[PATCH v3 26/38] fbdev/sh7760fb: Output messages with fb_dbg()

Thomas Zimmermann <[email protected]>
Newsgroups gmane.linux.ports.arm.omap,gmane.comp.video.dri.devel,gmane.linux.ports.sh.devel,gmane.linux.kernel
Message-ID <[email protected]>
Fix cases were output helpers are called with struct fb_info.dev.
Use fb_dbg() instead. Prepares fbdev for making struct fb_info.dev
optional.

Signed-off-by: Thomas Zimmermann <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
 drivers/video/fbdev/sh7760fb.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/drivers/video/fbdev/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
index a2946f06d579e..65e2c71cf5b51 100644
--- a/drivers/video/fbdev/sh7760fb.c
+++ b/drivers/video/fbdev/sh7760fb.c
@@ -207,7 +207,7 @@ static int sh7760fb_set_par(struct fb_info *info)
 
 	/* rotate only works with xres <= 320 */
 	if (par->rot && (vm->xres > 320)) {
-		dev_dbg(info->dev, "rotation disabled due to display size\n");
+		fb_dbg(info, "rotation disabled due to display size\n");
 		par->rot = 0;
 	}
 
@@ -226,7 +226,7 @@ static int sh7760fb_set_par(struct fb_info *info)
 	if (ret)
 		return ret;
 
-	dev_dbg(info->dev, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
+	fb_dbg(info, "%dx%d %dbpp %s (orientation %s)\n", hdcn,
 		vdln, bpp, gray ? "grayscale" : "color",
 		par->rot ? "rotated" : "normal");
 
@@ -306,7 +306,7 @@ static int sh7760fb_set_par(struct fb_info *info)
 	if (((ldmtr & 0x003f) >= LDMTR_DSTN_MONO_8) &&
 	    ((ldmtr & 0x003f) <= LDMTR_DSTN_COLOR_16)) {
 
-		dev_dbg(info->dev, " ***** DSTN untested! *****\n");
+		fb_dbg(info, " ***** DSTN untested! *****\n");
 
 		dstn_off = stride;
 		if (par->rot)
@@ -326,17 +326,17 @@ static int sh7760fb_set_par(struct fb_info *info)
 
 	sh7760fb_blank(FB_BLANK_UNBLANK, info);	/* panel on! */
 
-	dev_dbg(info->dev, "hdcn  : %6d htcn  : %6d\n", hdcn, htcn);
-	dev_dbg(info->dev, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
-	dev_dbg(info->dev, "vdln  : %6d vtln  : %6d\n", vdln, vtln);
-	dev_dbg(info->dev, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
-	dev_dbg(info->dev, "clksrc: %6d clkdiv: %6d\n",
+	fb_dbg(info, "hdcn  : %6d htcn  : %6d\n", hdcn, htcn);
+	fb_dbg(info, "hsynw : %6d hsynp : %6d\n", hsynw, hsynp);
+	fb_dbg(info, "vdln  : %6d vtln  : %6d\n", vdln, vtln);
+	fb_dbg(info, "vsynw : %6d vsynp : %6d\n", vsynw, vsynp);
+	fb_dbg(info, "clksrc: %6d clkdiv: %6d\n",
 		(par->pd->ldickr >> 12) & 3, par->pd->ldickr & 0x1f);
-	dev_dbg(info->dev, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
+	fb_dbg(info, "ldpmmr: 0x%04x ldpspr: 0x%04x\n", par->pd->ldpmmr,
 		par->pd->ldpspr);
-	dev_dbg(info->dev, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
-	dev_dbg(info->dev, "ldlaor: %ld\n", stride);
-	dev_dbg(info->dev, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
+	fb_dbg(info, "ldmtr : 0x%04x lddfr : 0x%04x\n", ldmtr, lddfr);
+	fb_dbg(info, "ldlaor: %ld\n", stride);
+	fb_dbg(info, "ldsaru: 0x%08lx ldsarl: 0x%08lx\n", sbase, ldsarl);
 
 	return 0;
 }
@@ -401,7 +401,7 @@ static int sh7760fb_alloc_mem(struct fb_info *info)
 	} else if (bpp > 8)
 		vram *= 2;
 	if ((vram < 1) || (vram > 1024 * 2048)) {
-		dev_dbg(info->dev, "too much VRAM required. Check settings\n");
+		fb_dbg(info, "too much VRAM required. Check settings\n");
 		return -ENODEV;
 	}
 
-- 
2.41.0
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.