Re: Desperate after upgrading OBP from 3.11 to 3.31

Hi Ben,

Thanks for responding. I have, but to no avail. I've tried running SILO 
with multiple exotic combinations such as -f and -u to force it to 
rewrite the bootblock for my Ultra. What I don't understand is how the 
boot sector could get corrupted in the first place. I've also tried 
putting the first partition back at 'Start = 0' now; no deal.

Kind regards,

Arnim

Ben Collins wrote:
> After booting from CD, rerun the silo command. Sounds like your boot
> sector got corrupted, or you moved second.b on your filesystem without
> rerunning silo.
> 
> On Sun, Jul 10, 2005 at 12:12:25AM +0200, A. Eijkhoudt wrote:
> 
>>Hello all,
>>
>>I've upgraded my OBP from 3.11 to 3.31 and now my SUN won't boot 
>>anymore. Whatever I try at the 'ok' prompt has no effect, it keeps 
>>saying 'The file just loaded does not appear to be executable'. I've 
>>tried pretty much all versions of 'boot disk#:#' by now. The system in 
>>question is a SUN Ultra10, 300MHz, 320MB RAM, 40GB HD Maxtor 6E040L.
>>
>>Partition layout:
>>
>><snip>
>>Disk /dev/ide/host0/bus0/target0/lun0/disc (Sun disk label): 16 heads, 
>>63 sectors, 16383 cylinders
>>Units = cylinders of 1008 * 512 bytes
>>
>>                                Device Flag    Start       End 
>>Blocks   Id  System
>>/dev/ide/host0/bus0/target0/lun0/part1             1       101     50400 
>>  83  Linux native
>>/dev/ide/host0/bus0/target0/lun0/part2           101     79144  39837672 
>>  83  Linux native
>>/dev/ide/host0/bus0/target0/lun0/part3             0     79656  40146624 
>>   5  Whole disk
>>/dev/ide/host0/bus0/target0/lun0/part4  u      79147     79655    256032 
>>  82  Linux swap
>>
>>Disk /dev/ide/host0/bus0/target0/lun0/part3 (Sun disk label): 16 heads, 
>>63 sectors, 16383 cylinders
>>Units = cylinders of 1008 * 512 bytes
>>
>>                                 Device Flag    Start       End 
>>Blocks   Id  System
>>/dev/ide/host0/bus0/target0/lun0/part3p1             1       101 
>>50400   83  Linux native
>>/dev/ide/host0/bus0/target0/lun0/part3p2           101     79144 
>>39837672   83  Linux native
>>/dev/ide/host0/bus0/target0/lun0/part3p3             0     79656 
>>40146624    5  Whole disk
>>/dev/ide/host0/bus0/target0/lun0/part3p4  u      79147     79655 
>>256032   82  Linux swap
>></snip>
>>
>>As you can see, I can boot fine from CD...
>>
>>My SILO configuration:
>>
>><snip>
>>partition=1
>>root=/dev/hda2
>>timeout=10
>>device=/dev/hda
>>image=/boot/2.6.12
>>        label=linux
>>image=/boot/2.6.12-old
>>        label=old
>></snip>
>>
>>This is all correct:
>>
>><snip>
>>livecd ~ # ls /boot/
>>2.6.12      System.map         System.map-2.6.12-old  fd.b     generic.b 
>> isofs.b     old.b     silo.conf   ultra.b
>>2.6.12-old  System.map-2.6.12  boot                   first.b  ieee32.b 
>>  lost+found  second.b  silotftp.b
>></snip>
>>
>>Running SILO yields no errors... Can someone please help? There has to 
>>be a simple way of fixing this, and I really don't believe I'm the only 
>>one who has ever had this problem either. I've already spent 5(!) hours 
>>reading every single search result I could find on Google and on the 
>>Gentoo forums about this... My SUN is pretty much dead in the water 
>>right now, as I don't feel like booting from a LiveCD just to get it 
>>beyond the OpenBoot POST.
>>
>>Kind regards,
>>
>>Arnim Eijkhoudt
>>-
>>To unsubscribe from this list: send the line "unsubscribe sparclinux" in
>>the body of a message to [email protected]
>>More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
-
To unsubscribe from this list: send the line "unsubscribe sparclinux" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html