[PATCH v2 33/57] irqdomain: sh: Switch to irq_domain_create_*()

irq_domain_add_*() interfaces are going away as being obsolete now.
Switch to the preferred irq_domain_create_*() ones. Those differ in the
node parameter: They take more generic struct fwnode_handle instead of
struct device_node. Therefore, of_fwnode_handle() is added around the
original parameter.

Note some of the users can likely use dev->fwnode directly instead of
indirect of_fwnode_handle(dev->of_node). But dev->fwnode is not
guaranteed to be set for all, so this has to be investigated on case to
case basis (by people who can actually test with the HW).

Signed-off-by: Jiri Slaby (SUSE) <[email protected]>
Cc: Yoshinori Sato <[email protected]>
Cc: Rich Felker <[email protected]>
Cc: John Paul Adrian Glaubitz <[email protected]>
Cc: [email protected]
---
 arch/sh/boards/mach-se/7343/irq.c  | 5 +++--
 arch/sh/boards/mach-se/7722/irq.c  | 2 +-
 arch/sh/boards/mach-x3proto/gpio.c | 2 +-
 drivers/sh/intc/irqdomain.c        | 5 ++---
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/sh/boards/mach-se/7343/irq.c b/arch/sh/boards/mach-se/7343/irq.c
index f9f3b14f70d5..8241bdedcc82 100644
--- a/arch/sh/boards/mach-se/7343/irq.c
+++ b/arch/sh/boards/mach-se/7343/irq.c
@@ -47,8 +47,9 @@ static void __init se7343_domain_init(void)
 {
 	int i;
 
-	se7343_irq_domain = irq_domain_add_linear(NULL, SE7343_FPGA_IRQ_NR,
-						  &irq_domain_simple_ops, NULL);
+	se7343_irq_domain = irq_domain_create_linear(NULL, SE7343_FPGA_IRQ_NR,
+						     &irq_domain_simple_ops,
+						     NULL);
 	if (unlikely(!se7343_irq_domain)) {
 		printk("Failed to get IRQ domain\n");
 		return;
diff --git a/arch/sh/boards/mach-se/7722/irq.c b/arch/sh/boards/mach-se/7722/irq.c
index efa96edd47dc..9a460a81907f 100644
--- a/arch/sh/boards/mach-se/7722/irq.c
+++ b/arch/sh/boards/mach-se/7722/irq.c
@@ -46,7 +46,7 @@ static void __init se7722_domain_init(void)
 {
 	int i;
 
-	se7722_irq_domain = irq_domain_add_linear(NULL, SE7722_FPGA_IRQ_NR,
+	se7722_irq_domain = irq_domain_create_linear(NULL, SE7722_FPGA_IRQ_NR,
 						  &irq_domain_simple_ops, NULL);
 	if (unlikely(!se7722_irq_domain)) {
 		printk("Failed to get IRQ domain\n");
diff --git a/arch/sh/boards/mach-x3proto/gpio.c b/arch/sh/boards/mach-x3proto/gpio.c
index f82d3a6a844a..c13d51b29702 100644
--- a/arch/sh/boards/mach-x3proto/gpio.c
+++ b/arch/sh/boards/mach-x3proto/gpio.c
@@ -108,7 +108,7 @@ int __init x3proto_gpio_setup(void)
 	if (unlikely(ret))
 		goto err_gpio;
 
-	x3proto_irq_domain = irq_domain_add_linear(NULL, NR_BASEBOARD_GPIOS,
+	x3proto_irq_domain = irq_domain_create_linear(NULL, NR_BASEBOARD_GPIOS,
 						   &x3proto_gpio_irq_ops, NULL);
 	if (unlikely(!x3proto_irq_domain))
 		goto err_irq;
diff --git a/drivers/sh/intc/irqdomain.c b/drivers/sh/intc/irqdomain.c
index 3968f1c3c5c3..ed7a570ffdf2 100644
--- a/drivers/sh/intc/irqdomain.c
+++ b/drivers/sh/intc/irqdomain.c
@@ -59,10 +59,9 @@ void __init intc_irq_domain_init(struct intc_desc_int *d,
 	 * tree penalty for linear cases with non-zero hwirq bases.
 	 */
 	if (irq_base == 0 && irq_end == (irq_base + hw->nr_vectors - 1))
-		d->domain = irq_domain_add_linear(NULL, hw->nr_vectors,
-						  &intc_evt_ops, NULL);
+		d->domain = irq_domain_create_linear(NULL, hw->nr_vectors, &intc_evt_ops, NULL);
 	else
-		d->domain = irq_domain_add_tree(NULL, &intc_evt_ops, NULL);
+		d->domain = irq_domain_create_tree(NULL, &intc_evt_ops, NULL);
 
 	BUG_ON(!d->domain);
 }
-- 
2.49.0