Re: [Linux-fbdev-devel] Help re Frame Buffer/Console Problems

On Saturday 30 October 2004 02:22, Mark Fortescue wrote:
> Hi all,
>
> I have been trying to get a CG3 sparc clone up and running with linux.
> Under 2.2.26, the console is fine. During the development of the
> 2.5.x/2.6.x frame buffer system the CG3 support got broken. I have managed
> to track done one of the problems (the blanking code had some typing
> errors in it) and this gave me a logo + black screen and cursor using a
> linux-2.2.8.1 kernel. Still no console text.
>
> Given that 2.2.10-rc1-bk6 is available, I have downloaded and applied the
> appropriate patches and made some additional mods to keep the
> compiler/linker happy. Now I have a black console, no text, logo or cursor
> and if I redirect the console output to a serial port I get the following:

I'm assuming 2.6.10-rc1-bk6...

Make sure you correctly fill up the red, green, blue, and transp fields
in all->info.var.  You can do it in sbufsfb_fill_var, or somewhere
within cg3.c before the register_framebuffer() part.

As a reminder, info->var and info->fix must be valid prior to framebuffer
registration.

Tony