[DO NOT MERGE v5 12/37] dt-bindings: pci: pci-sh7751: Add SH7751 PCI

Yoshinori Sato <[email protected]>
Newsgroups gmane.linux.ports.sh.devel,gmane.linux.ide,gmane.linux.drivers.devicetree,gmane.linux.kernel,gmane.linux.kernel.renesas-soc,gmane.linux.kernel.clk,gmane.comp.video.dri.devel,gmane.linux.kernel.pci,gmane.linux.serial
Message-ID <ca3122511b201a0da0a3f930c0f894bf11954423.1701768028.git.ysato@users.sourceforge.jp>
Renesas SH7751 PCI Controller json-schema.

Signed-off-by: Yoshinori Sato <[email protected]>
---
 .../bindings/pci/renesas,sh7751-pci.yaml      | 128 ++++++++++++++++++
 1 file changed, 128 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml

diff --git a/Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml b/Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml
new file mode 100644
index 000000000000..c71ed56b7210
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/renesas,sh7751-pci.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/renesas,sh7751-pci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas SH7751 PCI Host controller
+
+maintainers:
+  - Yoshinori Sato <[email protected]>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,sh7751-pci
+
+  reg:
+    minItems: 2
+    maxItems: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  ranges: true
+
+  interrupt-controller: true
+
+  renesas,memory:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      PCI BMDMA src/dst memory area.
+
+  renesas,bcr1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCIBCR1 value. This value makes add the value of BSC's BCR1.
+
+  renesas,mcrmask:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCIMCR value. This value makes clear bit in the value of BSC's MCR.
+
+  renesas,intm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCIINTM value.
+
+  renesas,aintm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCIIANTM value.
+
+  renesas,lsr:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCILSR0 and PCILSR1 values.
+      First word is PCILSR0, Second word is PCILSR1.
+
+  renesas,lar:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCILSA0 and PCILAR1 values.
+      First word is PCILAR0, Second word is PCILAR1.
+
+  renesas,dmabt:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCIDMABT value.
+
+  renesas,pintm:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      SH7751 PCIC PCIPINTM value.
+
+  renesas,config:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      SH7751 PCIC PCICONFIG values array. Register Number and value pair list.
+
+required:
+  - compatible
+  - reg
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - interrupt-map
+  - interrupt-map-mask
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pci@fe200000 {
+            compatible = "renesas,sh7751-pci";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            device_type = "pci";
+            bus-range = <0 0>;
+            ranges = <0x02000000 0 0xfd000000 0xfd000000 0 0x01000000>,
+                     <0x01000000 0 0x00000000 0xfe240000 0 0x00040000>;
+            reg = <0xfe200000 0x0400>,
+                  <0xff800000 0x0100>;
+            interrupt-map = <0x0000 0 0 1 &julianintc 5>,
+                            <0x0000 0 0 2 &julianintc 6>,
+                            <0x0000 0 0 3 &julianintc 7>,
+                            <0x0000 0 0 4 &julianintc 8>,
+                            <0x0800 0 0 1 &julianintc 6>,
+                            <0x0800 0 0 2 &julianintc 7>,
+                            <0x0800 0 0 3 &julianintc 8>,
+                            <0x0800 0 0 4 &julianintc 5>,
+                            <0x1000 0 0 1 &julianintc 7>,
+                            <0x1000 0 0 2 &julianintc 8>,
+                            <0x1000 0 0 3 &julianintc 5>,
+                            <0x1000 0 0 4 &julianintc 6>;
+            interrupt-map-mask = <0x1800 0 0 7>;
+    };
-- 
2.39.2
lmpx.com only provides a reader for public news (NNTP) servers. It is not affiliated with the servers or forums shown here and is not responsible for the content of articles, which is written by their respective authors.