Re: [RFC PATCH v2 26/30] arch/sh: RTS7751R2D Plus DeviceTree.
Geert Uytterhoeven <[email protected]>
| Newsgroups | gmane.linux.ports.sh.devel |
|---|---|
| Message-ID | <CAMuHMdUUEhev1F40FhiJyCENvca9YTx_hv1gT_DTXyVMCKjU8g@mail.gmail.com> |
Hi Sato-san, On Wed, Sep 13, 2023 at 11:24 AM Yoshinori Sato <[email protected]> wrote: > Signed-off-by: Yoshinori Sato <[email protected]> Thanks for your patch! > --- /dev/null > +++ b/arch/sh/boot/dts/rts7751r2dplus.dts > @@ -0,0 +1,124 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Device Tree Source for the Renesas RTS7751R2D Plus > + */ > + > +/dts-v1/; > + > +#include "sh7751.dtsi" #include "sh7751r.dtsi"? To make that work, you can create "sh7751.dtsi" that includes "sh7751.dtsi" and overrides the parts that are different. > + > +/ { > + model = "Renesas RTS7715R2D Plus"; > + compatible = "renesas,r2dplus"; compatible = "renesas,r2dplus", "renesas,sh7751r", "renesas,sh7751". And all these compatible values must be documented in the DT binding documentation. > + #address-cells = <1>; > + #size-cells = <1>; > + interrupt-parent = <&shintc>; > + > + aliases { > + serial0 = &scif1; > + }; > + > + chosen { > + }; > + > + clocks { > + xtal: oscillator { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <22222222>; > + }; Please > + > + cpg: cpg@ffc00000 { "&cpg"? > + compatible = "renesas,sh7750r-cpg", > + "renesas,sh7750-cpg"; There should be no need to override the cpg's compatible value. > + renesas,mode = <5>; > + }; > + }; > + > + cpus { > + cpu@0 { > + clock-frequency = <266666666>; As the CPU clock is programmable, the "clock-frequency" property should probably be replaced by a "clocks" property in the base sh7751.dtsi. > + }; > + }; > + > + memory@c000000 { > + device_type = "memory"; > + reg = <0x0c000000 0x4000000>; > + }; > + > + r2dintc: sh7751irl_encoder@a4000000 { > + compatible = "renesas,sh7751-irl-ext"; > + reg = <0xa4000000 0x02>; > + interrupt-controller; > + #address-cells = <1>; > + #interrupt-cells = <2>; > + sh7751irl,width = <16>; > + sh7751irl,polarity = <0>; > + sh7751irl,irqbit =<11>, /* PCI INTD */ > + <9>, /* CF IDE */ > + <8>, /* CF CD */ > + <12>, /* PCI INTC */ > + <10>, /* SM501 */ > + <6>, /* KEY */ > + <5>, /* RTC ALARM */ > + <4>, /* RTC T */ > + <7>, /* SDCARD */ > + <14>, /* PCI INTA */ > + <13>, /* PCI INTB */ > + <0>, /* EXT */ > + <15>; /* TP */ > + }; > + > + display@1,0 { > + compatible = "smi,sm501"; > + reg = <0x10000000 0x03e00000 > + 0x13e00000 0x00200000>; > + interrupt-parent = <&r2dintc>; > + interrupts = <4 0>; > + mode = "640x480-16@60"; > + little-endian; > + sm501,devices = "usb-host","uart0"; > + }; > + > + compact-flash@b4001000 { > + compatible = "ata-generic"; compact-flash@b4001000: compatible:0: 'ata-generic' is not one of ['arm,vexpress-cf', 'fsl,mpc8349emitx-pata'] from schema $id: http://devicetree.org/schemas/ata/ata-generic.yaml# > + reg = <0xb4001000 0x0e>, <0xb400080c 2>; > + reg-shift = <1>; > + interrupt-parent = <&r2dintc>; > + interrupts = <1 0>; > + }; > + > + flash@0 { > + compatible = "cfi-flash"; > + reg = <0x00000000 0x02000000>; > + device-width = <2>; > + #address-cells = <1>; > + #size-cells = <1>; > + partition@0 { > + label = "U-Boot"; > + reg = <0x00000000 0x00040000>; > + }; > + partition@1 { > + label = "Environemt"; Environment > + reg = <0x00040000 0x00040000>; > + }; Several of the above comments apply to "[RFC PATCH v2 27/30] arch/sh: LANDISK DeviceTree." and "[RFC PATCH v2 28/30] arch/sh: USL-5P DeviceTree.", too. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected] In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds