[linux-sh:03278] reg. compactflash access on SH7751 solution engine
R Vijay <[email protected]> Tue, 6 Jul 2004 08:05:19 -0700 (PDT)
| Newsgroups | gmane.linux.ports.sh.general,gmane.linux.ports.sh.devel |
|---|---|
| Message-ID | <[email protected]> |
Hi, I am trying to deploy kernel 2.4.26 on SH 7751 SE01, and i want to access Compactflash, i have tried Hitachi companion chip selection and related option but no luck. I have got the patch for SH7750 Solution engine posted earlier on the list but seems that it is not suitable for this board. I am attatching log with this mail. If there is something else to be done to make it up? Thanks in advance. Vijay Linux version 2.4.26 (root@enigma) (gcc version 3.2.3) #73 Tue Jul 6 19:12:49 IST 2004 lnx image start : 0x00000000, prompt : 0, load = 1 the values initrd start : 0x8c105000, initrd end : 0x8c405000 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: console=ttySC1,115200 root=/dev/hda1 mem=32M init=/bin/init chimera : checking line here, got line=hda1 : rootäevname=hda1Setting GDB trap vector to 0x8c000100 CPU clock: 162.03MHz Bus clock: 27.00MHz On node 0 totalpages: 8192 On node 0 totalpages: 8192 zone(0): 8192 pages. zone(0): 8192 pages. zone(1): 0 pages. zone(1): 0 pages. zone(2): 0 pages. zone(2): 0 pages. Kernel command line: console=ttySC1,115200 root=/dev/hda1 mem=32M CPU clock: 162.03MHz Bus clock: 27.00MHz Module clock: 27.00MHz Calibrating delay loop... 161.38 BogoMIPS Memory: 28288k/32768k available (4480k reserved including: 749k kernel code, 33k data, 168k BSS, 48k init, 352k page map) Dentry cache hash table entries: 4096 (order: 3, 32768 bytes) Inode cache hash table entries: 2048 (order: 2, 16384 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 8192 (order: 3, 32768 bytes) CPU: SH7751 POSIX coîformance testing by UNIFIX PCI: Using configuration type 1 SH7751 PCI: Finished initialization of the PCI controller PCI: Bad IRQ mapping request for slot 12 PCI: Bad IRQ mapping requesô for slot 15 Linux NET4.0 for Linux 2.4 Based upon Swansea Universitù Computer Society NET3.039 Initializing RT netlink socket HD64461 configured at 0xb0000000 on irq 36(mapped into 72 to 87) HD64461: enabling PCMCIA devices HD64465 configured at 0xb0000000 on irq 5(mapped into 72 to 87) HD64465 device ID not found, check base address HD64465 hardware revision 255.255 HD64465 GPIO layer on irq 83 Starôing kswapd pty: 256 Unix98 ptys configured SuperH SCI(F) driver initialized ttySC0 at 0xffe00000 is a SCI ttySC1 at 0xffe80000 is a SCIF RAMDISK driver initialized: 16 RAM disks of 12288K size 1024 blocksize SCSI subsystem driver Revision: 1.00 VFS: Cannot open root device "hda1" or 03:01 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 03:01 --------------------------------- Do you Yahoo!? Yahoo! Mail - You care about security. So do we.