Re: IDE lost interrupt issue

I had the same problem; look at the mailing list archive searching IDE=20
troubles and my nick (fgiovag). Now I don't remember exactly how I solved i=
t.
Try and let me know.

Ciao

=46abio

Alle 10:45, mercoled=EC 9 febbraio 2005, R Vijay ha scritto:
> Hi Every one,
>
> We are facing severe problem with ide remount on
> ms7751rCP01.  At present if we keep root partition in
> read only mode it works fine but if we remount it to
> RW mode it starts giving us followoing erros...
>
> I have attatched the log with this mail.
>
> Please give your suggestion regarding this.
>
> We have tried various options like : "ata66", "slow",
> "nodma" but they dont help much
> Moreover the MultiMode Support which is kept for such
> error also fails..
>
> thanks in advance,
> best regards.
> Vijay
>
> Linux version 2.4.26-uc0 (gcc version 3.2.3) #558 Tue
> Feb 8 11:30:56 IST 2005
> On node 0 totalpages: 16384
> zone(0): 16384 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Kernel command line:
> ide_setup: hdb=3Dnone
> Allocating irq for 0x1f0
> Allocating irq for 0x170
> Allocating irq for 0x0
> Allocating irq for 0x0
> ide_setup: hdc=3Dnone
> ide_setup: hdd=3Dnone
> ide_setup: hde=3Dnone
> ide_setup: hdf=3Dnone
> ide_setup: hda=3Dflash
> ide_setup: hda=3Dslow
> CPU clock: 239.94MHz
> Bus clock: 59.98MHz
> Module clock: 59.98MHz
> Calibrating delay loop... 239.20 BogoMIPS
> Memory: 63748k/65536k available (1788k reserved
> including: 761k kernel code, 36k data, 181k BSS, 48k
> init, 704k page map)
> Dentry cache hash table entries: 8192 (order: 4, 65536
> bytes)
> Inode cache hash table entries: 4096 (order: 3, 32768
> bytes)
> Mount cache hash table entries: 512 (order: 0, 4096
> bytes)
> Buffer cache hash table entries: 4096 (order: 2, 16384
> bytes)
> Page-cache hash table entries: 16384 (order: 4, 65536
> bytes)
> CPU: SH7751R
> POSIX conformance testing by UNIFIX
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society
> NET3.039
>
>
>
> Initializing CF...
> Starting kswapd
> pty: 256 Unix98 ptys configured
> Uniform Multi-Platform E-IDE driver Revision:
> 7.00beta4-2.4
> ide: Assuming 50MHz system bus speed for PIO modes;
> override with idebus=3Dxx
> probing for hda: present=3D0, media=3D32, probetype=3DATA
> hda: Hitachi XXM2.3.0, CFA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hda: attached ide-disk driver.
> hda: task_no_data_intr: status=3D0x51 { DriveReady
> SeekComplete Error }
> hda: task_no_data_intr: error=3D0x04 { DriveStatusError
> }
> hda: 500400 sectors (256 MB) w/1KiB Cache,
> CHS=3D695/15/48
> Partition check:
> hda: hda1
> VFS: Mounted root (ext2 filesystem) readonly.
> Freeing unused kernel memory: 48k freed
> sh-2.05a# mount -n -o proc /proc
> sh-2.05a# mount -n -o remount,rw /
> EXT2-fs warning: mounting unchecked fs, running e2fsck
> is recommended
> hda: lost interrupt
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> ide0: reset: success
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> hda: drive not ready for command
> ide0: reset: success
> hda: lost interrupt
> hda: status error: status=3D0x58 { DriveReady
> SeekComplete DataRequest }
>
>
>
> end_request: I/O error, dev 03:01 (hda), sector 3
> hda: drive not ready for command
> sh-2.05a# hda: lost interrupt
>
>
>
> __________________________________
> Do you Yahoo!?
> The all-new My Yahoo! - What will yours do?
> http://my.yahoo.com
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=3D6595&alloc_id=3D14396&op=3Dclick
> _______________________________________________
> linuxsh-dev mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/linuxsh-dev


-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click