[PATCH 2/6] [v6] Input: gpio-keys: make legacy gpiolib optional
Arnd Bergmann <[email protected]> Fri, 10 Jul 2026 23:18:50 +0200
| Newsgroups | gmane.linux.ports.sh.devel,gmane.linux.kernel.gpio,gmane.linux.kernel,gmane.linux.kernel.input,gmane.linux.leds |
|---|---|
| Message-ID | <[email protected]> |
From: Arnd Bergmann <[email protected]> Most users of gpio-keys and gpio-keys-polled use modern gpiolib interfaces, but there are still number of ancient sh, arm32 and x86 machines that have never been converted. Add an #ifdef block for the parts of the driver that are only used on those legacy machines. The two Rohm PMIC drivers use a gpio-keys device without an actual GPIO, passing an IRQ number instead. In order to keep this working both with and with CONFIG_GPIOLIB_LEGACY, change the gpio-keys driver to ignore the gpio number if an IRQ is passed. Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/all/[email protected]/ Acked-by: Bartosz Golaszewski <[email protected]> Acked-by: Dmitry Torokhov <[email protected]> # for input Signed-off-by: Arnd Bergmann <[email protected]> --- v3..v5: resend v2: skip the fake GPIO number passing from mfd This patch now has a small conflict with the rework of the rohm drivers to use software nodes. That patch is the one we want, and then the drivers/mfd changes here can get dropped, but the two need to get merged in the correct order. --- drivers/input/keyboard/gpio_keys.c | 9 +++++---- drivers/input/keyboard/gpio_keys_polled.c | 4 +++- drivers/mfd/rohm-bd71828.c | 1 - drivers/mfd/rohm-bd718x7.c | 1 - include/linux/gpio_keys.h | 2 ++ 5 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index e19617485679..e988657f97cb 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -23,8 +23,8 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/workqueue.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> +#include <linux/gpio/legacy.h> #include <linux/of.h> #include <linux/of_irq.h> #include <linux/spinlock.h> @@ -528,7 +528,8 @@ static int gpio_keys_setup_key(struct platform_device *pdev, */ bdata->gpiod = NULL; } - } else if (gpio_is_valid(button->gpio)) { +#ifdef CONFIG_GPIOLIB_LEGACY + } else if (!button->irq && gpio_is_valid(button->gpio)) { /* * Legacy GPIO number, so request the GPIO here and * convert it to descriptor. @@ -546,6 +547,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev, if (button->active_low ^ gpiod_is_active_low(bdata->gpiod)) gpiod_toggle_active_low(bdata->gpiod); +#endif } if (bdata->gpiod) { @@ -583,8 +585,7 @@ static int gpio_keys_setup_key(struct platform_device *pdev, if (irq < 0) { error = irq; dev_err_probe(dev, error, - "Unable to get irq number for GPIO %d\n", - button->gpio); + "Unable to get irq number for GPIO\n"); return error; } bdata->irq = irq; diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c index e6707d72210e..4e7a366ff05b 100644 --- a/drivers/input/keyboard/gpio_keys_polled.c +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -18,8 +18,8 @@ #include <linux/input.h> #include <linux/ioport.h> #include <linux/platform_device.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> +#include <linux/gpio/legacy.h> #include <linux/gpio_keys.h> #include <linux/property.h> @@ -301,6 +301,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev) return dev_err_probe(dev, PTR_ERR(bdata->gpiod), "failed to get gpio\n"); } +#ifdef CONFIG_GPIOLIB_LEGACY } else if (gpio_is_valid(button->gpio)) { /* * Legacy GPIO number so request the GPIO here and @@ -323,6 +324,7 @@ static int gpio_keys_polled_probe(struct platform_device *pdev) if (button->active_low ^ gpiod_is_active_low(bdata->gpiod)) gpiod_toggle_active_low(bdata->gpiod); +#endif } bdata->last_state = -1; diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c index a79f354bf5cb..df6dad762ec9 100644 --- a/drivers/mfd/rohm-bd71828.c +++ b/drivers/mfd/rohm-bd71828.c @@ -39,7 +39,6 @@ static struct gpio_keys_button button = { .code = KEY_POWER, - .gpio = -1, .type = EV_KEY, .wakeup = 1, }; diff --git a/drivers/mfd/rohm-bd718x7.c b/drivers/mfd/rohm-bd718x7.c index ff714fd4f54d..dd774aa8828b 100644 --- a/drivers/mfd/rohm-bd718x7.c +++ b/drivers/mfd/rohm-bd718x7.c @@ -20,7 +20,6 @@ static struct gpio_keys_button button = { .code = KEY_POWER, - .gpio = -1, .type = EV_KEY, }; diff --git a/include/linux/gpio_keys.h b/include/linux/gpio_keys.h index 80fa930b04c6..e8d6dc290efb 100644 --- a/include/linux/gpio_keys.h +++ b/include/linux/gpio_keys.h @@ -25,7 +25,9 @@ struct device; */ struct gpio_keys_button { unsigned int code; +#ifdef CONFIG_GPIOLIB_LEGACY int gpio; +#endif int active_low; const char *desc; unsigned int type; -- 2.39.5