-asrc.yaml          | 78 +++++++++++++++++++
> >  1 file changed, 78 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml =
b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
> > index 608defc93c1e..18d252722aa8 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
> > +++ b/Documentation/devicetree/bindings/sound/fsl,imx-asrc.yaml
> > @@ -78,9 +78,29 @@ properties:
> >    power-domains:
> >      maxItems: 1
> >
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +    properties:
> > +      port@0:
> > +        $ref: audio-graph-port.yaml#
> > +        unevaluatedProperties: false
> > +        description: port for pair A
> > +
> > +      port@1:
> > +        $ref: audio-graph-port.yaml#
> > +        unevaluatedProperties: false
> > +        description: port for pair B
> > +
> > +      port@2:
> > +        $ref: audio-graph-port.yaml#
> > +        unevaluatedProperties: false
> > +        description: port for pair C
> > +
> >    port:
> >      $ref: audio-graph-port.yaml#
> >      unevaluatedProperties: false
> > +    deprecated: true
> > +    description: deprecated, use ports instead
> >
> >    fsl,asrc-rate:
> >      $ref: /schemas/types.yaml#/definitions/uint32
> > @@ -125,6 +145,10 @@ required:
> >    - fsl,asrc-width
> >
> >  allOf:
> > +  - not:
> > +      required:
> > +        - port
> > +        - ports
> >    - $ref: dai-common.yaml#
> >    - if:
> >        properties:
> > @@ -188,3 +212,57 @@ examples:
> >              };
> >         };
> >      };
> > +
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/clock/imx6qdl-clock.h>
> > +    asrc1: asrc@2034000 {
>
> Drop unused label.
>
> Presumably the existing example uses the deprecated 'port'. If so, just
> modify it to use ports and drop the deprecated part.

Ok, I will update it in v3.

best regards
shengjiu Wang