Re: [PATCH v2] sh: hd64461: fix virq offsets
John Paul Adrian Glaubitz <[email protected]>
| Newsgroups | gmane.linux.kernel,gmane.linux.ports.sh.devel |
|---|---|
| Message-ID | <787c97736d68dcb6968efc67d6a242b46ab74cf9.camel@physik.fu-berlin.de> |
On Tue, 2023-07-11 at 01:31 +0200, Artur Rojek wrote:
> A recent change to start counting SuperH IRQ #s from 16 breaks support
> for the Hitachi HD64461 companion chip.
>
> Move the offchip IRQ base and HD64461 IRQ # by 16 in order to
> accommodate for the new virq numbering rules.
>
> Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")
> Signed-off-by: Artur Rojek <[email protected]>
> ---
>
> v2: Make the IRQ base offset an explicit (64 + 16), as per review.
>
> arch/sh/cchips/Kconfig | 4 ++--
> arch/sh/include/asm/hd64461.h | 2 +-
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/sh/cchips/Kconfig b/arch/sh/cchips/Kconfig
> index efde2edb5627..9659a0bc58de 100644
> --- a/arch/sh/cchips/Kconfig
> +++ b/arch/sh/cchips/Kconfig
> @@ -29,9 +29,9 @@ endchoice
> config HD64461_IRQ
> int "HD64461 IRQ"
> depends on HD64461
> - default "36"
> + default "52"
> help
> - The default setting of the HD64461 IRQ is 36.
> + The default setting of the HD64461 IRQ is 52.
>
> Do not change this unless you know what you are doing.
>
> diff --git a/arch/sh/include/asm/hd64461.h b/arch/sh/include/asm/hd64461.h
> index afb24cb034b1..d2c485fa333b 100644
> --- a/arch/sh/include/asm/hd64461.h
> +++ b/arch/sh/include/asm/hd64461.h
> @@ -229,7 +229,7 @@
> #define HD64461_NIMR HD64461_IO_OFFSET(0x5002)
>
> #define HD64461_IRQBASE OFFCHIP_IRQ_BASE
> -#define OFFCHIP_IRQ_BASE 64
> +#define OFFCHIP_IRQ_BASE (64 + 16)
> #define HD64461_IRQ_NUM 16
>
> #define HD64461_IRQ_UART (HD64461_IRQBASE+5)
Applied to my for-linus branch.
Thanks,
Adrian
--
.''`. John Paul Adrian Glaubitz
: :' : Debian Developer
`. `' Physicist
`- GPG: 62FF 8A75 84E0 2956 9546 0006 7426 3B37 F5B5 F913