Kconfig dangling references (BZ 216748)
Randy Dunlap <[email protected]>
| Newsgroups | gmane.linux.sound,gmane.linux.kernel,gmane.linux.ports.arm.omap,gmane.comp.hardware.openbmc,gmane.linux.ports.mips,gmane.comp.video.dri.devel,gmane.linux.ports.arm.kernel,gmane.linux.kernel.gpio,gmane.linux.ports.sh.devel |
|---|---|
| Message-ID | <[email protected]> |
from https://bugzilla.kernel.org/show_bug.cgi?id=216748 The bugzilla entry includes a Perl script and a shell script. This is the edited result of running them (I removed some entries that were noise). I'll try to Cc: all of the relevant mailing lists or individuals. ARCH_HAS_HOLES_MEMORYMODEL --- arch/arm/mach-omap1/Kconfig:7: select ARCH_HAS_HOLES_MEMORYMODEL ARM_ERRATA_794072 --- arch/arm/mach-npcm/Kconfig:33: select ARM_ERRATA_794072 ARM_SMC_MBOX --- arch/arm64/Kconfig.platforms:375: select ARM_SMC_MBOX CLK_FIXED_FCH --- sound/soc/amd/Kconfig:11: select CLK_FIXED_FCH sound/soc/amd/Kconfig:48: select CLK_FIXED_FCH sound/soc/amd/acp/Kconfig:107: select CLK_FIXED_FCH CONFIG_STM --- drivers/hwtracing/stm/Kconfig:16: default CONFIG_STM # should be STM drivers/hwtracing/stm/Kconfig:31: default CONFIG_STM CPU_HAS_LOAD_STORE_LR --- arch/mips/Kconfig:1411: select CPU_HAS_LOAD_STORE_LR DRM_KMS_DMA_HELPER --- drivers/gpu/drm/adp/Kconfig:9: select DRM_KMS_DMA_HELPER drivers/gpu/drm/logicvc/Kconfig:7: select DRM_KMS_DMA_HELPER EXTCON_TCSS_CROS_EC --- drivers/usb/typec/ucsi/Kconfig:76: depends on !EXTCON_TCSS_CROS_EC MACH_JZ4755 --- drivers/clk/ingenic/Kconfig:20: default MACH_JZ4755 drivers/pinctrl/pinctrl-ingenic.c:158: IS_ENABLED(CONFIG_MACH_JZ4755) << ID_JZ4755 | drivers/pinctrl/pinctrl-ingenic.c:4616: .data = IF_ENABLED(CONFIG_MACH_JZ4755, &jz4755_chip_info) MACH_JZ4760 --- drivers/clk/ingenic/Kconfig:40: default MACH_JZ4760 drivers/pinctrl/pinctrl-ingenic.c:159: IS_ENABLED(CONFIG_MACH_JZ4760) << ID_JZ4760 | drivers/pinctrl/pinctrl-ingenic.c:4620: .data = IF_ENABLED(CONFIG_MACH_JZ4760, &jz4760_chip_info) drivers/pinctrl/pinctrl-ingenic.c:4624: .data = IF_ENABLED(CONFIG_MACH_JZ4760, &jz4760_chip_info) MACH_STM32MP25 --- drivers/pinctrl/stm32/Kconfig:58: default MACH_STM32MP25 || (ARCH_STM32 && ARM64) MFD_AIROHA_AN8855 --- drivers/nvmem/Kconfig:33: depends on MFD_AIROHA_AN8855 || COMPILE_TEST MFD_TN48M_CPLD --- drivers/gpio/Kconfig:1624: depends on MFD_TN48M_CPLD || COMPILE_TEST drivers/reset/Kconfig:365: depends on MFD_TN48M_CPLD || COMPILE_TEST drivers/reset/Kconfig:366: default MFD_TN48M_CPLD MIPS_BAIKAL_T1 --- drivers/ata/Kconfig:197: select MFD_SYSCON if (MIPS_BAIKAL_T1 || COMPILE_TEST) drivers/bus/Kconfig:43: depends on MIPS_BAIKAL_T1 || COMPILE_TEST drivers/bus/Kconfig:58: depends on MIPS_BAIKAL_T1 || COMPILE_TEST drivers/clk/baikal-t1/Kconfig:4: depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST drivers/clk/baikal-t1/Kconfig:5: default MIPS_BAIKAL_T1 drivers/clk/baikal-t1/Kconfig:20: default MIPS_BAIKAL_T1 drivers/clk/baikal-t1/Kconfig:33: default MIPS_BAIKAL_T1 drivers/clk/baikal-t1/Kconfig:45: default MIPS_BAIKAL_T1 drivers/hwmon/Kconfig:462: depends on MIPS_BAIKAL_T1 || COMPILE_TEST drivers/i2c/busses/Kconfig:589: select MFD_SYSCON if MIPS_BAIKAL_T1 drivers/memory/Kconfig:69: depends on MIPS_BAIKAL_T1 || COMPILE_TEST drivers/mtd/maps/Kconfig:81: depends on MIPS_BAIKAL_T1 || COMPILE_TEST drivers/pci/controller/dwc/Kconfig:89: depends on MIPS_BAIKAL_T1 || COMPILE_TEST drivers/spi/Kconfig:370: depends on MIPS_BAIKAL_T1 || COMPILE_TEST PINCTRL_MILBEAUT --- arch/arm/mach-milbeaut/Kconfig:16: select PINCTRL_MILBEAUT SND_SOC_AC97_BUS_NEW --- sound/soc/pxa/Kconfig:21: select SND_SOC_AC97_BUS_NEW SND_SOC_CS35L56_CAL_SYSFS_COMMON --- sound/soc/codecs/Kconfig:920: select SND_SOC_CS35L56_CAL_SYSFS_COMMON TEST_KUNIT_DEVICE_HELPERS --- drivers/iio/test/Kconfig:11: select TEST_KUNIT_DEVICE_HELPERS USB_HSIC_USB3613 --- drivers/staging/greybus/Kconfig:209: depends on USB_HSIC_USB3613 || COMPILE_TEST drivers/staging/greybus/arche-platform.c:26:#if IS_ENABLED(CONFIG_USB_HSIC_USB3613) USB_OHCI_SH --- arch/sh/Kconfig:334: select USB_OHCI_SH if USB_OHCI_HCD arch/sh/Kconfig:344: select USB_OHCI_SH if USB_OHCI_HCD arch/sh/Kconfig:429: select USB_OHCI_SH if USB_OHCI_HCD arch/sh/Kconfig:455: select USB_OHCI_SH if USB_OHCI_HCD arch/sh/configs/sh7757lcr_defconfig:61:CONFIG_USB_OHCI_SH=y X86_P6_NOP --- arch/x86/Kconfig.cpufeatures:41: depends on X86_64 || X86_P6_NOP arch/x86/Makefile_32.cpu:48:ifneq ($(CONFIG_X86_P6_NOP),y) XTENSA_PLATFORM_ESP32 --- drivers/tty/serial/Kconfig:1598: depends on XTENSA_PLATFORM_ESP32 || (COMPILE_TEST && OF) drivers/tty/serial/Kconfig:1611: depends on XTENSA_PLATFORM_ESP32 || (COMPILE_TEST && OF) -- ~Randy