[PATCH v6] sh: avoid using IRQ0 on SH3/4

IRQ0 is no longer returned by platform_get_irq() and its ilk -- they now
return -EINVAL instead.  However, the kernel code supporting SH3/4 based
SoCs still maps the IRQ #s starting at 0 -- modify that code to start the
IRQ #s from 16 instead.

The patch should mostly affect the AP-SH4A-3A/AP-SH4AD-0A boards as they
indeed are using IRQ0 for the SMSC911x compatible Ethernet chip...

Fixes: ce753ad1549c ("platform: finally disallow IRQ0 in platform_get_irq() and its ilk")
Signed-off-by: Sergey Shtylyov <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Tested-by: John Paul Adrian Glaubitz <[email protected]>

---
The patch is against Linus Torvalds' 'linux.git' repo.

Changes in version 6:
- fixed up inconsistencies and did some rewording in the patch description.

Changes in version 5:
- updated the patch description and the "Fixes:" tag as the patch disallowing
  the use of IRQ0 was merged meanwhile.

Changes in version 4:
- fixed up the off-chip base IRQ #s for the Dreamcast/Highlander/R2D/SE7724
  boards.

Changes in version 3:
- added an appropriate Fixes: tag and added a passage about it to the patch
  description;
- added actual cases of the boards using IRQ0 to the patch description;
- added Geert Uytterhoeven's and John Paul Adrian Glaubitz's tags;
- updated the link to point to the version 2 of the patch.

Changes in version 2:
- changed cmp/ge to cmp/hs in the assembly code.

 arch/sh/include/mach-common/mach/highlander.h |    2 +-
 arch/sh/include/mach-common/mach/r2d.h        |    2 +-
 arch/sh/include/mach-dreamcast/mach/sysasic.h |    2 +-
 arch/sh/include/mach-se/mach/se7724.h         |    2 +-
 arch/sh/kernel/cpu/sh3/entry.S                |    4 ++--
 include/linux/sh_intc.h                       |    6 +++---
 6 files changed, 9 insertions(+), 9 deletions(-)

Index: linux/arch/sh/include/mach-common/mach/highlander.h
===================================================================
--- linux.orig/arch/sh/include/mach-common/mach/highlander.h
+++ linux/arch/sh/include/mach-common/mach/highlander.h
@@ -176,7 +176,7 @@
 #define IVDR_CK_ON	4		/* iVDR Clock ON */
 #endif
 
-#define HL_FPGA_IRQ_BASE	200
+#define HL_FPGA_IRQ_BASE	(200 + 16)
 #define HL_NR_IRL		15
 
 #define IRQ_AX88796		(HL_FPGA_IRQ_BASE + 0)
Index: linux/arch/sh/include/mach-common/mach/r2d.h
===================================================================
--- linux.orig/arch/sh/include/mach-common/mach/r2d.h
+++ linux/arch/sh/include/mach-common/mach/r2d.h
@@ -47,7 +47,7 @@
 
 #define IRLCNTR1	(PA_BCR + 0)	/* Interrupt Control Register1 */
 
-#define R2D_FPGA_IRQ_BASE	100
+#define R2D_FPGA_IRQ_BASE	(100 + 16)
 
 #define IRQ_VOYAGER		(R2D_FPGA_IRQ_BASE + 0)
 #define IRQ_EXT			(R2D_FPGA_IRQ_BASE + 1)
Index: linux/arch/sh/include/mach-dreamcast/mach/sysasic.h
===================================================================
--- linux.orig/arch/sh/include/mach-dreamcast/mach/sysasic.h
+++ linux/arch/sh/include/mach-dreamcast/mach/sysasic.h
@@ -22,7 +22,7 @@
    takes.
 */
 
-#define HW_EVENT_IRQ_BASE  48
+#define HW_EVENT_IRQ_BASE  (48 + 16)
 
 /* IRQ 13 */
 #define HW_EVENT_VSYNC     (HW_EVENT_IRQ_BASE +  5) /* VSync */
Index: linux/arch/sh/include/mach-se/mach/se7724.h
===================================================================
--- linux.orig/arch/sh/include/mach-se/mach/se7724.h
+++ linux/arch/sh/include/mach-se/mach/se7724.h
@@ -37,7 +37,7 @@
 #define IRQ2_IRQ        evt2irq(0x640)
 
 /* Bits in IRQ012 registers */
-#define SE7724_FPGA_IRQ_BASE	220
+#define SE7724_FPGA_IRQ_BASE	(220 + 16)
 
 /* IRQ0 */
 #define IRQ0_BASE	SE7724_FPGA_IRQ_BASE
Index: linux/arch/sh/kernel/cpu/sh3/entry.S
===================================================================
--- linux.orig/arch/sh/kernel/cpu/sh3/entry.S
+++ linux/arch/sh/kernel/cpu/sh3/entry.S
@@ -470,9 +470,9 @@ ENTRY(handle_interrupt)
 	mov	r4, r0		! save vector->jmp table offset for later
 
 	shlr2	r4		! vector to IRQ# conversion
-	add	#-0x10, r4
 
-	cmp/pz	r4		! is it a valid IRQ?
+	mov	#0x10, r5
+	cmp/hs	r5, r4		! is it a valid IRQ?
 	bt	10f
 
 	/*
Index: linux/include/linux/sh_intc.h
===================================================================
--- linux.orig/include/linux/sh_intc.h
+++ linux/include/linux/sh_intc.h
@@ -13,9 +13,9 @@
 /*
  * Convert back and forth between INTEVT and IRQ values.
  */
-#ifdef CONFIG_CPU_HAS_INTEVT
-#define evt2irq(evt)		(((evt) >> 5) - 16)
-#define irq2evt(irq)		(((irq) + 16) << 5)
+#ifdef CONFIG_CPU_HAS_INTEVT	/* Avoid IRQ0 (invalid for platform devices) */
+#define evt2irq(evt)		((evt) >> 5)
+#define irq2evt(irq)		((irq) << 5)
 #else
 #define evt2irq(evt)		(evt)
 #define irq2evt(irq)		(irq)