Re: Sound problems with MOL on an OldWorld G3
Marc Coevoet <[email protected]> Wed, 25 Jan 2006 20:25:28 +0100
| Newsgroups | gmane.linux.ports.ppc.mol.general |
|---|---|
| Message-ID | <[email protected]> |
there are 3 revs, there is one bogus, at least .. y're lucky Op 25-jan-06 om 17:58 heeft Jose Medeiros het volgende geschreven: > Sounds like you have a hardware problem. I also have an older > Macintosh " Biege g3 300 mhz " and it works fine with Mac Os 10.3 ands > 10.4, however I used Xpostfacto to intsall it. > http://eshop.macsales.com/OSXCenter/XPostFacto/ > > You also failed to mention if the sound card is working under OS 9, > does it work correctly with OS 9? > > Jose :-) > > > On 1/25/06, Risto Suominen <[email protected]> wrote: >> Hello all, >> >> I installed MOL 0.9.70 on my OldWorld PowerMac G3. It seems usable, >> but the sound doesn't work. I run Ubuntu 4.10 with kernel 2.6.8.1, and >> I compiled MOL from source. The problems are dependent on the guest >> operating system: >> >> To be able to get Mac OS 9 to boot, I had to extract the ROM from >> another machine, a PowerMac 7600. With it, and oftree.8500, it boots >> with 'startmol --oldworld'. I put the Mol-audio extension to the >> Extensions folder. Maybe this was wrong? Is it only for NewWorld >> machines? Because when I start the Sound Control Panel, I get an error >> message on the linux terminal window, something like: Cannot find >> mol-audio node. I assume this refers to an oftree node. And: Cannot >> route interrupt for mol-audio. I don't remember the exact words. >> >> With OS X 10.2 I'm somehow closer to success. Maybe the machine is >> just too slow (233 MHz). I tried to produce sound by playing an MP3 in >> iTunes. When about 3 min. of a total of 3:15 has gone, unexpectedly, >> the sound starts, first in small pieces, and getting better. >> >> In both cases, I get no startboing. I tried with different versions, >> with and without OSS and ALSA, when compiling MOL. I have both ALSA >> modules and ALSA-OSS compatibility layer loaded in the kernel. Am I >> alone trying to run MOL on an OldWorld Mac? Any help and ideas are >> welcome. >> >> Regards, >> Risto Suominen >> _______________________________________________ >> mol-general mailing list >> [email protected] >> http://lists.maconlinux.org/mailman/listinfo/mol-general >> > _______________________________________________ > mol-general mailing list > [email protected] > http://lists.maconlinux.org/mailman/listinfo/mol-general >