[RFC PATCH 03/12] sh: SH4 OF support.

Yoshinori Sato <[email protected]>
Newsgroups gmane.linux.ports.sh.devel
Message-ID <4a138cf1ff14ff6166a66851db7476096fa3f009.1693384846.git.ysato@users.sourceforge.jp>
- switch generic framework in clock / PCI.

Signed-off-by: Yoshinori Sato <[email protected]>
---
 arch/sh/drivers/Makefile        |  2 ++
 arch/sh/include/asm/io.h        | 10 ++++++++++
 arch/sh/include/asm/pci.h       |  4 ++++
 arch/sh/kernel/cpu/Makefile     |  8 ++++++--
 arch/sh/kernel/cpu/clock.c      |  3 ++-
 arch/sh/kernel/cpu/sh4/Makefile |  2 ++
 6 files changed, 26 insertions(+), 3 deletions(-)

diff --git a/arch/sh/drivers/Makefile b/arch/sh/drivers/Makefile
index 56b0acace6e7..eacbcefb26b2 100644
--- a/arch/sh/drivers/Makefile
+++ b/arch/sh/drivers/Makefile
@@ -5,7 +5,9 @@
 
 obj-y		+= dma/ platform_early.o
 
+ifndef CONFIG_SH_DEVICE_TREE
 obj-$(CONFIG_PCI)		+= pci/
+endif
 obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_PUSH_SWITCH)	+= push-switch.o
 obj-$(CONFIG_HEARTBEAT)		+= heartbeat.o
diff --git a/arch/sh/include/asm/io.h b/arch/sh/include/asm/io.h
index d8f3537ef57f..d14adf034780 100644
--- a/arch/sh/include/asm/io.h
+++ b/arch/sh/include/asm/io.h
@@ -292,4 +292,14 @@ static inline void iounmap(volatile void __iomem *addr) { }
 int valid_phys_addr_range(phys_addr_t addr, size_t size);
 int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
 
+
+#ifdef __KERNEL__
+#define PCI_IOBASE	0xfe240000UL
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET	PCI_IOBASE
+#define PIO_MASK	0x3ffffUL
+#define PIO_RESERVED	0x40000UL
+#endif /* __KERNEL__ */
+
 #endif /* __ASM_SH_IO_H */
diff --git a/arch/sh/include/asm/pci.h b/arch/sh/include/asm/pci.h
index 54c30126ea17..92b3bd604319 100644
--- a/arch/sh/include/asm/pci.h
+++ b/arch/sh/include/asm/pci.h
@@ -2,6 +2,7 @@
 #ifndef __ASM_SH_PCI_H
 #define __ASM_SH_PCI_H
 
+#ifndef CONFIG_SH_DEVICE_TREE
 /* Can be used to override the logic in pci_scan_bus for skipping
    already-configured bus numbers - to be used for buggy BIOSes
    or architectures with incomplete PCI setup by the loader */
@@ -88,4 +89,7 @@ static inline int pci_proc_domain(struct pci_bus *bus)
 	return hose->need_domain_info;
 }
 
+#else /* CONFIG_SH_DEVICE_TREE */
+#include <asm-generic/pci.h>
+#endif
 #endif /* __ASM_SH_PCI_H */
diff --git a/arch/sh/kernel/cpu/Makefile b/arch/sh/kernel/cpu/Makefile
index 46118236bf04..e462a9552c92 100644
--- a/arch/sh/kernel/cpu/Makefile
+++ b/arch/sh/kernel/cpu/Makefile
@@ -16,6 +16,10 @@ obj-$(CONFIG_ARCH_SHMOBILE)	+= shmobile/
 # Common interfaces.
 
 obj-$(CONFIG_SH_ADC)		+= adc.o
+ifndef CONFIG_COMMON_CLK
 obj-$(CONFIG_SH_CLK_CPG_LEGACY)	+= clock-cpg.o
-
-obj-y	+= irq/ init.o clock.o fpu.o pfc.o proc.o
+endif
+ifndef CONFIG_GENERIC_IRQ_CHIP
+obj-y	+= irq/
+endif
+obj-y	+= init.o clock.o fpu.o pfc.o proc.o
diff --git a/arch/sh/kernel/cpu/clock.c b/arch/sh/kernel/cpu/clock.c
index 6fb34410d630..e6c75d4ba7e1 100644
--- a/arch/sh/kernel/cpu/clock.c
+++ b/arch/sh/kernel/cpu/clock.c
@@ -14,12 +14,13 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/of.h>
 #include <asm/clock.h>
 #include <asm/machvec.h>
 
 int __init clk_init(void)
 {
-	int ret;
+	int ret = 0;
 
 #ifndef CONFIG_COMMON_CLK
 	ret = arch_clk_init();
diff --git a/arch/sh/kernel/cpu/sh4/Makefile b/arch/sh/kernel/cpu/sh4/Makefile
index 00c16331e07e..1e196c320b96 100644
--- a/arch/sh/kernel/cpu/sh4/Makefile
+++ b/arch/sh/kernel/cpu/sh4/Makefile
@@ -15,6 +15,7 @@ perf-$(CONFIG_CPU_SUBTYPE_SH7750)	:= perf_event.o
 perf-$(CONFIG_CPU_SUBTYPE_SH7750S)	:= perf_event.o
 perf-$(CONFIG_CPU_SUBTYPE_SH7091)	:= perf_event.o
 
+ifndef CONFIG_OF
 # CPU subtype setup
 obj-$(CONFIG_CPU_SUBTYPE_SH7750)	+= setup-sh7750.o
 obj-$(CONFIG_CPU_SUBTYPE_SH7750R)	+= setup-sh7750.o
@@ -32,6 +33,7 @@ endif
 
 # Additional clocks by subtype
 clock-$(CONFIG_CPU_SUBTYPE_SH4_202)	+= clock-sh4-202.o
+endif
 
 obj-y					+= $(clock-y)
 obj-$(CONFIG_PERF_EVENTS)		+= $(perf-y)
-- 
2.39.2
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.